| |
CT2KCK > HAM 17.04.17 23:45l 16 Lines 395 Bytes #999 (0) @ WW
BID : 26031_CT2KCK
Read: GUEST
Subj: How To Build A QRP Dummy Load
Path: IW8PGT<IV3ONZ<IZ3LSV<IW0QNL<JH4XSY<CT2KCK
Sent: 170417/2135Z 26031@CT2KCK.CTLX.PRT.EU BPQ6.0.13
In this video, *Randy Hall K7AGE* builds a simple QRP Dummy Load that is
good for up to 20 watts
It even has test point that you can use a meter to measure the voltage to
calculate the power of your transmitter.
Parts needed:
8x 100 ohm 3 watt metal film resistors
1x 1N5711 diode
1x 0.01 uF capacitor
BNC or SO239 connector
Watch How To Build A QRP Dummy Load
https://youtu.be/O9FLgWoyfsY
Read previous mail | Read next mail
| |
