| |
UT1HZM > PACKET 19.09.16 10:34l 25 Lines 642 Bytes #999 (0) @ WW
BID : 41627_UT1HZM
Read: GUEST
Subj: Re: Looking For Source for TNC's?
Path: IW8PGT<CX2SA<N9PMO<VE3UIL<F3KT<F3KT<UT1HZM
Sent: 160919/0906Z 41627@UT1HZM.KREM.POL.UKR.EU BPQ6.0.12
Hi Steve.
ei2gyb:
>I am trying to setup the BBS / APRS on a Raspberry Pi. Im not sure if
>a soundcard would work on that? I know you can get usb sound cards but not
>sure if that would work ...
There are some notes, cheap USB-sound adapters should work:
https://github.com/wb2osz/direwolf/blob/master/doc/Raspberry-Pi-APRS.pdf
https://andrewmemory.wordpress.com/2015/03/22/setting-up-direwolfxastir-on-a-raspberry-pi/
At least it cheap, you can try and compare it performance vs hardware TNC's.
As full node/bbs/aprs software LINBPQ should be OK for all job.
There are active support yahoo-group for BPQ software too.
73, Sergej
Read previous mail | Read next mail
| |
