| |
CX2SA > SATDIG 18.11.17 22:14l 720 Lines 22488 Bytes #999 (0) @ WW
BID : AMSATBB12300
Read: GUEST
Subj: AMSAT-BB-digest V12 300
Path: IW8PGT<CX2SA
Sent: 171118/2007Z @:CX2SA.SAL.URY.SOAM #:26918 [Salto] FBB7.00e $:AMSATBB12300
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Re: Fox 1B/RadFxSat launched successfully (Edson W. R. Pereira)
2. AMSAT Fox 1B heard over Australia (andrew@xxxxxxxxxxxxx.xxxx
3. Re: Fox 1B/RadFxSat launched successfully (Nico Janssen)
4. Re: Fox 1B/RadFxSat launched successfully (Ray Hoad)
5. Re: Fox 1B/RadFxSat launched successfully (Scott)
6. Re: First Postlaunch Keps (Mike McCann)
7. Re: recordings of RadFXSat . Project finding Verronica - ex
Douglas KA2UPW/5 (Albert van Deursen)
8. Fox-1B just heard in Chicagoland! (George Henry)
9. RadFxSat (PY5LF)
10. AO-91 Keps (Paul Stoetzer)
11. RadFxSat (Red Willoughby)
12. Re: First Postlaunch Keps (Nitin Muttin)
13. AO-91 Passes & record (Pedro Converso)
14. Fwd: [keps] Changes to AMSAT-NA TLE Distribution for 11-18-17
(Paul Stoetzer)
----------------------------------------------------------------------
Message: 1
Date: Sat, 18 Nov 2017 14:11:19 -0200
From: "Edson W. R. Pereira" <ewpereira@xxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] Fox 1B/RadFxSat launched successfully
Message-ID:
<CALNQy48hoFuWxbwdiiCZ_1qcOtUv9_Y8V_XcuP2mGRmELNdLVg@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
Received one TLM frame over southern Brazil around 15:34 UTC. Unfortunately
I forgot to set enable "Upload to Server" on FoxTlm.
This is the contents for the fox2rtmeasurements and Fox2rttelemetry_0_12480
files.
20171118153421,2,0,12480,-1,4.660957615276412,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0
20171118153421,2,0,12480,1,2316,3497,3443,1903,1893,1901,1802,1809,2709,2765,3
116,2859,3195,2774,1844,1816,0024,1880,1819,1824,2006,0063,0095,1644,1648,0831
,0673,1551,2521,2155,0000,0521,196609,0000,0001,0001,0000,0000,0000,0000,0000,
0001,0001
73, Edson PY2SDR
On Sat, Nov 18, 2017 at 1:45 PM, Ray Hoad <ray.hoad@xxxxxxxx.xxx> wrote:
> I concur. Use pre-launch TLE for now.
>
> Awaiting corrected POST-launch TLEs.
>
> Ray Hoad
> WA5QGD
> Orbital Elements Manager
>
> -----Original Message-----
> From: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of Nico
> Janssen
> Sent: Saturday, November 18, 2017 06:40
> To: the2belo@xxx.xxxxxxx.xx.xxx amsat-bb@xxxxx.xxx
> Subject: Re: [amsat-bb] Fox 1B/RadFxSat launched successfully
>
> Ignore my remark on the 20 minute offset. I was checking against
> a wrong TLE set. The pre-launch TLE set should still be used until
> really measured TLE sets will be published later today.
>
> 73,
> Nico PA0DLO
>
> On 18-11-17 12:46, Jeff A. Boyd wrote:
> > On Sat, 18 Nov 2017 12:24:33 +0100, Nico Janssen <hamsat@xxxxxx.xx>
> wrote:
> >
> >> The pre-lauch TLE set appears to be almost 20 minutes late.
> > When should we expect an updated set? After it starts transmitting?
> >
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 2
Date: Sun, 19 Nov 2017 01:02:34 +1000
From: <andrew@xxxxxxxxxxxxx.xxx>
To: "AMSAT" <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] AMSAT Fox 1B heard over Australia
Message-ID: <010b01d3607e$45933f20$d0b9bd60$@xxxxxxxxxxxxx.xxx>
Content-Type: text/plain; charset="us-ascii"
Fox 1B heard over Australia
AirSpy Mini. Arrow Antenna 20 dB PreAmp
18/11/2017 15:02 UTC
Andrew VK4TEC
------------------------------
Message: 3
Date: Sat, 18 Nov 2017 17:00:37 +0100
From: Nico Janssen <hamsat@xxxxxx.xx>
To: Ray Hoad <ray.hoad@xxxxxxxx.xxx>, the2belo@xxx.xxxxxxx.xx.xxx
amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] Fox 1B/RadFxSat launched successfully
Message-ID: <f236e360-b7dc-afa4-fc06-63b4bc503576@xxxxxx.xx>
Content-Type: text/plain; charset=utf-8; format=flowed
The first four post-launch TLE sets have been published by Space-Track.
