| |
G4APL > PACKET 08.12.17 13:54l 43 Lines 1244 Bytes #999 (0) @ EU
BID : 31741G4APL
Read: GUEST
Subj: HF 300bd R600bd Packet
Path: IW8PGT<IZ3LSV<F1OYP<ON0AR<GB7CIP<GB7CIP<GB7CIP
Sent: 171208/1146Z @:GB7CIP.#32.GBR.EURO $:31741G4APL
T:From: Paul Lewis <g4apl@gb7cip.ampr.org>
T:Newsgroups: ampr.packet.general
T:Message-Id: <p0dttq$q0c$2@gb7cip.ampr.org>
GB7CIP HF 300bd or R600bd Pkt
Hi all
Paul G4APL has after 11 years got around to configuring the
SCS DSP MULTI-II MODEM module in his orignal PTCIIpro that
he got back in 2005 at the start of his PACTOR BBS Project.
He has now configured GB7CIP LinFBB HFPACKET Interface so
that it can now also run 300baud or Robust Packet 600baud.
(Requires configuration change)
This module uses fixed Tones 2100/2300hz (SCS tone 1 pair)
GB7CIP Currently experimenting, testing R600bd mode on
USB Dial 21115.0kHz Mark 21117.3kHz Centre 21117.2kHz
10watts dipole, BBS Beacons
operation not 24 hours, reports welcome.
Happy to arrange skeds at 300bd or 600bd for testing, when
the band is open..
Note: The SCS PTCiiex has Robust Packet 600bd built in
with version 4 software.
Where as the PTCIIPro requires a module in one of the
two module port interfaces.
Tone 4 = 1400/1600hz Tone 1 = 2100/2300hz
Commands to enable
pt
tone 1
pac
baud r600
Posted to PACKET@EU
73 de Paul G4APL SysOp GB7CIP
--
amprnet g4apl@gb7cip.ampr.org ax25 g4apl@gb7cip.#32.gbr.euro
amprnet http://gb7cip.ampr.org Inet http://www.theskywaves.net
Read previous mail | Read next mail
| |
