| |
G8MNY > TECH 09.07.17 09:24l 74 Lines 3193 Bytes #999 (0) @ WW
BID : 48971_GB7CIP
Read: GUEST
Subj: 23el 1296MHz Ant Repair Spec
Path: IW8PGT<CX2SA<GB7CIP
Sent: 170709/0820Z @:GB7CIP.#32.GBR.EURO #:48971 [Caterham Surrey GBR]
From: G8MNY@GB7CIP.#32.GBR.EURO
To : TECH@WW
(New Jan 99)
(8 Bit ASCII graphics use code page 437 or 850, Terminal Font)
From: M0ATV@GB7DEE.#51.GBR.EU
If like me, your antenna's suffered damage during the recent severe winds then
here is some handy specs for the 23 element 1296 MHz tonna, which I had fall
down, & suffer much damage to the very fragile tiny elements, luckily I had
measured them all before installing the antenna, & was able to make my own
replacements from brass brazing rod.
**** This info is for repair purposes only ****
PLEASE ENSURE ALL YOUR PAGING PROMPTS ARE SWITCHED OFF i.e OP, or
drawing will be unreadable & incorrect.
23 Element Tonna (1296 MHz spec) dimensions for repair purposes only
--------------------------------------------------------------------
Fig 1. Actual Element lenghts in mm
106
³ * 97 94 92 90 90 90 90 90 90 90
ΙΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³Ν»
ΘΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΌ
³ 100 95 92 91 90 90 90 90 90 90 90
( * DENOTES MAIN DRIVEN DIPOLE....SEE BELOW)
----------------------------------------------------------------------------
Fig 2. Distances between elements in mm
R
³ *
ΙΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³Ν»
ΘΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΝ³ΝΌ
³34 25 34 60 65 63 77 86 86 87 87 87 87 87 87 87 87 87 87 90 87 71
R - DENOTES MAIN REAR REFLECTOR
* - DENOTES MAIN DRIVEN DIPOLE
----------------------------------------------------------------------------
Fig 3. Folded Dipole dimensions
ΪΔΔΔΔΔΔΔΔΔΔΔΔ 100 ΔΔΔΔΔΔΔΔΔΔΔΔΔΔΏ
ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ» ΔΏ
Ί Ί ³
Ί MAIN FOLDED DIPOLE Ί 26
Ί Ί ³
ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝ ΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ ΔΩ
³ | |
32 | |
_³____| |______
| |
| MAIN BOOM |
|__________________|
ALL elements stand 41mm high from boom & are offset by non conductive arms.
LAST element is 15mm from end of boom
MAIN rear reflector starts 15mm in from boom
FOLDED DIPOLE is fed direct via 535mm length (multi halfwave) of feeder
FOLDED DIPOLE stands 32mm high from boom
FOLDED DIPOLE total uncoiled length 265mm
------------------------------------------------------------------------
Well, there you have it, hope this has been of some use to other unfortunate
souls who lost valuable elents during the storms, good luck with your repairs.
73 de Tony M0ATV South Liverpool @ GB7DEE
Why don't U send an interesting bul?
73 De John, G8MNY @ GB7CIP
Read previous mail | Read next mail
| |