They are for objects 43013 through 43016. They seem to be for four of
the five cubesats in this launch. They are only seconds apart. Of course
it is not clear yet if the TLE set for Fox 1B is one of these sets and
if so,
which one it is.
73,
Nico PA0DLO
On 18-11-17 16:45, Ray Hoad wrote:
> I concur. Use pre-launch TLE for now.
>
> Awaiting corrected POST-launch TLEs.
>
> Ray Hoad
> WA5QGD
> Orbital Elements Manager
>
> -----Original Message-----
> From: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of Nico Janssen
> Sent: Saturday, November 18, 2017 06:40
> To: the2belo@xxx.xxxxxxx.xx.xxx amsat-bb@xxxxx.xxx
> Subject: Re: [amsat-bb] Fox 1B/RadFxSat launched successfully
>
> Ignore my remark on the 20 minute offset. I was checking against
> a wrong TLE set. The pre-launch TLE set should still be used until
> really measured TLE sets will be published later today.
>
> 73,
> Nico PA0DLO
>
> On 18-11-17 12:46, Jeff A. Boyd wrote:
>> On Sat, 18 Nov 2017 12:24:33 +0100, Nico Janssen <hamsat@xxxxxx.xx> wrote:
>>
>>> The pre-lauch TLE set appears to be almost 20 minutes late.
>> When should we expect an updated set? After it starts transmitting?
>>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
>
------------------------------
Message: 4
Date: Sat, 18 Nov 2017 10:39:05 -0600
From: "Ray Hoad" <ray.hoad@xxxxxxxx.xxx>
To: "'Nico Janssen'" <hamsat@xxxxxx.xx>, <the2belo@xxx.xxxxxxx.xx.xx>,
<amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Fox 1B/RadFxSat launched successfully
Message-ID: <000b01d3608b$c0297760$407c6620$@xxxxxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
Note that RadFxSat has now been designated AO-91 by AMSAT-NA.
(See announcement by Bill Tynan, W3XO on www.amsat.org)
Ray Hoad
WA5QGD
Orbital Elements Manager
-----Original Message-----
From: Nico Janssen [mailto:hamsat@xxxxxx.xxx
Sent: Saturday, November 18, 2017 10:01
To: Ray Hoad <ray.hoad@xxxxxxxx.xxx>; the2belo@xxx.xxxxxxx.xx.xxx
amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] Fox 1B/RadFxSat launched successfully
The first four post-launch TLE sets have been published by Space-Track.
They are for objects 43013 through 43016. They seem to be for four of
the five cubesats in this launch. They are only seconds apart. Of course
it is not clear yet if the TLE set for Fox 1B is one of these sets and
if so,
which one it is.
73,
Nico PA0DLO
On 18-11-17 16:45, Ray Hoad wrote:
> I concur. Use pre-launch TLE for now.
>
> Awaiting corrected POST-launch TLEs.
>
> Ray Hoad
> WA5QGD
> Orbital Elements Manager
>
> -----Original Message-----
> From: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of Nico Janssen
> Sent: Saturday, November 18, 2017 06:40
> To: the2belo@xxx.xxxxxxx.xx.xxx amsat-bb@xxxxx.xxx
> Subject: Re: [amsat-bb] Fox 1B/RadFxSat launched successfully
>
> Ignore my remark on the 20 minute offset. I was checking against
> a wrong TLE set. The pre-launch TLE set should still be used until
> really measured TLE sets will be published later today.
>
> 73,
> Nico PA0DLO
>
> On 18-11-17 12:46, Jeff A. Boyd wrote:
>> On Sat, 18 Nov 2017 12:24:33 +0100, Nico Janssen <hamsat@xxxxxx.xx> wrote:
>>
>>> The pre-lauch TLE set appears to be almost 20 minutes late.
>> When should we expect an updated set? After it starts transmitting?
