| |
KF5JRV > TECH 07.04.16 12:22l 71 Lines 4995 Bytes #999 (0) @ WW
BID : 1130_KF5JRV
Read: GUEST
Subj: Quantum Logic Clock
Path: IW8PGT<IZ3LSV<IW0QNL<JH4XSY<JM1YTR<JE7YGF<N9PMO<NS2B<N0KFQ<KF5JRV
Sent: 160407/1116Z 1130@KF5JRV.#NWAR.AR.USA.NA BPQ1.4.65
Physicists at the National Institute of Standards and Technology (NIST) have built an enhanced
version of an experimental atomic clock based on a single aluminum atom that is now the world's
most precise clock, more than twice as precise as the previous pacesetter based on a mercury atom.
ion trap
The ion trap where the main action takes place in the NIST aluminum ion clock. The aluminum ion
and partner magnesium ion sit in the slit running down the center of the device between the electrodes.
The new aluminum clock would neither gain nor lose one second in about 3.7 billion years, according to
measurements to be reported in Physical Review Letters.*
The new clock is the second version of NIST's “quantum logic clock,ö so called because it borrows the
logical processing used for atoms storing data in experimental quantum computing, another major
focus of the same NIST research group. The second version of the logic clock offers more than twice
the precision of the original.
In addition to demonstrating that aluminum is now a better timekeeper than mercury, the latest results
confirm that optical clocks are widening their lead—in some respects—over the NIST-F1 cesium
fountain clock, the U.S. civilian time standard, which currently keeps time to within 1 second in
about 100 million years.
Because the international definition of the second (in the International System of Units, or SI) is
based on the cesium atom, cesium remains the “rulerö for official timekeeping, and no clock can
be more accurate than cesium-based standards such as NIST-F1.
The logic clock is based on a single aluminum ion (electrically charged atom) trapped by electric
fields and vibrating at ultraviolet light frequencies, which are 100,000 times higher than microwave
frequencies used in NIST-F1 and other similar time standards around the world. Optical clocks
thus divide time into smaller units, and could someday lead to time standards more than 100
times as accurate as today's microwave standards. Higher frequency is one of a variety of
factors that enables improved precision and accuracy.
Aluminum is one contender for a future time standard to be selected by the international community.
NIST scientists are working on five different types of experimental optical clocks, each based on
different atoms and offering its own advantages. NIST's construction of a second, independent
version of the logic clock proves it can be replicated, making it one of the first optical clocks to
achieve that distinction. Any future time standard will need to be reproduced in many laboratories.
NIST scientists evaluated the new logic clock by probing the aluminum ion with a laser to measure
the exact "resonant" frequency at which the ion jumps to a higher-energy state, carefully accounting
for all possible deviations such as those caused by ion motions. No measurement is perfect, so
the clock's precision is determined based on how closely repeated measurements can approach
the atom's exact resonant frequency. The smaller the deviations from the true value of the
resonant frequency, the higher the precision of the clock.
Physicists also evaluate the performance of new optical clocks by comparing them to older optical
clocks. In this case, NIST scientists compared their two logic clocks by using the resonant laser
frequency from one clock to probe the ion in the other clock. Fifty-six separate comparisons were
made, each lasting between 15 minutes and 3 hours.
The two logic clocks exhibit virtually identical “tickö rates—differences don't show up until
measurements are extended to 17 decimal places. The agreement between the two aluminum
clocks is more than 10 times closer than any previous two-clock comparison, with the lowest
measurement uncertainty ever achieved in such an evaluation, according to the paper.
The enhanced logic clock differs from the original version in several ways. Most importantly, it
uses a different type of “partnerö ion to enable more efficient operations. Aluminum is an exceptionally
stable source of clock ticks but its properties are not easily manipulated or detected with lasers.
In the new clock, a magnesium ion is used to cool the aluminum and to signal its ticks. The original
version of the clock used beryllium, a smaller and lighter ion that is a less efficient match for aluminum.
Clocks have myriad applications. The extreme precision offered by optical clocks is already providing
record measurements of possible changes in the fundamental “constantsö of nature, a line of inquiry
that has important implications for cosmology and tests of the laws of physics, such as Einstein's
theories of special and general relativity. Next-generation clocks might lead to new types of gravity
sensors for exploring underground natural resources and fundamental studies of the Earth. Other
possible applications may include ultra-precise autonomous navigation, such as landing planes by
GPS.
Read previous mail | Read next mail
| |
