| |
UT1HZM > PACKET 24.03.21 22:10l 22 Lines 795 Bytes #999 (0) @ WW
BID : 5254_UT1HZM
Read: GUEST
Subj: Re: Two modems --> One radio = How?
Path: IW8PGT<IZ3LSV<DB0ERF<OK0NAG<F3KT<F3KT<UT1HZM
Sent: 210324/2038Z 5254@UT1HZM.KREM.POL.UKR.EU BPQ6.0.21
Hello Misko and all.
YT7MPB:
> Seems that I managed to do what I had asked above. For the RX side I
> used a kind of a "splitter" adapter (divider, or whatever you name it)
> that inserts itself into the 6.3 mm headphones jack of FT-1000MP and has
> two 3.5 mm outputs, so that way I got two 3.5mm jacks for receiving
> audio by both modem/interfaces.
Maybe a bit later reply.
Not understand why you decide to use mic/sprk connectors?!
Its worst way to operate digital modes - need to check levels every time,
check to off MIC-compressor or mic gain, vox etc...
FT-1000MP rig have a lot of special ACC connectors on back side for our purpose.
Look for PKT or DVS2 jacks, also for "patch jacks" - there are at least three ways
to connect modems to radio by the right way.
73, Sergej.
Read previous mail | Read next mail
| |