>>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
>
------------------------------
Message: 5
Date: Sat, 18 Nov 2017 11:42:31 -0500
From: Scott <scott23192@xxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] Fox 1B/RadFxSat launched successfully
Message-ID:
<CAJCSnObNxitSM-4KEGVCn08DODARhjs-=6rs1VZ-K4O_LUaTwA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
Signal clearly visible at single-digit elevations from Virginia, USA.
Tried but unfortunately could not decode even on replay, but the "Eye
Diagram" in FoxTelem sure does try to form a nice circle!
Here is a screen print of the signal:
https://twitter.com/scott23192/status/931919767597969409
-Scott, K4KDR
==============================
On Sat, Nov 18, 2017 at 11:11 AM, Edson W. R. Pereira <ewpereira@xxxxx.xxx>
wrote:
> Received one TLM frame over southern Brazil around 15:34 UTC. Unfortunately
> I forgot to set enable "Upload to Server" on FoxTlm.
>
> This is the contents for the fox2rtmeasurements and Fox2rttelemetry_0_12480
> files.
>
> 20171118153421,2,0,12480,-1,4.660957615276412,0.0,0.0,0.0,0.
> 0,0.0,0.0,0.0,0.0
>
> 20171118153421,2,0,12480,1,2316,3497,3443,1903,1893,1901,
> 1802,1809,2709,2765,3116,2859,3195,2774,1844,1816,0024,1880,
> 1819,1824,2006,0063,0095,1644,1648,0831,0673,1551,2521,2155,
> 0000,0521,196609,0000,0001,0001,0000,0000,0000,0000,0000,0001,0001
>
> 73, Edson PY2SDR
>
>
> On Sat, Nov 18, 2017 at 1:45 PM, Ray Hoad <ray.hoad@xxxxxxxx.xxx> wrote:
>
> > I concur. Use pre-launch TLE for now.
> >
> > Awaiting corrected POST-launch TLEs.
> >
> > Ray Hoad
> > WA5QGD
> > Orbital Elements Manager
> >
> > -----Original Message-----
> > From: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of Nico
> > Janssen
> > Sent: Saturday, November 18, 2017 06:40
> > To: the2belo@xxx.xxxxxxx.xx.xxx amsat-bb@xxxxx.xxx
> > Subject: Re: [amsat-bb] Fox 1B/RadFxSat launched successfully
> >
> > Ignore my remark on the 20 minute offset. I was checking against
> > a wrong TLE set. The pre-launch TLE set should still be used until
> > really measured TLE sets will be published later today.
> >
> > 73,
> > Nico PA0DLO
> >
> > On 18-11-17 12:46, Jeff A. Boyd wrote:
> > > On Sat, 18 Nov 2017 12:24:33 +0100, Nico Janssen <hamsat@xxxxxx.xx>
> > wrote:
> > >
> > >> The pre-lauch TLE set appears to be almost 20 minutes late.
> > > When should we expect an updated set? After it starts transmitting?
> > >
> >
------------------------------
Message: 6
Date: Sat, 18 Nov 2017 16:51:21 +0000 (UTC)
From: Mike McCann <kb2fmg@xxxxx.xxx>
To: "APBIDDLE@xxxxxxx.xxxx <APBIDDLE@xxxxxxx.xxx>, 'Stewart Todd
Morgan' <morgan_st@xxxxxxxxx.xxx>, "amsat-bb@xxxxx.xxxx
<amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] First Postlaunch Keps
Message-ID: <1012163453.794947.1511023881677@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
That didn't work for Gpredict. I looked at it a little further and found?
additional problems with the alignment of fields. This is just my opinion,
but I think would be more productive to post a properly formatted TLE file
on the AMSAT web site.
Mike KB2GHZ?
On Saturday, November 18, 2017 10:53 AM, Alan <wa4sca@xxxxx.xxx> wrote:
Unfortunately the formatting gets munged WRT to spaces.? I see formatting
differences depending on which mail client I use.? Usually if you adjust it
manually, it works.
73s,
Alan
WA4SCA
<-----Original Message-----
<From: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of
<Stewart Todd Morgan
<Sent: Saturday, November 18, 2017 09:02 AM
<To: amsat-bb@xxxxx.xxx
<Subject: [amsat-bb] First Postlaunch Keps
<
<Yeah, it screws up Orbitron as well.? Move the "07" on the second line
<to the left so that the "7" aligns with the "4" on the extreme right of
<the first line.? That should fix it.
<
<Todd
<AL0I
<
<
<_______________________________________________
<Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
<to all interested persons worldwide without requiring membership. Opinions
<expressed
<are solely those of the author, and do not reflect the official views of
AMSAT-
<NA.
