OpenBCM V1.07b12 (Linux)

Packet Radio Mailbox

IW8PGT

[Mendicino(CS)-Italy]

 Login: GUEST





  
G4APL  > PACTOR   25.07.14 18:58l 54 Lines 1538 Bytes #999 (0) @ WW
BID : 53349G4APL
Read: GUEST
Subj: Re: GB7CIP Pactor I/F Fails
Path: IW8PGT<IZ3LSV<I0OJJ<GB7CIP<GB7CIP<GB7CIP
Sent: 140725/1736Z @:GB7CIP.#32.GBR.EU $:53349G4APL

T:From: Paul Lewis <g4apl@gb7cip.ampr.org>
T:Newsgroups: ampr.coms.pactor
T:Message-Id: <lqu477$hs4$1@gb7cip.ampr.org>

Hello to  all GB7CIP HF/LF Pactor forwarding partners
www.theskywaves.net/pactor.html

Here is an update.

I have identified the problem. Though not the solution.
my nice  24 AMP DRAE Power supply that provides the power to 
GB7CIP's UHF/VHF tranceivers and the two SCS PTCiipros.

Is switching in to 'current limiit' Reseting the 
volts, thus powering off and on all the attached equipment.

I am currently investigating which connected device is causing
'current limit'

73 de Paul g4apl SysOP GB7CIP

g4apl%gb7cip.#32.gbr.eu@gb7cip.ampr.org wrote:
> From: G4APL@GB7CIP.#32.GBR.EU
> To  : PACTOR@WW
> 
> 15 July 2014
> 
> Hello GB7CIP Pactor partners
> 
> I am currently experiencing problems
> with my Linfbb 7.05F xfbb which started on the
> 15 July 2014.
> 
> When forwarding the xfbb detects
> Freq Busy on all Frequencies.
> 
> If I disable XFBB and using a UbuntU cutecom modem program connect to the
> SCS data controller.  Reset or restart the controller software. I can sslect 
> (change) TX Fequencies,see stations calling and can connect to pactor stations manually.
> 
> It is very HOT here, and I think the issue
> may be due to the extream heat. Or a Software problem.
> 
> Currently under investigation.
> 
> I am not the position to enable the
> back up pactor system at gb7cip at this time
> 
> 73 de Paul G4APL @ GB7CIP (SysOP)
> 
> 

-- 
amprnet g4apl@gb7cip.ampr.org ax25 g4apl@gb7cip.#32.gbr.eu


Read previous mail | Read next mail


 24.12.2024 01:49:34lGo back Go up