| |
CX2SA > SATDIG 06.11.17 06:00l 721 Lines 21405 Bytes #999 (0) @ WW
BID : AMSATBB12288
Read: GUEST
Subj: AMSAT-BB-digest V12 288
Path: IW8PGT<IZ3LSV<IW0QNL<JH4XSY<JE7YGF<7M3TJZ<CX2SA
Sent: 171106/0352Z @:CX2SA.SAL.URY.SOAM #:25675 [Salto] FBB7.00e $:AMSATBB12288
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. New online satellite logger (vk4tec@xxxxxxxxxxxxx.xxxx
2. Re: DX KEEPER (alex weimer)
3. DXKEEPER LOG (alex weimer)
4. Re: DX KEEPER (alex weimer)
5. D-Star and FM/SSTV CubeSats launch Nov/Dec (M5AKA)
6. Re: 9100 AEA DSP2232 WiSP setup (kb2mjeff@xxx.xxxx
7. Re: FT-991/SatPC32 CAT Support (Norm n3ykf)
8. Falsonsat-3 overload (vk4tec@xxxxxxxxxxxxx.xxxx
9. awards (wa4hfn@xxxxxxx.xxxx
10. Re: SSTV Commemoration of the 20th Anniversary of ARISS.
(Armand SP3QFE)
11. SSTV on XW-2D (Frank G)
12. Re: SSTV on XW-2D (Paul Stoetzer)
13. Falconsat-3 APRS (Tony)
14. G-5500 Set up cal? (Darrell W4CX)
----------------------------------------------------------------------
Message: 1
Date: Sun, 5 Nov 2017 04:54:40 +1000
From: <vk4tec@xxxxxxxxxxxxx.xxx>
To: "AMSAT" <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] New online satellite logger
Message-ID: <001d01d3559e$60c31df0$224959d0$@xxxxxxxxxxxxx.xxx>
Content-Type: text/plain; charset="us-ascii"
Hello
Satlogger is taking shape
Please let me know if you want any more fields
Andy VK4TEC
http://59.167.159.165/satlogger/
------------------------------
Message: 2
Date: Sun, 5 Nov 2017 08:45:04 -0500 (EST)
From: alex weimer <ingejack@xxx.xxx>
To: Paul Stoetzer <n8hm@xxxx.xxx>, Mike Sprenger
<mikesprenger@xxxxx.xxx>
Cc: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] DX KEEPER
Message-ID: <447106723.662.1509889504036@xxxxxxx.xxx.xxx>
Content-Type: text/plain; charset=UTF-8
Thanks Mike: It's a learning curve but looks like a Keeper 73 JACK KC7MG
By the way where is the satellite list ??
> On November 4, 2017 at 8:31 PM Mike Sprenger <mikesprenger@xxxxx.xxx> wrote:
>
>
> If you choose a satellite from the sat list i.e. Fo29 it will change
propagation to satellite.
>
> Be sure you have your TX and RX bands correct or you won't get an lotw
match.
>
>
>
> Thanks,
> Mike
>
> Sent from my iPhone
>
> > On Nov 4, 2017, at 12:57 PM, Paul Stoetzer <n8hm@xxxx.xxx> wrote:
> >
> > There?s a propagation panel that gives satellite options.
> >
> > 73,
> >
> > Paul, N8HM
> >
> >
> >> On Sat, Nov 4, 2017 at 12:22 alex weimer <ingejack@xxx.xxx> wrote:
> >>
> >> Paul: In dx keeper software, how do you show the qso as satellite ??
> >> There is no entry in the pull down box as Satellite Thanks Jack kc7mg
> >> _______________________________________________
> >> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> >> to all interested persons worldwide without requiring membership.
Opinions
> >> expressed
> >> are solely those of the author, and do not reflect the official views of
> >> AMSAT-NA.
> >> Not an AMSAT-NA member? Join now to support the amateur satellite
program!
> >> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >>
> > _______________________________________________
> > Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
Opinions expressed
> > are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite program!
> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 3
Date: Sun, 5 Nov 2017 09:01:22 -0500 (EST)
From: alex weimer <ingejack@xxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] DXKEEPER LOG
Message-ID: <622739065.499.1509890482842@xxxxxxx.xxx.xxx>
Content-Type: text/plain; charset=UTF-8
Mike: thanks for the info on the satellite box and correct up/down
frequencies. I made 4 entries and have already receive confirmations back.
Great Log !! Thanks 73 JACK-KC7MG
------------------------------
Message: 4
Date: Sun, 5 Nov 2017 09:02:47 -0500 (EST)
From: alex weimer <ingejack@xxx.xxx>
To: Paul Stoetzer <n8hm@xxxx.xxx>, Mike Sprenger
<mikesprenger@xxxxx.xxx>
Cc: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] DX KEEPER
Message-ID: <1015762200.515.1509890567673@xxxxxxx.xxx.xxx>
Content-Type: text/plain; charset=UTF-8
Thanks Mike. I made 4 entries and have received 4 confirmations back so the
log is working. Just a matter of getting used to it now 73 JACK-KC7MG
> On November 4, 2017 at 8:31 PM Mike Sprenger <mikesprenger@xxxxx.xxx> wrote:
>
>
> If you choose a satellite from the sat list i.e. Fo29 it will change
propagation to satellite.
>
> Be sure you have your TX and RX bands correct or you won't get an lotw
match.
>
>
>
> Thanks,
> Mike
>
> Sent from my iPhone
>
> > On Nov 4, 2017, at 12:57 PM, Paul Stoetzer <n8hm@xxxx.xxx> wrote:
> >
> > There?s a propagation panel that gives satellite options.
> >
> > 73,
> >
> > Paul, N8HM
> >
> >
> >> On Sat, Nov 4, 2017 at 12:22 alex weimer <ingejack@xxx.xxx> wrote:
> >>
> >> Paul: In dx keeper software, how do you show the qso as satellite ??
> >> There is no entry in the pull down box as Satellite Thanks Jack kc7mg
> >> _______________________________________________
> >> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> >> to all interested persons worldwide without requiring membership.
Opinions
> >> expressed
> >> are solely those of the author, and do not reflect the official views of
> >> AMSAT-NA.
> >> Not an AMSAT-NA member? Join now to support the amateur satellite
program!
> >> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >>
> > _______________________________________________
> > Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
Opinions expressed
> > are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite program!
> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 5
Date: Sun, 5 Nov 2017 14:24:01 +0000 (UTC)
From: M5AKA <m5aka@xxxxx.xx.xx>
To: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] D-Star and FM/SSTV CubeSats launch Nov/Dec
Message-ID: <2075651006.4368909.1509891841495@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
November 28 launch for D-Star One CubeSat which will host four D-Star
communication modules, two of them will be fully dedicated to amateur radio
http://www.d-star.one/
December 20 launch for HA-1 CubeSat with FM transponder and SSTV
Developed by Teenagers Amateur Radio Center of Activity in Huai'an
http://www.amsatuk.me.uk/iaru/finished_detail.php?serialnum=589
IARU Region 1 announce new edition (8.00) of the VHF Handbook now available
for free download
http://www.iaru-r1.org/index.php/vhfuhsshf/1737-vhf-manager-handbook-version-8
-00
Page 12 of the November issue of SatMagazine features an article on the
Jordanian JY1-SAT CubeSat which will carry an Amateur Radio linear
transponder. Download the magazine PDF from
http://www.satmagazine.com/
Jordan?s first satellite ? JY1-SAT
https://amsat-uk.org/2017/10/24/jordans-first-satellite-jy1-sat/
Trevor M5AKA
----
AMSAT-UK?http://amsat-uk.org/
Twitter?https://twitter.com/AmsatUK
Facebook https://facebook.com/AmsatUK
YouTube?https://youtube.com/AmsatUK
----
------------------------------
Message: 6
Date: Sun, 5 Nov 2017 09:49:43 -0500
From: <kb2mjeff@xxx.xxx>
To: "Andrew Glasbrenner" <glasbrenner@xxxxxxxxxx.xxx>
Cc: Amsat <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] 9100 AEA DSP2232 WiSP setup
Message-ID: <2B9159856AD24223894CDA30F8D8257E@xxxxxxx>
Content-Type: text/plain; format=flowed; charset="UTF-8";
reply-type=original
I'm a little confused trying to get the setup working with the 9100. I can
key the 2232 into PTT, but not the 9100. I'm using a cable that I built 15
years ago to work with my 847 and 910. looking at the 9100 manual it sez I
can use the ACC port OR the DATA2 port. I'm thinking now with the 9100 I
might have to use the ACC connection on the 9100? Is anybody successfully
working 1200 or 9600 packet with a TNC and the 9100, with either the DATA2
or ACC port?
