OpenBCM V1.07b12 (Linux)

Packet Radio Mailbox

IW8PGT

[Mendicino(CS)-Italy]

 Login: GUEST





  
PD1AS  > TECH     03.10.21 15:36l 30 Lines 1014 Bytes #999 (0) @ WW
BID : 190PD1AS
Read: GUEST
Subj: TTN - TheThingsNetwork - Any ham operator using it too?
Path: IW8PGT<IZ3LSV<IQ2LB<IR2UFV<SK0BO<SM0YOS<VE3CGR<KA1VSC<KC9UHI<W9GM<
      VE2PKT<UA6ADV<LU4ECL<PI8SNK<PI8SNK
Sent: 211003/1618 @:PI8SNK.#FRL.NLD.EURO Sally 7.2.055  $:190PD1AS

Message from: PD1AS@PI8SNK

Hi Everyone,

Since the ham community is about technology and radio I was wondering who of
you is also using TheThingsNetwork for IoT devices?

I'm participating in the network since the start and have a TTN Gateway running
based on a Raspberry Pi and IMST ic880a LoRa board.
This weekend I've update the gateway by replacing the Raspberry Pi (1) with a
Raspberry Pi 3B+.
Now the gateway is able to easily run the TTN v3 Stack which I deployed using
Balena.io

I use the TTN network to receive IoT data from 2 temperature sensors which
measure the surface and bottom water temperature in the water behind my house.
Next to this I have a self made weather station measuring temperature, humidity
and air pressure. (broken at the moment, humidity sensors cannot handle...
humidity ;-).

The gateway is located inside in my addict, covering 2-3 km over the graslands
and way less towards the city. 


73 Alexander.
(Message sent with Sally 7.2.055)

BBS       PD1AS@PI8SNK.#FRL.NLD.EURO



Read previous mail | Read next mail


 23.12.2024 08:41:37lGo back Go up