| |
CX2SA > SATDIG 11.01.18 22:44l 1014 Lines 35692 Bytes #999 (0) @ WW
BID : AMSATBB1315
Read: GUEST
Subj: AMSAT-BB-digest V13 15
Path: IW8PGT<CX2SA
Sent: 180111/2040Z @:CX2SA.SAL.URY.SOAM #:32159 [Salto] FBB7.00e $:AMSATBB1315
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Re: Getting Ready for Fox-1D (Nitin Muttin)
2. Updated Fox-1D Preliminary TLEs (Paul Stoetzer)
3. Re: Updated Fox-1D Preliminary TLEs (Paul Stoetzer)
4. Re: Updated Fox-1D Preliminary TLEs (David Johnson)
5. Re: Updated Fox-1D Preliminary TLEs (Dave Webb KB1PVH)
6. Re: Updated Fox-1D Preliminary TLEs (Burns Fisher)
7. PK96 TNC / Falconsat (Tony)
8. Re: Updated Fox-1D Preliminary TLEs (David Johnson)
9. Re: Updated Fox-1D Preliminary TLEs (Mark L. Hammond)
10. Re: Updated Fox-1D Preliminary TLEs (Alan)
----------------------------------------------------------------------
Message: 1
Date: Thu, 11 Jan 2018 15:53:45 +0000 (UTC)
From: Nitin Muttin <vu3tyg@xxxxx.xx.xx>
To: ok2gz <ok2gz@xxxxxx.xx>, "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Getting Ready for Fox-1D
Message-ID: <458715119.1304426.1515686025265@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Thanks this is really useful, many a times I would spent time trying
manually.?73
Nitin [VU3TYG]
From: ok2gz <ok2gz@xxxxxx.xx>
To: amsat-bb@xxxxx.xxx
Sent: Thursday, 11 January 2018 8:56 PM
Subject: [amsat-bb] Getting Ready for Fox-1D
I tried to use preliminary data for FOX-1D from
https://www.amsat.org/getting-ready-for-fox-1d/ , by N8MH, but my
GPredict refused them ( new satellites = 0 ) .
So I wrote small program for check and repair of TLE data.
Here they are:
preFox-1D
1 99934U 1801D? ? 18012.17965046? .00000000? 00000-0? 00000-0 0? ? 18
2 99934? 97.5670? 73.8289 0005699 284.7026 298.7182 15.21980622? ? 19
You can try my program at the web address:
http://oscar.ok2gz.eu/fox1d.php
73??? Jarda ok2gz
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 2
Date: Thu, 11 Jan 2018 13:32:59 -0500
From: Paul Stoetzer <n8hm@xxxxx.xxx>
To: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Updated Fox-1D Preliminary TLEs
Message-ID:
<CABzOSOp+gL39j4DuFeJB2074Pa_X8Z+AzBRJUXgUH60GyExGiA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
Good afternoon,
Fox-1D launches in less than 10 hours! ISRO reports that fourth stage
fueling is complete, second stage fueling is underway, and the
countdown is proceeding nominally. Updated preliminary TLEs for Fox-1D
are:
Fox-1D
1 99934U 1801D 18012.18138657 .00000000 00000-0 00000-0 0 19
2 99934 97.5671 73.8300 0006273 277.3678 311.7572 15.21737581 17
Unfortunately the AMSAT website is currently down. We hope it will be
working in time to provide launch coverage, but if not, please follow
the AMSAT Twitter account (@xxxxxx and AMSAT North America Facebook
page (https://www.facebook.com/groups/7828379515/) for live updates.
If you have finished setting up your station to collect telemetry
(remember that the downlink frequency is 145.880 MHz, if using an SDR,
make sure you have set your LO frequency to cover Fox-1D's downlink),
then please take a look at the following video explaining the PSLV-C40
mission. Fox-1D is featured prominently among the American satellites
on the launch at 5:02 of the video
https://www.isro.gov.in/pslv-c40-cartosat-2-series-satellite-mission/pslv-c40-
cartosat-2-series-satellite-mission-curtain-0
Live launch video will be available at
https://www.isro.gov.in/pslv-c40-cartosat-2-series-satellite-mission/watch-liv
e-pslv-c40-cartosat-2-series-satellite-mission
73,
Paul Stoetzer, N8HM
Executive Vice President
Radio Amateur Satellite Corporation (AMSAT)
------------------------------
Message: 3
Date: Thu, 11 Jan 2018 13:37:57 -0500
From: Paul Stoetzer <n8hm@xxxx.xxx>
To: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Updated Fox-1D Preliminary TLEs
Message-ID:
<CABzOSOog_=aPUmWjBJ5+vqWPka1yvC+ZG1KbyAweTpbSxV9egw@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
I have just discovered that individual files are still accessible on
the AMSAT website. The Getting Ready for Fox-1D PDF is available at
https://www.amsat.org/wordpress/wp-content/uploads/2018/01/Getting-Ready-for-F
ox-1D.pdf
Please note that the TLEs in that document are now outdated, please
use the TLEs in the previous post.
