| |
G4APL > ALL 01.07.15 16:31l 90 Lines 2846 Bytes #999 (0) @ WW
BID : 6255G4APL
Read: GUEST
Subj: GB7CIP HF PACTOR INFO
Path: IW8PGT<IZ3LSV<IK6ZDE<I0OJJ<GB7CIP<GB7CIP<GB7CIP
Sent: 150701/1526Z @:GB7CIP.#32.GBR.EURO $:6255G4APL
T:From: Paul Lewis <g4apl@gb7cip.ampr.org>
T:Newsgroups: ampr.all
T:Message-Id: <mn10g9$khb$1@gb7cip.ampr.org>
Hello and thanks for your interest, here is my systems cureent info,
GB7CIP Lin_XFBB server forward scripts automatically controlling
SCS PTC-iiPro multimode controller
Kenwood TS480-Sat (from November 2005)
Scanning, band and frequency selection
Switching between Homebrew multiple wire dipoles and 3ele HF Beam
Rotator HAM VX/DCU1X and HF beam direction
Tones(4) 1400hz/1600hz USB for P1 P2 and P3 modes
g4apl Paul (gb7cip HF PACTOR) Always looking for new HF AX25 Forwarding
partners.
He also likes having one to one HF PACTOR QSO's please arrange sked, either
via GB7CIP BBS FBB_Convers C (command) or via 14109.0 USB centre frequency
if he notices you have logged on. USB Mark 14109.1 dial 14107.5KHz
PACTOR Forwarding sessions commence hourly at 28 minutes past the hour.
HF Pactor Frequencies being scanned for connections
Mark frequencies listed below are based on 1600hz 1400hz tones.
If you use different tones you will need to minus your
high tone from the USB Mark Frequency listed below to
get the USB dial frequency.
HF Beam Headings in unattended mode - Times in GMT/UTC (approx)
VK/ZL Long Path 06:28-08:27
North America 15:28-06:27
Other Times Towards mainland Europe, Far East and SP Oceania
40M 24 hours 20M 00:00-23:59 UTC 15M 06:00-23:59
##################
MARK QRG USB DIAL QRG USED Mode
7048.00 7046.40 P1,P2
7050.00 7048.40 P1,P2
7051.50 7049.90 P1,P2,P3
14091.60 14090.00 P1,P2
14093.50 14091.90 P1,P2
14094.00 14092.40 P1,P2
14096.00 14094.40 P1,P2
14096.60 14095.00 P1,P2
14097.50 14095.90 P1,P2
14098.00 14096.40 P1,P2
14107.00 14105.40 P1,P2,P3
14107.50 14105.90 P1,P2,P3
14110.50 14108.90 P1,P2,P3
21098.00 21096.40 P1,P2,
21098.80 21097.20 P1,P2,
21096.60 21095.00 P1,P2,
21112.00 21110.40 P1,P2,P3
28306.00 28304.40 P1,P2,P3
28130.00 28128.40 P1,P2
You can test the AX25 Mail path to GB7CIP.#32.GBR.EURO from your
home BBS.
Using the PING route facility.
By sending a message in the following formatto the GB7CIP PING Server.
if you read the ping reply message in verbose mode you will display the
SP route R:Line headers.
SP PING@GB7CIP.#32.GBR.EURO
Subject: ping SP path test
Message: Body nothing require
/EX
Current active AX25 BBS forward partners are
F3KT IK0MIL OK0PBR TA2BBS UT1HZM
N9LYA N0XR
Reviewed 1.7.2015
Hope the above information was useful to you.
73 de Paul g4apl SysOp GB7CIP MB7NCR
--
amprnet g4apl@gb7cip.ampr.org ax25 g4apl@gb7cip.#32.gbr.euro
amprnet http://gb7cip.ampr.org Inet http://www.theskywaves.net
Read previous mail | Read next mail
| |
