| |
G4APL > PACTOR 01.05.16 07:37l 101 Lines 3082 Bytes #999 (0) @ WW
BID : 2943_GB7CIP
Read: GUEST
Subj: GB7CIP HF PACTOR INFO
Path: IW8PGT<IZ3LSV<F1OYP<ON0AR<GB7CIP
Sent: 160501/0626Z @:GB7CIP.#32.GBR.EURO #:2943 [Caterham Surrey GBR] $:2943_GB
From: G4APL@GB7CIP.#32.GBR.EURO
To : PACTOR@WW
GB7CIP HF PACTOR FREQUENCIES
Hello and thanks for your interest in reading this.
The following describes GB7CIP System and frequencies.
GB7CIP Lin_XFBB server forward scripts automatically controlling
SCS PTC-iiPro multimode controller
Kenwood TS480-Sat (First operational November 2005)
Scanning, band and frequency selection
Switching between Homebrew multiple wire dipoles and 3ele HF Beam
Rotator HAM VX/DCU1X and HF beam direction
Tones(4) 1400hz/1600hz USB for P1 P2 and P3 modes
Data Mode Allocation according to the 7MHz band plans
7MHz
7047.00 - 7050 00 500hz Narrow band mode Automatically
Controlled Data Stations unattended
7050.00 - 7053.00 2.7KHz All Mode Automatically
Controlled Data Stations unattended
g4apl Paul (gb7cip HF PACTOR) Always looking for new HF AX25 Forwarding
partners.
He also likes having one to one HF PACTOR QSO's please arrange sked,
either via GB7CIP BBS FBB_Convers C (command) or via 14109.0 USB
centre frequency if he notices you have logged on. He will connect.
PACTOR AX25 LinFBB Forwarding sessions commence hourly at 28 minutes
past the hour.
HF Pactor Frequencies being scanned for connections
Mark frequencies listed below are based on 1600hz 1400hz tones.
If you use different tones you will need to minus your
high tone from the USB Mark Frequency listed below to
get the USB dial frequency.
HF Beam Headings in unattended mode - Times in GMT/UTC (approx)
VK/ZL Long Path 06:28-09:27
North America 15:28-06:27
Other Times Towards mainland Europe, Far East and SP Oceania
40M 24 hours 20M 00:00-23:59 UTC 15M 06:00-23:59
##################
MARK QRG USB DIAL QRG USB Mode
7048.00 7046.40 P1,P2
7050.00 7048.40 P1,P2
7051.50 7049.90 P1,P2,P3
14091.60 14090.00 P1,P2
14093.50 14091.90 P1,P2
14094.00 14092.40 P1,P2
14096.00 14094.40 P1,P2
14096.60 14095.00 P1,P2
14097.50 14095.90 P1,P2
14098.00 14096.40 P1,P2
14107.00 14105.40 P1,P2,P3
14107.50 14105.90 P1,P2,P3
14110.50 14108.90 P1,P2,P3
21098.00 21096.40 P1,P2
21098.80 21097.20 P1,P2
21096.60 21095.00 P1,P2
21112.00 21110.40 P1,P2,P3
28306.00 28304.40 P1,P2,P3
28130.00 28128.40 P1,P2
You can test the AX25 Mail path to GB7CIP.#32.GBR.EURO from your
home BBS. Using the PING route facility. By sending a message
in the following format to the GB7CIP PING Server..
SP PING@GB7CIP.#32.GBR.EURO
Subject: ping
Message: Body nothing require
with a /EX on a new line to end message
Current active AX25 BBS forward partners are
DB0ZAV F3KT IK0MIL OK0PBR TA2BBS UA6ADV UT1HZM
N9LYA N0XR
When propagation behaves itself. I find this always interesting when
paths are open.
Reviewed 1.5.2016
Hope the above information was useful to you.
73 de Paul g4apl SysOp GB7CIP
--
g4apl@gb7cip.#32.gbr.euro Mozilla's Thunderbird Client to access LinFBB
Read previous mail | Read next mail
| |