73,
Paul, N8HM
On Thu, Jan 11, 2018 at 1:32 PM, Paul Stoetzer <n8hm@xxxxx.xxx> wrote:
> Good afternoon,
>
> Fox-1D launches in less than 10 hours! ISRO reports that fourth stage
> fueling is complete, second stage fueling is underway, and the
> countdown is proceeding nominally. Updated preliminary TLEs for Fox-1D
> are:
>
> Fox-1D
> 1 99934U 1801D 18012.18138657 .00000000 00000-0 00000-0 0 19
> 2 99934 97.5671 73.8300 0006273 277.3678 311.7572 15.21737581 17
>
> Unfortunately the AMSAT website is currently down. We hope it will be
> working in time to provide launch coverage, but if not, please follow
> the AMSAT Twitter account (@xxxxxx and AMSAT North America Facebook
> page (https://www.facebook.com/groups/7828379515/) for live updates.
>
> If you have finished setting up your station to collect telemetry
> (remember that the downlink frequency is 145.880 MHz, if using an SDR,
> make sure you have set your LO frequency to cover Fox-1D's downlink),
> then please take a look at the following video explaining the PSLV-C40
> mission. Fox-1D is featured prominently among the American satellites
> on the launch at 5:02 of the video
>
https://www.isro.gov.in/pslv-c40-cartosat-2-series-satellite-mission/pslv-c40-
cartosat-2-series-satellite-mission-curtain-0
>
> Live launch video will be available at
>
https://www.isro.gov.in/pslv-c40-cartosat-2-series-satellite-mission/watch-liv
e-pslv-c40-cartosat-2-series-satellite-mission
>
>
> 73,
>
> Paul Stoetzer, N8HM
> Executive Vice President
> Radio Amateur Satellite Corporation (AMSAT)
------------------------------
Message: 4
Date: Thu, 11 Jan 2018 13:06:51 -0600
From: David Johnson <david.johnson.bbq@xxxxx.xxx>
To: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Updated Fox-1D Preliminary TLEs
Message-ID:
<CAPz2khYnN7h0Rbn5i+ieP1OWZokNX15bLEUVT1o=jtBLq+R89w@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
Are there any instructions posted anywhere for manually adding Fox 1-D to
SatPC32?
Thanks,
Dave, W9DWJ
On Thu, Jan 11, 2018 at 12:37 PM, Paul Stoetzer <n8hm@xxxx.xxx> wrote:
> I have just discovered that individual files are still accessible on
> the AMSAT website. The Getting Ready for Fox-1D PDF is available at
> https://www.amsat.org/wordpress/wp-content/uploads/
> 2018/01/Getting-Ready-for-Fox-1D.pdf
>
> Please note that the TLEs in that document are now outdated, please
> use the TLEs in the previous post.
>
> 73,
>
> Paul, N8HM
>
> On Thu, Jan 11, 2018 at 1:32 PM, Paul Stoetzer <n8hm@xxxxx.xxx> wrote:
> > Good afternoon,
> >
> > Fox-1D launches in less than 10 hours! ISRO reports that fourth stage
> > fueling is complete, second stage fueling is underway, and the
> > countdown is proceeding nominally. Updated preliminary TLEs for Fox-1D
> > are:
> >
> > Fox-1D
> > 1 99934U 1801D 18012.18138657 .00000000 00000-0 00000-0 0 19
> > 2 99934 97.5671 73.8300 0006273 277.3678 311.7572 15.21737581 17
> >
> > Unfortunately the AMSAT website is currently down. We hope it will be
> > working in time to provide launch coverage, but if not, please follow
> > the AMSAT Twitter account (@xxxxxx and AMSAT North America Facebook
> > page (https://www.facebook.com/groups/7828379515/) for live updates.
