OpenBCM V1.07b12 (Linux)

Packet Radio Mailbox

IW8PGT

[Mendicino(CS)-Italy]

 Login: GUEST





  
KF7PSM > PACKET   04.05.23 16:20l 12 Lines 585 Bytes #999 (0) @ WW
BID : 78979_KE0GB
Read: GUEST
Subj: Adding fx.25 to older tnc's
Path: IW8PGT<I3XTY<IZ3LSV<DB0ERF<OK0NAG<OK0NBR<SR1BSZ<IW0QNL<VE2PKT<W0ARP<
      KE0GB
Sent: 230504/1513Z 78979@KE0GB.#SECO.CO.USA.NOAM LinBPQ6.0.23

I was thinking of a process to add fx.25 to older tnc's kams etc.
What my thoughts are is to intercept the data stream between the
modem and the tnc uart. Capture the outgoing ax.25 packet and
reform it with a small faster processor to fx.25 and send. Rx
the incoming ax/fx.25 packets and if ax.25 pass on through or
if fx.25 is received reform back to ax.25 after error correction
and send to cpu or toss if bad. Lots of old tnc's on the 14.105
hf packet network may benefit possibly with less retries on hf
and also may be good for weak vhf links. Any ideas appreciated.

73 KF7Psm


Read previous mail | Read next mail


 23.12.2024 16:54:59lGo back Go up