| |
KA3VSP > ALL 30.03.25 14:30l 19 Lines 636 Bytes #999 (0) @ WW
BID : 46108_KA3VSP
Read: GUEST
Subj: re: Hardware for new node
Path: IW8PGT<IZ3LSV<I0OJJ<EA2RCF<LU9DCE<GB7YEW<WA3WLH<W9GM<KA3BVJ<KA3VSP
Sent: 250330/1222Z 46108@KA3VSP.DE.USA.NOAM BPQ6.0.24
Hi Eric. Is the site remote or would you have access?
If remote, I'd recommend Kantronics KPC-3 hardware
TNC's with K-Net and DB-25 RS-232 ports where the
TNC's for each port can be daisy chained. The
hardware TNC's can be accessed remotely over RF for
any changes. K-NET works well as a NetROM compatible.
If you have access, I'd probably recommend a Raspberry
Pi with BPQ and a hardware KISS TNC such as NinoTNC's or
KPC-3's. For soundmodems, I'd recommend UZ7HO, only
because I had problems with Direwolf and it left a bad
experience for me. But, that was years ago and Direwolf
may be an OK solution now.
Best,
Brian, KA3VSP
Read previous mail | Read next mail
| |