> >
> > If you have finished setting up your station to collect telemetry
> > (remember that the downlink frequency is 145.880 MHz, if using an SDR,
> > make sure you have set your LO frequency to cover Fox-1D's downlink),
> > then please take a look at the following video explaining the PSLV-C40
> > mission. Fox-1D is featured prominently among the American satellites
> > on the launch at 5:02 of the video
> > https://www.isro.gov.in/pslv-c40-cartosat-2-series-
> satellite-mission/pslv-c40-cartosat-2-series-satellite-mission-curtain-0
> >
> > Live launch video will be available at
> > https://www.isro.gov.in/pslv-c40-cartosat-2-series-
> satellite-mission/watch-live-pslv-c40-cartosat-2-series-satellite-mission
> >
> >
> > 73,
> >
> > Paul Stoetzer, N8HM
> > Executive Vice President
> > Radio Amateur Satellite Corporation (AMSAT)
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
--
David Johnson
------------------------------
Message: 5
Date: Thu, 11 Jan 2018 14:48:53 -0500
From: Dave Webb KB1PVH <kb1pvh@xxxxx.xxx>
To: David Johnson <david.johnson.bbq@xxxxx.xxx>
Cc: AMSAT -BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Updated Fox-1D Preliminary TLEs
Message-ID:
<CAEMY9Fc2VL3bmk1YN_aqXj8r89_emg0+Br1ma0ygAMzVBSKigw@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
Yes, in the SatPC32 manual, but also here.
https://amsat-uk.org/2013/11/23/adding-new-satellites-to-satpc32/
Dave-KB1PVH
Sent from my Galaxy S7
On Jan 11, 2018 2:40 PM, "David Johnson" <david.johnson.bbq@xxxxx.xxx>
wrote:
> Are there any instructions posted anywhere for manually adding Fox 1-D to
> SatPC32?
>
> Thanks,
> Dave, W9DWJ
>
> On Thu, Jan 11, 2018 at 12:37 PM, Paul Stoetzer <n8hm@xxxx.xxx> wrote:
>
> > I have just discovered that individual files are still accessible on
> > the AMSAT website. The Getting Ready for Fox-1D PDF is available at
> > https://www.amsat.org/wordpress/wp-content/uploads/
> > 2018/01/Getting-Ready-for-Fox-1D.pdf
> >
> > Please note that the TLEs in that document are now outdated, please
> > use the TLEs in the previous post.
> >
> > 73,
> >
> > Paul, N8HM
> >
> > On Thu, Jan 11, 2018 at 1:32 PM, Paul Stoetzer <n8hm@xxxxx.xxx> wrote:
> > > Good afternoon,
> > >
> > > Fox-1D launches in less than 10 hours! ISRO reports that fourth stage
> > > fueling is complete, second stage fueling is underway, and the
> > > countdown is proceeding nominally. Updated preliminary TLEs for Fox-1D
> > > are:
> > >
> > > Fox-1D
> > > 1 99934U 1801D 18012.18138657 .00000000 00000-0 00000-0 0 19
> > > 2 99934 97.5671 73.8300 0006273 277.3678 311.7572 15.21737581 17
> > >
> > > Unfortunately the AMSAT website is currently down. We hope it will be
> > > working in time to provide launch coverage, but if not, please follow
> > > the AMSAT Twitter account (@xxxxxx and AMSAT North America Facebook
> > > page (https://www.facebook.com/groups/7828379515/) for live updates.
> > >
> > > If you have finished setting up your station to collect telemetry
> > > (remember that the downlink frequency is 145.880 MHz, if using an SDR,
> > > make sure you have set your LO frequency to cover Fox-1D's downlink),
> > > then please take a look at the following video explaining the PSLV-C40
> > > mission. Fox-1D is featured prominently among the American satellites
> > > on the launch at 5:02 of the video
> > > https://www.isro.gov.in/pslv-c40-cartosat-2-series-
> > satellite-mission/pslv-c40-cartosat-2-series-satellite-mission-curtain-0
> > >
> > > Live launch video will be available at
> > > https://www.isro.gov.in/pslv-c40-cartosat-2-series-
> > satellite-mission/watch-live-pslv-c40-cartosat-2-series-
> satellite-mission
> > >
> > >
> > > 73,
> > >
> > > Paul Stoetzer, N8HM
> > > Executive Vice President
> > > Radio Amateur Satellite Corporation (AMSAT)
> > _______________________________________________
> > Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions
> > expressed
> > are solely those of the author, and do not reflect the official views of
> > AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >
>
>
>
> --
> David Johnson
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 6
Date: Thu, 11 Jan 2018 14:49:31 -0500
From: Burns Fisher <burns@xxxxxx.xx>
To: David Johnson <david.johnson.bbq@xxxxx.xxx>
Cc: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Updated Fox-1D Preliminary TLEs
Message-ID:
<CABX7KxUF7ufTVgr25TKPMiMhpPOpGcghgN_6+70O_c-R9tmhpQ@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
There probably are such instructions, but all I did was to put the TLE in a
file in the same directory as the rest of the keps. Look under the
"Satellites" menu and see "Path:" It is something like
username/AppData/Roaming/SatPC32/Kepler. The go to that same menu and
dialog box (you may have to restart SatPC32), select the file you just put
there, and then select Fox-1D (the only sat in that file).
