| |
G4APL > TECH 23.01.23 16:40l 39 Lines 1080 Bytes #999 (0) @ WW
BID : 43374G4APL
Read: GUEST
Subj: Re: Yaesu FT-991A: CAT via SCS modems?
Path: IW8PGT<IZ3LSV<I0OJJ<EA2RCF<LU9DCE<VE3CGR<VE3VTY<PE1RRR<GB7CIP<GB7CIP<
GB7CIP
Sent: 230123/1536Z @:GB7CIP.#32.GBR.EURO $:43374G4APL
T:From: Paul Lewis <g4apl@gb7cip.ampr.org>
T:Newsgroups: ampr.rec.tech
T:Message-Id: <tqm9ep$sj1$1@gb7cip.ampr.org>
yt7mpb%yt7mpb.#nsd.srb.eu@gb7cip.ampr.org wrote:
>
> I wonder whether it is possible to control the radio frequency and
> other parameters of FT-991 via SCS DR-7400 pactor controller. In fact,
> FT-991 is not listed among Yaesu radios (in the controller's
> memory/firmware), so I wonder whether someone made it working that way.
>
Looking at the FT-991A Cat Operation Manual
the parameters.
The data Look the same format as in the
Kenwood's TS-480SAT PC Control Commands manual.
When comparing both manuals and control fields
I have only use Kenwood TS-480Sats for remote control.
the next question
Going back to 'Basics'
Can you drive the ft991 entering the commands manually
as a test using
Alpha4
or
NCWINPTC
communication programes
and get remote command response via the controller and radio
73 de Paul g4apl/gb7cip
--
amprnet g4apl@gb7cip.ampr.org ax25 g4apl@gb7cip.#32.gbr.euro
amprnet http://gb7cip.ampr.org Inet https://www.theskywaves.net
Read previous mail | Read next mail
| |
