| |
VE4KLM > APRS 15.06.21 16:42l 36 Lines 1180 Bytes #999 (0) @ WW
BID : A0JBS_VE4KLM
Read: GUEST
Subj: NOSaprs 'officially' APN2XX on aprs.org now
Path: IW8PGT<I3XTY<I0OJJ<LU4ECL<VE2PKT<K5DAT<AA6HF<VE4KLM
Sent: 210615/1515z @:VE4KLM.#WPG.MB.CAN.NOAM [Winnipeg] $:A0JBS_VE4KLM
Good day,
Yesterday, Bob Bruninga WB4APR was kind enough to add an entry for
the NOSaprs module of JNOS 2.0 to the 'tocall' list he maintains at :
http://aprs.org/aprs11/tocalls.txt
NOSaprs is now 'assigned' APN2XX, with APZ200 noted as being used by
older versions of JNOS. It's been quite some time since NOSaprs module
was introduced, so it's not really experimental anymore is it ...
Thanks to Janusz HF1L (ex.SP1LOP) for suggesting this to me.
It's a simple update to the 'aprs.h' header file :
/* This is the APRS destination call we use for NOSaprs */
#define APRSDC "APZ200"
If you are interested in this, just change the "APZ200" to "APN20H" for
now (to match the NOSaprs version number). I have already updated the
aprs.h header file in the rsync area.
NOTE : If you have a route setup for APZ200 - here's mine for 30 meters :
# 30Dec2020, So that K4KPN-10 will pass it on further !
ax25 route add apz200 rp0 WIDE1-1
then don't forget to change the apz200 to apn20h once you have the
new destination callsign compiled into the software.
YES, if you TX with NOSaprs, you set the APRS path with 'ax25 route' ...
Maiko / VE4KLM
Read previous mail | Read next mail
| |