Unfortunately, that wipes out the sats that you had chosen from a previous
file. You might also edit the previous file you were using (like nasa.all)
and add Fox-1D to the end. Just don't update it until you hear that the
Fox-1D, perhaps with a new name, is there. BTW, when 1D is open to the
public, you will also want to edit subtone.sql and add the 67Hz tone there.
On Thu, Jan 11, 2018 at 2:06 PM, David Johnson <david.johnson.bbq@xxxxx.xxx>
wrote:
> Are there any instructions posted anywhere for manually adding Fox 1-D to
> SatPC32?
>
> Thanks,
> Dave, W9DWJ
>
> On Thu, Jan 11, 2018 at 12:37 PM, Paul Stoetzer <n8hm@xxxx.xxx> wrote:
>
> > I have just discovered that individual files are still accessible on
> > the AMSAT website. The Getting Ready for Fox-1D PDF is available at
> > https://www.amsat.org/wordpress/wp-content/uploads/
> > 2018/01/Getting-Ready-for-Fox-1D.pdf
> >
> > Please note that the TLEs in that document are now outdated, please
> > use the TLEs in the previous post.
> >
> > 73,
> >
> > Paul, N8HM
> >
> > On Thu, Jan 11, 2018 at 1:32 PM, Paul Stoetzer <n8hm@xxxxx.xxx> wrote:
> > > Good afternoon,
> > >
> > > Fox-1D launches in less than 10 hours! ISRO reports that fourth stage
> > > fueling is complete, second stage fueling is underway, and the
> > > countdown is proceeding nominally. Updated preliminary TLEs for Fox-1D
> > > are:
> > >
> > > Fox-1D
> > > 1 99934U 1801D 18012.18138657 .00000000 00000-0 00000-0 0 19
> > > 2 99934 97.5671 73.8300 0006273 277.3678 311.7572 15.21737581 17
> > >
> > > Unfortunately the AMSAT website is currently down. We hope it will be
> > > working in time to provide launch coverage, but if not, please follow
> > > the AMSAT Twitter account (@xxxxxx and AMSAT North America Facebook
> > > page (https://www.facebook.com/groups/7828379515/) for live updates.
> > >
> > > If you have finished setting up your station to collect telemetry
> > > (remember that the downlink frequency is 145.880 MHz, if using an SDR,
> > > make sure you have set your LO frequency to cover Fox-1D's downlink),
> > > then please take a look at the following video explaining the PSLV-C40
> > > mission. Fox-1D is featured prominently among the American satellites
> > > on the launch at 5:02 of the video
> > > https://www.isro.gov.in/pslv-c40-cartosat-2-series-
> > satellite-mission/pslv-c40-cartosat-2-series-satellite-mission-curtain-0
> > >
> > > Live launch video will be available at
> > > https://www.isro.gov.in/pslv-c40-cartosat-2-series-
> > satellite-mission/watch-live-pslv-c40-cartosat-2-series-
> satellite-mission
> > >
> > >
> > > 73,
> > >
> > > Paul Stoetzer, N8HM
> > > Executive Vice President
> > > Radio Amateur Satellite Corporation (AMSAT)
> > _______________________________________________
> > Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions
> > expressed
> > are solely those of the author, and do not reflect the official views of
> > AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >
>
>
>
> --
> David Johnson
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 7
Date: Thu, 11 Jan 2018 15:17:17 -0500
From: Tony <dxdx@xxxxxxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] PK96 TNC / Falconsat
Message-ID: <8dc21560-12c8-f8dd-c273-481a341a7f78@xxxxxxxxx.xxx>
Content-Type: text/plain; charset=utf-8; format=flowed
All:
Anyone in the group using the PK-96 TNC for 9600 baud satellites?