73 Jeff kb2m
I'm using a 9100 with a PacComm Sprint-2. The cable setup is different than
the 910...it's one jack on the rig rather than two.
73, Drew KO4MA
> On Nov 3, 2017, at 8:07 PM, <kb2mjeff@xxx.xxx> <kb2mjeff@xxx.xxx> wrote:
>
> I had some time today to start working on my Pacsat station. Is anyone
> else trying to setup a 9100, WiSP, DSP2232, and SatPC32 ? I got the setup
> to rx 1200 baud APRS packets, but can?t rx 9600 baud from Falconsat-3. I?m
> using an old cable I used to use with a 910, and an FT-847. I have 9600
> baud turned on. Anyone else get this to work?
>
> 73 Jeff kb2m
---
This email has been checked for viruses by AVG.
http://www.avg.com
------------------------------
Message: 7
Date: Sun, 5 Nov 2017 01:53:32 -0400
From: Norm n3ykf <normanlizeth@xxxxx.xxx>
To: Kevin Rich <kevin.rich@xxxxx.xxx>
Cc: "<,amsat-bb@xxxxx.xxxxxxxx <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] FT-991/SatPC32 CAT Support
Message-ID:
<CAJUhCTNwwgR1-T6xpgrNmZR=e1_pjYMuk9v-kr1GHFP390c-2Q@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
Kevin,
Have you tried to set it (the FT-991) as any other (I'd try all of
them, fiddling with the other settings as well!) Yaesu radio in
satpc32? Some manufacturers have common subsets of commands.
I'm assuming that HDSDR is running on a pc and that it is emulating a
TS-2000 (satpc32 set up the same way)?
The SDR's usually need some filtering on the front end to keep local
RFI and transmitter harmonics at bay. Easy enough to find. A little
work to get it tuned, though.
One of my rotators is a G-5400 on a tripod with casters. Rolled it
into and out of the garage. Great for testing antennas and the like.
Have fun,
Norm n3ykf
On Sat, Nov 4, 2017 at 2:13 PM, Kevin Rich <kevin.rich@xxxxx.xxx> wrote:
> I have been a Ham for 30+ years and just now getting started with the
> satellites. I have made about a dozen contacts using SatPC32 and the ICOM
> IC-9100 with just a PAR Electronics OA-144 Omniangle for the VHF downlink
> and Diamond NR770HB for UHF uplink. Both are just sitting on the back
> porch. These are obviously not the best antennas for satellite work but I
> live in an HOA controlled community and don't have much other option so I
> plan to operate portable when I can.
>
> That leads to my question. I have SatPC32 with the SDRPlay RSP2 and HDSDR
> configured as a downlink and am hoping to be able to use my FT-991 (not A)
> as the uplink but I am unable to find a way to get it to work with the
> software. Is it possible to get it working or does anyone have ideas of
> other options that might work? I'll be operating portable with the Arrow
> satellite antenna.
>
> Having a great time and looking forward to working some of you on the birds.
>
> 73,
>
> -Kevin
> K3GYK / DM79nx
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 8
Date: Mon, 6 Nov 2017 02:47:59 +1000
From: <vk4tec@xxxxxxxxxxxxx.xxx>
To: "AMSAT" <amsat-bb@xxxxx.xxx>
Cc: 'Australian APRS Users' <ozaprs@xxxx.xxx.xx>
Subject: [amsat-bb] Falsonsat-3 overload
Message-ID: <005b01d35655$d8fa7d60$8aef7820$@xxxxxxxxxxxxx.xxx>
Content-Type: text/plain; charset="us-ascii"
In an attempt to increase the signal strength I added a LNA in front of my
AirSpy Mini
Whet I noticed was that the decodes went down
I tried some local signals
I noticed the signals were distorted.
