| |
KA3BVJ > SWL 21.12.24 14:10l 20 Lines 2330 Bytes #999 (0) @ WW
BID : 64941_KA3BVJ
Read: GUEST
Subj: Shortwave RadioGram
Path: IW8PGT<IZ3LSV<DB0ERF<DK0WUE<DK0WUE<VK5RSV<VK2RZ<W0ARP<KE0GB<W9GM<
KA3BVJ
Sent: 241221/1302Z 64941@KA3BVJ.#EPA.PA.USA.NOAM BPQ1.4.65
Shortwave Radiogram
Program 382
Holiday "Spectacular"
Hello friends,
This week's program (382) will be our Holiday Spectacular. It will feature 18 MFSK64 images, all 150x150 pixels, of commercial light-pole-mounted holiday decorations. We've done light-pole decorations before, but the photos this year are new (I think).
Program 382 will be repeated the following week (27 December-1 January).
Despite the festive content, production of program 382 was a harrowing experience. As I was encoding the content using Fldigi > File > Audio > TX generate, I noticed that the audio did not sound quite right. The pitch seemed high. When attempting to decode from the playback, the RSIDs would result in incorrect modes and audio frequencies. Some of the text did not print out correctly. I tried restarting the PC, with no improvement. Finally, I downloaded and installed the latest version of Fldigi (4.2.03), the the audio during encoding sound normal. Decodes on playback were OK. My previous (old) version of Fldigi (4.1.20) seems to have corrupted itself. I re-produced the show using the new, uncorrupted Fldigi. (I notice that the new Fldigi records at a lower amplitude. I hope this does not adversely affect your decoding.)
On the subject of failures, my Yaesu FT-897D transceiver has stopped operating correctly after 13 years of nearly flawless service. The mode and band switches, which are rather essential, no longer work. Yes, I tried the lock button. I also tried using Flrig via the CAT cable, but it also would not switch the modes. I have yet to try a factory reset, although another owner noted online that this did not fix the problem. What might work, according to that owner, is unplugging the FT-897D for a long time, maybe months, to let the capacitors fully discharge.
And speaking of failures, again, the exploded Florida Power and Light transformer serving the WRMI site is probably replaced by now. Some WRMI frequencies were off the air, including last week's Shortwave Radiogram on 9955 kHz. The schedule should be normal this week.
A video of last week's Shortwave Radiogram (program 381) is provided by Scott in Ontario (Wednesday 1330 UTC). The audio archive is maintained by Mark in the UK. Analysis is provided by Roger in Germany.
Here is the lineup for Shortwave Radiogram, program 38/ex
Read previous mail | Read next mail
| |