Tony -K2MO
------------------------------
Message: 8
Date: Thu, 11 Jan 2018 14:19:01 -0600
From: David Johnson <david.johnson.bbq@xxxxx.xxx>
To: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Updated Fox-1D Preliminary TLEs
Message-ID:
<CAPz2khazQwk9TuW1zVxrs321QFQLk64Q13mbu3VdeK6kRZ0rew@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
Thanks for the help. I'm pretty new to SatPC32 and the manual leaves some
questions unaswered. Is there an entry for the Doppler.SQF file or will
that come later? For now I can at least see and follow the footprint on
the map. Thanks again!
Dave, W9DWJ
On Thu, Jan 11, 2018 at 1:49 PM, Burns Fisher <burns@xxxxxx.xx> wrote:
> There probably are such instructions, but all I did was to put the TLE in
> a file in the same directory as the rest of the keps. Look under the
> "Satellites" menu and see "Path:" It is something like
> username/AppData/Roaming/SatPC32/Kepler. The go to that same menu and
> dialog box (you may have to restart SatPC32), select the file you just put
> there, and then select Fox-1D (the only sat in that file).
>
> Unfortunately, that wipes out the sats that you had chosen from a previous
> file. You might also edit the previous file you were using (like nasa.all)
> and add Fox-1D to the end. Just don't update it until you hear that the
> Fox-1D, perhaps with a new name, is there. BTW, when 1D is open to the
> public, you will also want to edit subtone.sql and add the 67Hz tone there.
>
> On Thu, Jan 11, 2018 at 2:06 PM, David Johnson <
> david.johnson.bbq@xxxxx.xxx> wrote:
>
>> Are there any instructions posted anywhere for manually adding Fox 1-D to
>> SatPC32?
>>
>> Thanks,
>> Dave, W9DWJ
>>
>> On Thu, Jan 11, 2018 at 12:37 PM, Paul Stoetzer <n8hm@xxxx.xxx> wrote:
>>
>> > I have just discovered that individual files are still accessible on
>> > the AMSAT website. The Getting Ready for Fox-1D PDF is available at
>> > https://www.amsat.org/wordpress/wp-content/uploads/
>> > 2018/01/Getting-Ready-for-Fox-1D.pdf
>> >
>> > Please note that the TLEs in that document are now outdated, please
>> > use the TLEs in the previous post.
>> >
>> > 73,
>> >
>> > Paul, N8HM
>> >
>> > On Thu, Jan 11, 2018 at 1:32 PM, Paul Stoetzer <n8hm@xxxxx.xxx> wrote:
>> > > Good afternoon,
>> > >
>> > > Fox-1D launches in less than 10 hours! ISRO reports that fourth stage
>> > > fueling is complete, second stage fueling is underway, and the
>> > > countdown is proceeding nominally. Updated preliminary TLEs for Fox-1D
>> > > are:
>> > >
>> > > Fox-1D
>> > > 1 99934U 1801D 18012.18138657 .00000000 00000-0 00000-0 0 19
>> > > 2 99934 97.5671 73.8300 0006273 277.3678 311.7572 15.21737581 17
>> > >
>> > > Unfortunately the AMSAT website is currently down. We hope it will be
>> > > working in time to provide launch coverage, but if not, please follow
>> > > the AMSAT Twitter account (@xxxxxx and AMSAT North America Facebook
>> > > page (https://www.facebook.com/groups/7828379515/) for live updates.
>> > >
>> > > If you have finished setting up your station to collect telemetry
>> > > (remember that the downlink frequency is 145.880 MHz, if using an SDR,
>> > > make sure you have set your LO frequency to cover Fox-1D's downlink),
>> > > then please take a look at the following video explaining the PSLV-C40
>> > > mission. Fox-1D is featured prominently among the American satellites
>> > > on the launch at 5:02 of the video
>> > > https://www.isro.gov.in/pslv-c40-cartosat-2-series-
>> > satellite-mission/pslv-c40-cartosat-2-series-satellite-missi
>> on-curtain-0
>> > >
>> > > Live launch video will be available at
>> > > https://www.isro.gov.in/pslv-c40-cartosat-2-series-
>> > satellite-mission/watch-live-pslv-c40-cartosat-2-series-sate
>> llite-mission
>> > >
>> > >
>> > > 73,
>> > >
>> > > Paul Stoetzer, N8HM
>> > > Executive Vice President
>> > > Radio Amateur Satellite Corporation (AMSAT)
>> > _______________________________________________
>> > Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
>> > to all interested persons worldwide without requiring membership.