So my advise is get antenna gain and high
Place the Software Defined Radio at the antenna
Be careful not to overload
Arrow and rotator coming
Andrew
------------------------------
Message: 9
Date: Sun, 5 Nov 2017 15:39:26 +0000 (UTC)
From: wa4hfn@xxxxxxx.xxx
To: AMSAT <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] awards
Message-ID:
<1771315158.49111149.1509896366407.JavaMail.zimbra@xxxxxxx.xxx>
Content-Type: text/plain; charset=utf-8
We have a tripple winner
Congrats to Al XE2AT for the following Squirt the Birds awards
Grid Master #6
5 in EM55 #61
Got Grids? #18
These awards are free and we at Squirt the Birts support Amsat NA
www.squirtthebirds.com for info
73 WA4HFN Damon em55
------------------------------
Message: 10
Date: Sun, 05 Nov 2017 22:38:19 +0100
From: Armand SP3QFE <kontakt@xxxxxx.xxx>
To: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] SSTV Commemoration of the 20th Anniversary of
ARISS.
Message-ID: <8e6332eeb5c75a0c35e5b33974c47785@xxxxxx.xxx>
Content-Type: text/plain; charset=UTF-8; format=flowed
Hello Everyone,
Thank you for your information, about my mistake.
After discussions with partners, it is my pleasure to inform you that
the application
window is closes on 30th Dec., 2017 (23:59 UTC).
I'm so sorry for my mistake and enjoy.
73, Armand SP3QFE.
On 2017-09-30 02:00, Greg D wrote:
> Thanks for the reminder, but I thought we had until 30 DECEMBER to do
> this? At least, that's what your earlier email said...
>
> Greg KO6TH
>
> Armand SP3QFE wrote:
>
>> Hello Everyone,
>>
>> The deadline is approaching. There is about one day left. Thank you
>> for your participation in this event. We hope you will enjoy with
>> your award and ARISS activities will always in your mind. Remember
>> please that we can play with HAM radio over the ISS, but before
>> that... a couples years ago, a bunch of people from ARISS and not
>> only worked to put it on the orbit.
>>
>> 73, Armand SP3QFE
>>
>> Awarded. ??????? ????????:
>>
>> 2M0WDG;
>>
>> 4X1AJ;
>>
>> 9H1GW; 9W2BXN; 9W2DYA; 9W2LRN; 9W2VMW; 9W2VRD; 9W6ZUL; 9W8ZZK;
>>
>> AI6V; AJ3DI; Alexis SWL;
>>
>> BX1AD;
>>
>> CD2AGH; CD3NDC; CE2EK; CE3GDR; CE3QC; CU2ZG;
>>
>> Damien SWL;
>>
>> E20ZFD; E21LYW; E22JME; E24DGV; E24KHS; E24MEH; E24NQN; E24PQG;
>> E24SBC; EA3IBC; EA7ADI; EA8ARI; EB2AOC;
>>
>> F-17468; F4AHN; F4BPP; F4EAN; F4EZO; F4GNN; F4GVE; F4HTN; F4HXH;
>> F5NIH; F5RRO;
>>
>> Gilles SWL;
>>
>> HC1YC; HC3RJ; HC5VF; HC6IM; HK3001SWL; HK4GOO; HK4LPA ; HS0EHF;
>> HS1JAN; HS2CBP; HS2QJJ; HS2UPR; HS3LSE; HS3QGB; HS5ZBR; HS6MYW;
>> HS7WMU; HS7XPE; HSYFH;
>>
>> IK3ASM; IT9ELT; IV3GQK;
>>
>> JA0CAW; Jakub SWL; JR2AAAN/2;
>>
>> K4TJL; K7WDO; KB6LTY; KB7QAG; KC7KIU; KD9ETQ; KE0BTX; KF5SMH;
>> KK4YEL;
>>
>> LU1ECO; LU1EPC; LU1HVK; LU1KCQ; LU1QR; LU1XT; LU2DPW; LU2EE; LU2FCY;