<Not an AMSAT-NA member? Join now to support the amateur satellite
<program!
<Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 7
Date: Sat, 18 Nov 2017 18:17:48 +0100
From: "Albert van Deursen" <avdeur@xxxx.xx>
To: <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] recordings of RadFXSat . Project finding
Verronica - ex Douglas KA2UPW/5
Message-ID: <00b601d36091$2883ff60$798bfe20$@xx>
Content-Type: text/plain; charset="us-ascii"
Hi Douglas,
Plse send me a mail at avdeur@xxxx.xx so we can discuss how / where to
upload the 1.7 Gb IQ file I recorded is a first 27 NOV 17 12:31Z TLM pass
over W-EU.
73 Albert PD0OXW
-----Original Message-----
From: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of
amsat-bb-request@xxxxx.xxx
Sent: 18 November 2017 16:49
To: amsat-bb@xxxxx.xxx
Subject: AMSAT-BB Digest, Vol 12, Issue 299
Send AMSAT-BB mailing list submissions to
amsat-bb@xxxxx.xxx
To subscribe or unsubscribe via the World Wide Web, visit
http://www.amsat.org/mailman/listinfo/amsat-bb
or, via email, send a message with subject or body 'help' to
amsat-bb-request@xxxxx.xxx
You can reach the person managing the list at
amsat-bb-owner@xxxxx.xxx
When replying, please edit your Subject line so it is more specific than
"Re: Contents of AMSAT-BB digest..."
------------------------------
Message: 8
Date: Sat, 18 Nov 2017 11:28:46 -0600
From: "George Henry" <ka3hsw@xxx.xxx>
To: <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Fox-1B just heard in Chicagoland!
Message-ID: <55C1E5BC59C042E18AD60949F3F95613@xxxxxxxxxxx>
Content-Type: text/plain; charset="us-ascii"
Just heard her announce "Fox-1B Safe Mode"! Not currently set up to decode
telemetry, though.
George, KA3HSW
------------------------------
Message: 9
Date: Sat, 18 Nov 2017 15:27:54 -0200
From: PY5LF <py5lf@xxxxxxxxxxxxx.xxx.xx>
To: AMSAT-BB <AMSAT-BB@xxxxx.xxx>
Subject: [amsat-bb] RadFxSat
Message-ID:
<CAAy53m6a0+LyCWnnoU+3U00nhdTCqVHhg3z-d1fmWVJ2vi0OZw@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
Hi
Very good signal over here at 18NOV2017 , 17:10UTC.
73
------------------------------
Message: 10
Date: Sat, 18 Nov 2017 12:46:47 -0500
From: Paul Stoetzer <n8hm@xxxx.xxx>
To: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] AO-91 Keps
Message-ID:
<CABzOSOrX6uqC5POqa1c5AvyBHGvQsP-edspZc7D5y1-Qb+AdrQ@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
Celestrak now has four objects from today's launch in their catalog.
2017-073C (Object 43015) tracked Doppler perfectly during the last
pass over North America, but the identification of the various objects
is subject to change as they separate.
2017-073C
1 43015U 17073C 17322.62015174 -.00000076 00000-0 00000+0 0 9995
2 43015 97.6873 257.7630 0258702 236.7177 305.5679 14.77570475 37
https://celestrak.com/NORAD/elements/tle-new.txt
73,
Paul, N8HM
------------------------------
Message: 11
Date: Sat, 18 Nov 2017 11:48:03 -0600
From: Red Willoughby <red@xxxxxxxxxxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] RadFxSat
Message-ID: <6633f7f3-6aee-28e4-4cff-ba6e33e67615@xxxxxxxxxxxxx.xxx>
Content-Type: text/plain; charset=utf-8; format=flowed
I was able to decode only one frame during the 1722Z pass. It was just
15 degrees maximum elevation. The next pass will be 58 degrees for me,
so perhaps the number of decodes will increase. Congrats to all who have
worked so long and hard on this project.
Red
KC4LE
------------------------------
Message: 12
Date: Sat, 18 Nov 2017 18:20:58 +0000 (UTC)
From: Nitin Muttin <vu3tyg@xxxxx.xx.xx>
To: Mike McCann <kb2fmg@xxxxx.xxx>, "APBIDDLE@xxxxxxx.xxxx
<APBIDDLE@xxxxxxx.xxx>, 'Stewart Todd Morgan'
<morgan_st@xxxxxxxxx.xxx>, "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] First Postlaunch Keps
Message-ID: <220721828.1169928.1511029258549@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Hi Mike,
I use orbitron and adjusting the alignment as below works for me.
