| |
G8MNY > TECH 06.01.22 11:00l 36 Lines 1156 Bytes #999 (0) @ WW
BID : 57614_GB7CIP
Read: GUEST
Subj: Chimney Pot Sky Hook
Path: IW8PGT<LU4ECL<UA6ADV<OE6XPE<IW2OHX<IW0QNL<ON0AR<GB7CIP
Sent: 220106/0930Z @:GB7CIP.#32.GBR.EURO #:57614 [Caterham Surrey GBR]
From: G8MNY@GB7CIP.#32.GBR.EURO
To : TECH@WW
By G8MNY (Update Mar 21)
(8 Bit ASCII graphics use code page 437 or 850, Terminal Font)
I have used a mild steel bar 6mm x 400mm shaped like a butcher's hook, with an
insulated loop at the bottom & put into a sturdy chimney pot, to support 160m
long wire aerial going over the house.
____ Insulated
/.--,\ loop
±± Wire Ý ±± Þ ___
±± over Ý ±± Þ//~\\ .ú'
±± top Ý ±± \\__//ú'
±± of Ý ±± ~~~~ú aerial wire
±± Pot ±± '.threaded
±± ±± ú in loop
To insulate the loop I put on 150mm of polly tubing, & over that some garden
hose pipe, before bending it in to a loop in a strong vice, & leaving just
enough gap to let the wire in.
To put it in place once the wire was threaded @ 11m up, I "loosely" taped it to
a thin light 5m pole, that went through the loop. Then using a ladder at only
gutter height aimed it at the pot. Once in place worked the pole to free it
from the tape.
See my TECH bul on "Tree Antenna Sky Hooks" & "Casting Lead Throwing Weights"
Why Don't U send an interesting bul?
73 de John G8MNY @ GB7CIP
Read previous mail | Read next mail
| |