>> LU2FGL ; LU3EH; LU4FTA ; LU4VSD; LU5HA; LU5UFM; LU6FAF; LU6FSD ;
>> LU7MT; LU8EY; LU9DDJ; LU9DHJ; LU9FSN; LU9XT; LW1DIW; LW2DYB; LW2EE;
>> LW5EE; LW7EDH; LW8EXS; LW9DFM;
>>
>> M0GIW; M0JFP; MX0MXO;
>>
>> N0STY; N1MDJ; N3UPY; N5KAR; N8EUL; Nicolas SWL;
>>
>> OK2UUJ;
>>
>> PE4KH; PQ2HX; PS7EK; PS8ET; PT9BM; PU2NGB; PU2WSQ; PU4AML; PU6OPW;
>> PU7ORD;
>>
>> PU8MRS; PU8RFL; PW8PM ; PY2TWI; PY4ZBZ;
>>
>> R3KDT; R3KEE; R9LR; RA0ATB; RA1WU; RK9UM; RN6MA;
>>
>> SP3AYA; SP3DBM; SP3QFE; SP5ULN; SP8CGR; SP8OOB; SP9VEY; SQ3OOK;
>> SQ5GLU; SQ5TDW; SQ7SAY; SQ8W; SQ9ZAY; SV3CIX;
>>
>> UA9UIZ;
>>
>> VK2FJET; VK6FH; VU3TYG; VU3YFD;
>>
>> WD4OTR; WD9EWK;
>>
>> XE2MZS; XE3N; XE3WM;
>>
>> YB8M; YB8M; YB8XM; YC9DCK ; YD3HNL; YF3CYT; YG3EKK;
>>
>> On 2017-09-17 23:53, Armand SP3QFE wrote:
>> On 2017-09-11 09:20, Armand SP3QFE wrote:
>> Hello Everyone,
>>
>> Between 20 and 24 July, 2017 a Slow Scan Television (SSTV) event has
>>
>> been performed from the ISS. It was series #7 of 12 images, with
>> wonderful pictures taken over the last 20 years, covering the
>> history of Amateur Radio on the International Space Station (ARISS).
>>
>>
>> The Polish Amateur Radio Union (PZK), in cooperation with ARISS and
>> S.P. Korolev Rocket and Space Corporation ENERGIA, offer an
>> electronic Award to Amateurs who received and decoded at least one
>> SSTV series 7 image. This is a contribution to the commemoration of
>> the 20th Anniversary of ARISS.
>>
>> Applying for the Award are is done at http://ariss.pzk.org.pl/sstv/
>> via an application form. Details are provided in English and in
>> Russian. The application window closes on 30th Dec., 2017 (23:59
>> UTC).
>>
>> You can apply for a commemoration award by uploading at least one
>> image to http://www.spaceflightsoftware.com/ARISS_SSTV/index.php
>> and
>> filling in application form.
>>
>> PS. To avoid duplicates, applicants who already submitted an image
>> of
>> seriess 7, don't need to re-submit IMAGE(S). Filling in the
>> application form is required.
>>
>> 73, Armand SP3QFE
>>
>> FYI:
>>
>> Awarded. ??????? ???????? (Awards has been sent by
>> email):
>>
>> 4X1AJ, 9W2BXN, 9W2VRD, 9W6ZUL, AI6V, AJ3DI, Alexis, BX1AD, CD2AGH,
>> CD3NDC, CE2EK, CU2ZG, Damien D., E20ZFD, E22JME, E24DGV, E24NQN,
>> E24PQG, EA7ADI, EA8ARI, EB2AOC, F4AHN, F4EZO, F4GNN, F4GVE, Gilles
>> M.,
>> HC1YC, HC5VF, HC6IM, HS2QJJ, HS3LSE, HS7XPE, JA0CAW, K4TJL, KB6LTY,
>> KB7QAG, KC7KIU, KD9ETQ, KE0BTX, LU1EPC, LU1HVK, LU1KCQ, LU1XT,
>> LU2DPW,
>> LU2FCY, LU2FGL , LU5HA, LU5UFM, LU6FSD , LU7MT, LU9DHJ, LW1DIW,
>> LW2DYB, LW2EE, M0GIW, M0JFP, MX0MXO, N0STY, N8EUL, Nicolas F.,
>> OK2UUJ,
>> PE4KH, PQ2HX, PU2WSQ, PU4AML, R3KEE, R9LR, RA0ATB, RA1WU, RK9UM,
>> SP3AYA, SP3DBM, SP3QFE, SP5ULN, SP8CGR, SP8OOB, SP9VEY, SQ3OOK,
>> SQ5TDW, SQ9ZAY, UA9UIZ, VK2FJET, WD4OTR, WD9EWK, XE2MZS.