>> Opinions
>> > expressed
>> > are solely those of the author, and do not reflect the official views of
>> > AMSAT-NA.
>> > Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>> >
>>
>>
>>
>> --
>> David Johnson
>> _______________________________________________
>> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>>
>
>
--
David Johnson
------------------------------
Message: 9
Date: Thu, 11 Jan 2018 15:31:17 -0500
From: "Mark L. Hammond" <marklhammond@xxxxx.xxx>
To: David Johnson <david.johnson.bbq@xxxxx.xxx>
Cc: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Updated Fox-1D Preliminary TLEs
Message-ID:
<CAPRXzyry7U1UDco_K93tRyrUpYJk09gTxyciyQ71Wmg9tFA5_w@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
For Doppler.SQF, might as well add the others now, too! (Thanks to Alan
WA4SCA is in order, I think..)
FOX-1C,145920,435300,FM,FM,NOR,0,0,Preliminary
FOX-1C,145920,1267300,FM,FM,NOR,0,0,Preliminary L-up
FOX-1D,145880,435350,FM,FM,NOR,0,0,Preliminary
FOX-1D,145880,1267350,FM,FM,NOR,0,0,Preliminary L-up
FOX-1E,435915.0,145885.0,USB,LSB,0,0,+/-30 KHz
On Thu, Jan 11, 2018 at 3:19 PM, David Johnson <david.johnson.bbq@xxxxx.xxx>
wrote:
> Thanks for the help. I'm pretty new to SatPC32 and the manual leaves some
> questions unaswered. Is there an entry for the Doppler.SQF file or will
> that come later? For now I can at least see and follow the footprint on
> the map. Thanks again!
>
> Dave, W9DWJ
>
> On Thu, Jan 11, 2018 at 1:49 PM, Burns Fisher <burns@xxxxxx.xx> wrote:
>
> > There probably are such instructions, but all I did was to put the TLE in
> > a file in the same directory as the rest of the keps. Look under the
> > "Satellites" menu and see "Path:" It is something like
> > username/AppData/Roaming/SatPC32/Kepler. The go to that same menu and
> > dialog box (you may have to restart SatPC32), select the file you just
> put
> > there, and then select Fox-1D (the only sat in that file).
> >
> > Unfortunately, that wipes out the sats that you had chosen from a
> previous
> > file. You might also edit the previous file you were using (like
> nasa.all)
> > and add Fox-1D to the end. Just don't update it until you hear that the
> > Fox-1D, perhaps with a new name, is there. BTW, when 1D is open to the
> > public, you will also want to edit subtone.sql and add the 67Hz tone
> there.
> >
> > On Thu, Jan 11, 2018 at 2:06 PM, David Johnson <
> > david.johnson.bbq@xxxxx.xxx> wrote:
> >
> >> Are there any instructions posted anywhere for manually adding Fox 1-D
> to
> >> SatPC32?
> >>
> >> Thanks,
> >> Dave, W9DWJ
> >>
> >> On Thu, Jan 11, 2018 at 12:37 PM, Paul Stoetzer <n8hm@xxxx.xxx> wrote:
> >>
> >> > I have just discovered that individual files are still accessible on
> >> > the AMSAT website. The Getting Ready for Fox-1D PDF is available at
> >> > https://www.amsat.org/wordpress/wp-content/uploads/
> >> > 2018/01/Getting-Ready-for-Fox-1D.pdf
> >> >
> >> > Please note that the TLEs in that document are now outdated, please
> >> > use the TLEs in the previous post.
> >> >
> >> > 73,
> >> >
> >> > Paul, N8HM
> >> >
> >> > On Thu, Jan 11, 2018 at 1:32 PM, Paul Stoetzer <n8hm@xxxxx.xxx>
> wrote:
> >> > > Good afternoon,
> >> > >
> >> > > Fox-1D launches in less than 10 hours! ISRO reports that fourth
> stage
> >> > > fueling is complete, second stage fueling is underway, and the
> >> > > countdown is proceeding nominally. Updated preliminary TLEs for
> Fox-1D
> >> > > are:
> >> > >
> >> > > Fox-1D
> >> > > 1 99934U 1801D 18012.18138657 .00000000 00000-0 00000-0 0
> 19
> >> > > 2 99934 97.5671 73.8300 0006273 277.3678 311.7572 15.21737581
> 17
> >> > >
> >> > > Unfortunately the AMSAT website is currently down. We hope it will
> be
> >> > > working in time to provide launch coverage, but if not, please
> follow
> >> > > the AMSAT Twitter account (@xxxxxx and AMSAT North America Facebook
> >> > > page (https://www.facebook.com/groups/7828379515/) for live
> updates.
