| |
CX2SA > SATDIG 07.05.18 18:23l 961 Lines 30881 Bytes #999 (0) @ WW
BID : AMSATBB13157
Read: GUEST
Subj: AMSAT-BB-digest V13 157
Path: IW8PGT<IR2UBX<OK0NBR<SV1CMG<ON0AR<OZ5BBS<CX2SA
Sent: 180507/1608Z @:CX2SA.SAL.URY.SOAM #:42002 [Salto] FBB7.00e $:AMSATBB13157
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. To SatPC Users (Vincenzo Mone)
2. Re: To SatPC Users (Erich Eichmann)
3. Re: To SatPC Users (kb2mjeff@???.????
4. Re: To SatPC Users (Robert Bruninga)
5. Re: To SatPC Users (kb2mjeff@???.????
6. Asking about FM sats frequency (Carlos Alberto)
7. Re: Asking about FM sats frequency (Roy Dean)
8. Re: Asking about FM sats frequency (Robert Switzer)
9. Re: Asking about FM sats frequency (John Geiger)
10. Re: Asking about FM sats frequency (Andrew Glasbrenner)
11. Re: Asking about FM sats frequency (Pedro Converso)
12. Re: Asking about FM sats frequency (Pedro Converso)
----------------------------------------------------------------------
Message: 1
Date: Sun, 6 May 2018 20:11:55 +0200
From: "Vincenzo Mone" <vimone@?????.??>
To: "Amsat - BBs" <amsat-bb@?????.???>
Subject: [amsat-bb] To SatPC Users
Message-ID:
<!&!AAAAAAAAAAAYAAAAAAAAALgqrd2N1rRAiaQvRd7pgRDCgAAAEAAAAFR4nh9ZIChOtSvd9tTryx
0BAAAAAA==@?????.??>
Content-Type: text/plain; charset="utf-8"
Hi Folks,
Today I got the brilliant idea of ??wanting to receive the packet with my
Kenwood TS-2000X with its internal TNC while the SatPC
program was loaded but I noticed that launching the terminal program I had
the COM port error of the when already in use.
Now my question is: is there anyone with the same configuration as I was
able to receive and decode the packet while using
the SatPc program?
What if you want to interact with the ISS while it is in packet mode?
Any help will be really appreciated
73's de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
*************************************
******* GSM +39 328 7110193 *******
****** SMS +39 328 7110193 ******
*************************************
------------------------------
Message: 2
Date: Sun, 6 May 2018 22:31:00 +0200
From: Erich Eichmann <erich.eichmann@????????.??>
To: Vincenzo Mone <vimone@?????.??>, AMSAT-BB@?????.???
Subject: Re: [amsat-bb] To SatPC Users
Message-ID: <fe462c8c-62cb-aa93-e1f0-8351395d0daf@????????.??>
Content-Type: text/plain; charset=utf-8; format=flowed
Hello Vincent,
the problem you have with the internal TNC of the TS-2000 has nothing to
do with SatPC32. When the 9k6 Pacsats UO-22, KO-23 and KO-25 were
operational (about 15 years ago) my friend Guenther, DL9BU, and I worked
these sats using the Symek TNC 2H and TNC 3S and Wisp32 for data control
and SatPC32/Wisat32 for rotor and radio control without any problem.
Several users ran these combinations? around the clock using the auto
select features of Wisp32 and SatPC32. We - particular DL9BU - also
tried very intensively? to work these sats using the internal TNC of our
TS-2000s, but no success. I don't know any one who got the internal TNC
working for satellite packet operation.
73s, Erich, DK1TB
Am 06.05.2018 um 20:01 schrieb Vincenzo Mone:
> Hi Folks,
>
>
> Today I got the brilliant idea of ??wanting to receive the packet with my
Kenwood TS-2000X with its internal TNC while the SatPC
>
> program was loaded but I noticed that launching the terminal program I had
the error of the behavior in when already in use.
>
> Now my question is: is there anyone with the same configuration as I was
able to receive and decode the packet while using
>
> the SatPc program?
>
> What if you want to interact with the ISS while it is in packet mode?