RadFxSat1 00000U 17000A ? 17322.46057870 -.00000000 ?00000-0 ?00000-0 0
000042 00000 ?97.6996 257.5922 0258900 235.2917 178.7268 14.79536000 ? ?07?73
Nitin [VU3TYG]
From: Mike McCann via AMSAT-BB <amsat-bb@xxxxx.xxx>
To: "APBIDDLE@xxxxxxx.xxxx <APBIDDLE@xxxxxxx.xxx>; 'Stewart Todd Morgan'
<morgan_st@xxxxxxxxx.xxx>; "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Sent: Saturday, 18 November 2017 10:30 PM
Subject: Re: [amsat-bb] First Postlaunch Keps
That didn't work for Gpredict. I looked at it a little further and found?
additional problems with the alignment of fields. This is just my opinion,
but I think would be more productive to post a properly formatted TLE file
on the AMSAT web site.
Mike KB2GHZ??
? ? On Saturday, November 18, 2017 10:53 AM, Alan <wa4sca@xxxxx.xxx> wrote:
Unfortunately the formatting gets munged WRT to spaces.? I see formatting
differences depending on which mail client I use.? Usually if you adjust it
manually, it works.
73s,
Alan
WA4SCA
<-----Original Message-----
<From: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of
<Stewart Todd Morgan
<Sent: Saturday, November 18, 2017 09:02 AM
<To: amsat-bb@xxxxx.xxx
<Subject: [amsat-bb] First Postlaunch Keps
<
<Yeah, it screws up Orbitron as well.? Move the "07" on the second line
<to the left so that the "7" aligns with the "4" on the extreme right of
<the first line.? That should fix it.
<
<Todd
<AL0I
<
<
<_______________________________________________
<Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
<to all interested persons worldwide without requiring membership. Opinions
<expressed
<are solely those of the author, and do not reflect the official views of
AMSAT-
<NA.
<Not an AMSAT-NA member? Join now to support the amateur satellite
<program!
<Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
?
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 13
Date: Sat, 18 Nov 2017 15:58:03 -0300
From: Pedro Converso <pconver@xxxxx.xxx>
To: AMSAT <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] AO-91 Passes & record
Message-ID:
<CANTZqK=TQcQvQ=ac4DEMp9ypT1LP7WV1FtjPup+HPL2G4_av3A@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
Live tracking and frequencies available on
http://amsat.org.ar/pass.htm?sat=ao-91
Voice recorded on orbit 5 at Buenos Aires http://amsat.org.ar/ao-91.wav
Congratulations AMSAT-NA for success !
73, lu7abf, Pedro
------------------------------
Message: 14
Date: Sat, 18 Nov 2017 14:15:49 -0500
From: Paul Stoetzer <n8hm@xxxx.xxx>
To: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Fwd: [keps] Changes to AMSAT-NA TLE Distribution
for 11-18-17
Message-ID:
<CABzOSOoFsZiiXSNh3V-AGQ05jxWOXEUvLx-_6_S=9-9NGU=rCA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
FYI..AO-91 keps are now in the AMSAT keps distribution. Keep in mind
that the NORAD ID may change as the various objects on the launch
separate from each other. For now, we are using object 43015.
73,
Paul, N8HM
---------- Forwarded message ----------
From: Ray Hoad <ray.hoad@xxxxxxxx.xxx>
Date: Sat, Nov 18, 2017 at 2:05 PM
Subject: [keps] Changes to AMSAT-NA TLE Distribution for 11-18-17
To: KEPS <keps@xxxxx.xxx>
Yeah! RadFxSat (AO-91) is finally in orbit and working! Congrats to
Fox-1B team! Well done.
Note: RadFxSat (Fox-1B) has been designated AO-91 per Bill Tynan,
W3XO, AMSAT-NA OSCAR Number Administrator.
Be aware that AO-91 (NORAD CAT ID 43015) has NOT been released for
general use. Do NOT transmit to AO-91 until on-orbit tests are
complete. If you hear the transponder on, do NOT assume that AO-91 is
open for general use. Check the AMSAT website, Facebook, or Twitter
before transmitting.
All references to RadFxSat are gone. It is now AO-91.
_______________________________________________
Via the Keps mailing list courtesy of AMSAT-NA
http://www.amsat.org/mailman/listinfo/keps
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@xxxxx.xxx.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 12, Issue 300
*****************************************
Read previous mail | Read next mail
| |