> >> > >
> >> > > If you have finished setting up your station to collect telemetry
> >> > > (remember that the downlink frequency is 145.880 MHz, if using an
> SDR,
> >> > > make sure you have set your LO frequency to cover Fox-1D's
> downlink),
> >> > > then please take a look at the following video explaining the
> PSLV-C40
> >> > > mission. Fox-1D is featured prominently among the American
> satellites
> >> > > on the launch at 5:02 of the video
> >> > > https://www.isro.gov.in/pslv-c40-cartosat-2-series-
> >> > satellite-mission/pslv-c40-cartosat-2-series-satellite-missi
> >> on-curtain-0
> >> > >
> >> > > Live launch video will be available at
> >> > > https://www.isro.gov.in/pslv-c40-cartosat-2-series-
> >> > satellite-mission/watch-live-pslv-c40-cartosat-2-series-sate
> >> llite-mission
> >> > >
> >> > >
> >> > > 73,
> >> > >
> >> > > Paul Stoetzer, N8HM
> >> > > Executive Vice President
> >> > > Radio Amateur Satellite Corporation (AMSAT)
> >> > _______________________________________________
> >> > Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> >> > to all interested persons worldwide without requiring membership.
> >> Opinions
> >> > expressed
> >> > are solely those of the author, and do not reflect the official views
> of
> >> > AMSAT-NA.
> >> > Not an AMSAT-NA member? Join now to support the amateur satellite
> >> program!
> >> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >> >
> >>
> >>
> >>
> >> --
> >> David Johnson
> >> _______________________________________________
> >> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> >> to all interested persons worldwide without requiring membership.
> >> Opinions expressed
> >> are solely those of the author, and do not reflect the official views of
> >> AMSAT-NA.
> >> Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> >> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >>
> >
> >
>
>
> --
> David Johnson
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Mark L. Hammond [N8MH]
------------------------------
Message: 10
Date: Thu, 11 Jan 2018 14:32:38 -0600
From: "Alan" <wa4sca@xxxxx.xxx>
To: "'David Johnson'" <david.johnson.bbq@xxxxx.xxx>, "'AMSAT BB'"
<amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Updated Fox-1D Preliminary TLEs
Message-ID: <000001d38b1b$5277d800$f7678800$@xxxxx.xxx>
Content-Type: text/plain; charset="us-ascii"
Dave,
Here are the lines for Fox-1Cliff and Fox-1D:
FOX-1Cliff,145920,435300,FM,FM,NOR,0,0,U/V
FOX-1Cliff,145920,1267300,FM,FM,NOR,0,0,L/V
FOX-1D,145880,435350,FM,FM,NOR,0,0,U/V
FOX-1D,145880,1267350,FM,FM,NOR,0,0,L/V
Note that when they get an Oscar number, you will need to change the name in
each line to match, so SatPC32 will connect the two. Same for the Tone.sqf
file.
73,
Alan
WA4SCA
<-----Original Message-----
<From: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of David
<Johnson
<Sent: Thursday, January 11, 2018 14:19 PM
<To: AMSAT BB <amsat-bb@xxxxx.xxx>
<Subject: Re: [amsat-bb] Updated Fox-1D Preliminary TLEs
<
<Thanks for the help. I'm pretty new to SatPC32 and the manual leaves some
<questions unaswered. Is there an entry for the Doppler.SQF file or will
<that come later? For now I can at least see and follow the footprint on
<the map. Thanks again!
<
<Dave, W9DWJ
<
<On Thu, Jan 11, 2018 at 1:49 PM, Burns Fisher <burns@xxxxxx.xx> wrote:
<
<> There probably are such instructions, but all I did was to put the TLE in
<> a file in the same directory as the rest of the keps. Look under the
<> "Satellites" menu and see "Path:" It is something like
<> username/AppData/Roaming/SatPC32/Kepler. The go to that same menu
<and
<> dialog box (you may have to restart SatPC32), select the file you just
put
<> there, and then select Fox-1D (the only sat in that file).
<>
<> Unfortunately, that wipes out the sats that you had chosen from a
previous
<> file. You might also edit the previous file you were using (like
nasa.all)
<> and add Fox-1D to the end. Just don't update it until you hear that the
<> Fox-1D, perhaps with a new name, is there. BTW, when 1D is open to the
<> public, you will also want to edit subtone.sql and add the 67Hz tone
there.