>>
>> The application window closes on 30th Dec., 2017 (23:59 UTC).
>>
>> Congrats! 73, Armand SP3QFE.
------------------------------
Message: 11
Date: Sun, 5 Nov 2017 17:40:34 -0500
From: Frank G <wa2ndv@xxxxx.xxx>
To: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] SSTV on XW-2D
Message-ID: <59ff9362.7317c80a.87830.c332@xx.xxxxxx.xxx>
Content-Type: text/plain; charset="utf-8"
Listened to the 2200Z pass over NY and heard what I thought was SSTV
throughout the entire pass right in the middle of the transponder passband.
I could not decode with either DM-780 or MMSSTV.
Can anyone confirm what this could have been ?
Thanks
Frank
WA2NDV
------------------------------
Message: 12
Date: Sun, 5 Nov 2017 17:43:46 -0500
From: Paul Stoetzer <n8hm@xxxx.xxx>
To: Frank G <wa2ndv@xxxxx.xxx>
Cc: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] SSTV on XW-2D
Message-ID:
<CABzOSOrik2Jj62UN1jDm+5CnFN8PFxDGZe7AHqMv0wqqw9frmA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
Frank,
This is noise that is internal to the satellite. I believe it is some
kind of image of the telemetry beacon that shows up in the
transponder's passband.
On some of the other XW-2s, you can also hear similar images at times
if you're in a quiet enough location to hear the transponder noise
floor, but its very prominent on XW-2D.
73,
Paul, N8HM
On Sun, Nov 5, 2017 at 5:40 PM, Frank G <wa2ndv@xxxxx.xxx> wrote:
>
> Listened to the 2200Z pass over NY and heard what I thought was SSTV
throughout the entire pass right in the middle of the transponder passband.
>
> I could not decode with either DM-780 or MMSSTV.
>
> Can anyone confirm what this could have been ?
>
> Thanks
> Frank
> WA2NDV
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 13
Date: Sun, 5 Nov 2017 18:53:48 -0500
From: Tony <dxdx@xxxxxxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Falconsat-3 APRS
Message-ID: <ba6af1d1-a4f9-2ef2-4be4-03cdb7b78e4f@xxxxxxxxx.xxx>
Content-Type: text/plain; charset=utf-8; format=flowed
All:
Paul, N1PEB, managed to work Falconsat via APRS mobile this evening --
little else in the way of APRS. I'll be monitoring the next pass.
Tony -K2MO
------------------------------
Message: 14
Date: Sun, 5 Nov 2017 19:18:41 -0500
From: "Darrell W4CX" <w4cx@xxxxxxxxx.xxx>
To: <AMSAT-BB@xxxxx.xxx>
Subject: [amsat-bb] G-5500 Set up cal?
Message-ID: <031b01d35694$ce5d5cd0$6b181670$@xxx>
Content-Type: text/plain; charset="us-ascii"
In doing some Full-Scale adjustments to my G-5500 Rotor, I accidentally
fiddled with the Output Voltage Adjustments by mistake. Now everything is
fubar because I wasn't careful enough. Is there a guide somewhere to help
me get the Out Voltage setting back correctly? The Full Scale adjustments
are well documented in the manual. (BTW, I am using the LVB box, but have
it disconnected now). Thanks.
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@xxxxx.xxx.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 12, Issue 288
*****************************************
Read previous mail | Read next mail
| |
