| |
KF7PSM > TECH 25.10.24 04:17l 16 Lines 701 Bytes #999 (0) @ WW
BID : 95359_KE0GB
Read: GUEST
Subj: Adding wifi/ethernet to TNC
Path: IW8PGT<IZ3LSV<DB0ERF<DK0WUE<DK0WUE<VK5RSV<K1AJD<VE3CGR<GB7YEW<KE0GB
Sent: 241025/0315Z 95359@KE0GB.#SECO.CO.USA.NOAM LinBPQ6.0.24
Has anyone ever added a small micro like the ESP8266 to a tnc
where it connects to the ttl serial signals and allows you to
telnet into your tnc over the network rather than using the
serial port? I was thinking of doing this for a friend that wants
to put a packet tnc in his shack which is located a distance from
his house. He doesn't want to run a node like bpq just wants a
simple tnc for vhf packet but doesn't want to run a full blown
computer in the shack to attach to it and remote control it. I
was thinking of using the esp8266 or similar device with wifi
in it and install it in the tnc so he could telnet to the tnc.
Any thoughts on this? Problems it may cause?
Thanks,
Peter KF7PSM
Read previous mail | Read next mail
| |
