| |
EI2GYB > PACKET 27.11.18 11:57l 82 Lines 4471 Bytes #999 (0) @ WW
BID : 2273_EI2GYB
Read: GUEST
Subj: INTRODUCTION TO PACKET - PART 7
Path: IW8PGT<IR2UBX<IW2OHX<IR1UAW<F1OYP<ON0AR<GB7CIP<EI2GYB
Sent: 181127/0953Z 2273@EI2GYB.DGL.IRL.EURO BPQ6.0.16
INTRODUCTION TO PACKET - PART 7 - by Larry Kenney, WB9LOZ
Messages are directed throughout the worldwide BBS network using a scheme
called HIERARCHICAL ADDRESSING. The format for a hierarchical address is:
addressee-call @ BBS-call.#local-area.state-province.country.continent
For example: My hierarchical packet address is:
WB9LOZ @ W6PW.#NCA.CA.USA.NOAM
It might look complicated, but it's not. First, note that each section of
the format is separated by a period. State and province codes are the
recognized two-character codes established by the US and Canadian Post
Offices. These may be found in the Callbook, your phone directory, or any
zip code listing. Don't guess on the state and province code if you aren't
sure what it is, and make sure you use only the two-letter abbreviation.
You could send the message to the wrong state or province or keep it from
being forwarded altogether.
The codes used for the countries and continents are standards, now accepted
throughout the world. You should be able to find a list of them in the
help document or file section of your BBS. The country code has three
letters and the continent code has four letters. (An older version of the
continent code, still used by some BBSs, has only two letters.)
The code for the local area is optional. Since you probably have no idea
what code is being used in upper New York state or in Iowa City, IA, for
example, you don't have to enter it. If you do know the local code, please
use it, because it will help get the message closer to where it's going
more directly.
For messages going outside of the US or Canada, the state-province section
is not always used.
Using the hierarchical format, here are some examples of packet addresses:
KB6LQV @ N6ZGY.#CCA.CA.USA.NOAM
KC6NVL @ K6VE.#SCA.CA.USA.NOAM
KC3XC @ N4QQ.MD.USA.NOAM
VE3XYZ @ VE3RPT.ON.CAN.NOAM
JA1ABC @ JA1KSO.#42.JPN.ASIA
You'll note that the local area code is preceded by the octothorpe (now,
how's that for a $5 word?), better known as the number or pound sign. The
reason is that in Great Britain, Japan, and possibly other areas, they use
routing numbers for the local area, which could get confused with zip and
postal codes. Using the # on all local area codes will eliminate forwarding
problems.
We need to emphasize two very important points: hierarchical addressing
DOES NOT indicate a forwarding PATH, and ONLY ONE BBS call should be
included in the address. A list of BBS calls separated by periods will not
get your message to its destination. In fact, it can cause your message to
loop between BBSs and your message probably won't be delivered. The
addressing scheme is said to be one area inside another area. Using my
hierarchical address as an example, WB9LOZ @ W6PW.#NCA.CA.USA.NOAM, here's
how you would describe the address: "WB9LOZ at W6PW which is in Northern
California which is in California which is in the USA which is in North
America".
USING THE HIERARCHICAL ADDRESS: This section explains how the BBS soft-
ware uses the hierarchical addressing scheme. For an example, let's say
that I send a message to my friend Richard, KA7FYC, who uses the KD7HD
BBS in Missoula, MT as his home BBS. I would enter:
SP KA7FYC @ KD7HD.#MSL.MT.USA.NOAM
All BBSs have a routing list called a "forward file". Like your local
postal sorter, it "knows" about local routings in detail, but as the desti-
nation grows more distant, it knows only about larger geographical areas.
If the only items in my BBS's forward file are other California BBSs plus
a list of state abbreviations, country and continent codes, let's see how
this message would be forwarded. The BBS software will attempt to find a
match between the items in the BBS forward file and the various parts of
the hierarchical address starting with the left-most item in the address
field. In our case, it would not find a match for KD7HD. If there isn't
a match, it then moves to the next section to the right. It wouldn't find
a match for #MSL, so it would again move to the right. Since all of the
state abbreviations are listed in the forward file, it would find MT and
that match would allow the message to be forwarded. The forward file would
indicate the call of the next BBS in line to receive a message addressed to
MT. Once the message is received at the next BBS, the process would start
all over again until the message is finally delivered to its destination.
- - - -
Read previous mail | Read next mail
| |