<>
<> On Thu, Jan 11, 2018 at 2:06 PM, David Johnson <
<> david.johnson.bbq@xxxxx.xxx> wrote:
<>
<>> Are there any instructions posted anywhere for manually adding Fox 1-D
to
<>> SatPC32?
<>>
<>> Thanks,
<>> Dave, W9DWJ
<>>
<>> On Thu, Jan 11, 2018 at 12:37 PM, Paul Stoetzer <n8hm@xxxx.xxx> wrote:
<>>
<>> > I have just discovered that individual files are still accessible on
<>> > the AMSAT website. The Getting Ready for Fox-1D PDF is available at
<>> > https://www.amsat.org/wordpress/wp-content/uploads/
<>> > 2018/01/Getting-Ready-for-Fox-1D.pdf
<>> >
<>> > Please note that the TLEs in that document are now outdated, please
<>> > use the TLEs in the previous post.
<>> >
<>> > 73,
<>> >
<>> > Paul, N8HM
<>> >
<>> > On Thu, Jan 11, 2018 at 1:32 PM, Paul Stoetzer <n8hm@xxxxx.xxx>
<wrote:
<>> > > Good afternoon,
<>> > >
<>> > > Fox-1D launches in less than 10 hours! ISRO reports that fourth
stage
<>> > > fueling is complete, second stage fueling is underway, and the
<>> > > countdown is proceeding nominally. Updated preliminary TLEs for Fox-
<1D
<>> > > are:
<>> > >
<>> > > Fox-1D
<>> > > 1 99934U 1801D 18012.18138657 .00000000 00000-0 00000-0 0
19
<>> > > 2 99934 97.5671 73.8300 0006273 277.3678 311.7572 15.21737581
17
<>> > >
<>> > > Unfortunately the AMSAT website is currently down. We hope it will
be
<>> > > working in time to provide launch coverage, but if not, please
follow
<>> > > the AMSAT Twitter account (@xxxxxx and AMSAT North America
<Facebook
<>> > > page (https://www.facebook.com/groups/7828379515/) for live
<updates.
<>> > >
<>> > > If you have finished setting up your station to collect telemetry
<>> > > (remember that the downlink frequency is 145.880 MHz, if using an
<SDR,
<>> > > make sure you have set your LO frequency to cover Fox-1D's
<downlink),
<>> > > then please take a look at the following video explaining the
PSLV-C40
<>> > > mission. Fox-1D is featured prominently among the American
satellites
<>> > > on the launch at 5:02 of the video
<>> > > https://www.isro.gov.in/pslv-c40-cartosat-2-series-
<>> > satellite-mission/pslv-c40-cartosat-2-series-satellite-missi
<>> on-curtain-0
<>> > >
<>> > > Live launch video will be available at
<>> > > https://www.isro.gov.in/pslv-c40-cartosat-2-series-
<>> > satellite-mission/watch-live-pslv-c40-cartosat-2-series-sate
<>> llite-mission
<>> > >
<>> > >
<>> > > 73,
<>> > >
<>> > > Paul Stoetzer, N8HM
<>> > > Executive Vice President
<>> > > Radio Amateur Satellite Corporation (AMSAT)
<>> > _______________________________________________
<>> > Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum
<available
<>> > to all interested persons worldwide without requiring membership.
<>> Opinions
<>> > expressed
<>> > are solely those of the author, and do not reflect the official views
of
<>> > AMSAT-NA.
<>> > Not an AMSAT-NA member? Join now to support the amateur satellite
<>> program!
<>> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
<>> >
<>>
<>>
<>>
<>> --
<>> David Johnson
<>> _______________________________________________
<>> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum
<available
<>> to all interested persons worldwide without requiring membership.
<>> Opinions expressed
<>> are solely those of the author, and do not reflect the official views of
<>> AMSAT-NA.
<>> Not an AMSAT-NA member? Join now to support the amateur satellite
<program!
<>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
<>>
<>
<>
<
<
<--
<David Johnson
<_______________________________________________
<Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
<to all interested persons worldwide without requiring membership. Opinions
<expressed
<are solely those of the author, and do not reflect the official views of
AMSAT-
<NA.
<Not an AMSAT-NA member? Join now to support the amateur satellite
<program!
<Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@xxxxx.xxx.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 13, Issue 15
****************************************
Read previous mail | Read next mail
| |
