OpenBCM V1.07b12 (Linux)

Packet Radio Mailbox

IW8PGT

[Mendicino(CS)-Italy]

 Login: GUEST





  
LU9DCE > ALL      29.07.18 14:14l 66 Lines 1853 Bytes #999 (0) @ WW
BID : 24250_LU9DCE
Read: GUEST
Subj: axip linux ax25ipd.conf
Path: IW8PGT<IZ3LSV<ED1ZAC<GB7CIP<I0OJJ<IK6ZDE<VE2PKT<LU3DVN<LU9DCE
Sent: 180729/1205Z @:LU9DCE.TOR.BA.ARG.SOAM #:24250 [TORTUGUITAS] $:24250_LU9DC

>From lu9dce%lu9dce.tor.ba.arg.soam@i0ojj.ampr.org Sun Jul 29 14:06:45 2018
Received: from i0ojj.ampr.org by i0ojj.ampr.org (JNOS2.0k.3B) with SMTP
	id AA38518 ; Sun, 29 Jul 2018 14:06:45 +0200
Message-Id: <24250_LU9DCE@ik6zde.bbs>
>From: lu9dce@lu9dce.tor.ba.arg.soam
X-JNOS-User-Port: Telnet   (ik6zde @ 44.134.32.240)  -> Sending message

From: LU9DCE@LU9DCE.TOR.BA.ARG.SOAM
To  : ALL@WW


I pass an information about the use of ax25ipd of linux

in the route part if you can add a node that
We are sending a list of netrom
and we do not know the ip

an example of a normal route would be

route LU9DCE-0 lu9dce.dynu.com udp 10093 bd

in case we do not know the ip address we will use
the option "l" in this way

route LU9DCE-0 0.0.0.0 lbd

with ip 0.0.0.0
we must remember that the distinctive always goes -0

Of course, our netrom
do not send a list of nodes to the other colleague
until you hear it first

-------------------------------------------------------

route <destcall> <destaddr> <UDP port> [flags]

 Valid flags are:
  l  - update the address based on incoming packets
  p  - check DNS until it succeeds, and the never again
  b  - allow broadcasts to be transmitted via this route
  d  - this route is the default route

 route N0ONE-0 44.23.1.1 udp 10093 b
 send all traffic for N0ONE to 4.23.1.1 as well as send broadcasts

 route vk2sut-0 44.23.2.2 udp 10093 d
 send all traffic for vk2sut out this route, and any traffic that
 doesn't match any other destination (default route)

 route KE6I-1 0.0.0.0 l
 the route to KE6I-1 will be updated based on IP addresses of incoming packets

 route KE6I-2 ke6i.ampr.org p
 check the DNS for ke6i.ampr.org on startup, if it succeeds, don't check it
 again. If it fails, check until it succeeds, and then don't check again.

-----------------------------------

I hope it is useful

73





Read previous mail | Read next mail


 11.05.2024 08:15:02lGo back Go up