> Any help will be really appreciated
>
>
>
>
>
>
>
> 73 de Enzo IK8OZV
> EasyLog 5 BetaTester
> EasyLog PDA BetaTester
> WinBollet BetaTester
> D.C.I. CheckPoint Regione Campania
> Skype: ik8ozv8520
>
>
>
>
> *******************************************
> ****** GSM +39 328 7110193 ******
> ***** SMS +39 328 7110193 *****
> *******************************************
>
>
>
> _______________________________________________
> Sent viaAMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings:http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 3
Date: Sun, 6 May 2018 17:41:26 -0400
From: <kb2mjeff@???.???>
To: "Vincenzo Mone" <vimone@?????.??>, <AMSAT-BB@?????.???>
Subject: Re: [amsat-bb] To SatPC Users
Message-ID: <54C74F88B3594728A65E69E5AD0DF7D7@???????>
Content-Type: text/plain; format=flowed; charset="UTF-8";
reply-type=response
The problem is there is only one comport on the TS-2000. You can use it to
use the internal TNC with a computer, or you can use it for Doppler control
with SatPC32. One or the other. But, you might be able to set the TNC up to
beacon un-attended and use software to control Doppler via the comport.
Never tried to do it, but it should be possible...
73 Jeff kb2m
-----Original Message-----
From: Erich Eichmann
Sent: Sunday, May 06, 2018 4:31 PM
To: Vincenzo Mone ; AMSAT-BB@?????.???
Subject: Re: [amsat-bb] To SatPC Users
Hello Vincent,
the problem you have with the internal TNC of the TS-2000 has nothing to
do with SatPC32. When the 9k6 Pacsats UO-22, KO-23 and KO-25 were
operational (about 15 years ago) my friend Guenther, DL9BU, and I worked
these sats using the Symek TNC 2H and TNC 3S and Wisp32 for data control
and SatPC32/Wisat32 for rotor and radio control without any problem.
Several users ran these combinations around the clock using the auto
select features of Wisp32 and SatPC32. We - particular DL9BU - also
tried very intensively to work these sats using the internal TNC of our
TS-2000s, but no success. I don't know any one who got the internal TNC
working for satellite packet operation.
73s, Erich, DK1TB
Am 06.05.2018 um 20:01 schrieb Vincenzo Mone:
> Hi Folks,
>
>
> Today I got the brilliant idea of ??wanting to receive the packet with my
> Kenwood TS-2000X with its internal TNC while the SatPC
>
> program was loaded but I noticed that launching the terminal program I had
> the error of the behavior in when already in use.
>
> Now my question is: is there anyone with the same configuration as I was
> able to receive and decode the packet while using
>
> the SatPc program?
>
> What if you want to interact with the ISS while it is in packet mode?
> Any help will be really appreciated
>
>
>
>
> 73 de Enzo IK8OZV
> EasyLog 5 BetaTester
> EasyLog PDA BetaTester
> WinBollet BetaTester
> D.C.I. CheckPoint Regione Campania
> Skype: ik8ozv8520
>
>
>
>
> *******************************************
> ****** GSM +39 328 7110193 ******
> ***** SMS +39 328 7110193 *****
> *******************************************
>
>
> _______________________________________________
> Sent viaAMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings:http://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
---
This email has been checked for viruses by AVG.
http://www.avg.com
------------------------------
Message: 4
Date: Sun, 6 May 2018 18:01:41 -0400
From: Robert Bruninga <bruninga@????.???>
To: amsat bb <amsat-bb@?????.???>
Subject: Re: [amsat-bb] To SatPC Users
Message-ID:
<CALdCfNJhQiGUoH2Ngvtj_jtNkk+NfBKNTHLP4-0bon-1R-p_Aw@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
He means "Beacon with the serial port unattended (though the operations
still manned...)"
Since unattended beacons via the APRS digipteaters in space are not welcome
except
for possibly some special events or experiments. Bob, WB4a{R
On Sun, May 6, 2018 at 5:41 PM, <kb2mjeff@???.???> wrote:
> The problem is there is only one comport on the TS-2000. You can use it to
> use the internal TNC with a computer, or you can use it for Doppler control
> with SatPC32. One or the other. But, you might be able to set the TNC up to
> beacon un-attended and use software to control Doppler via the comport.
> Never tried to do it, but it should be possible...
>
> 73 Jeff kb2m
>
> -----Original Message----- From: Erich Eichmann
> Sent: Sunday, May 06, 2018 4:31 PM
> To: Vincenzo Mone ; AMSAT-BB@?????.???
> Subject: Re: [amsat-bb] To SatPC Users
>
> Hello Vincent,
> the problem you have with the internal TNC of the TS-2000 has nothing to
> do with SatPC32. When the 9k6 Pacsats UO-22, KO-23 and KO-25 were
> operational (about 15 years ago) my friend Guenther, DL9BU, and I worked
> these sats using the Symek TNC 2H and TNC 3S and Wisp32 for data control
> and SatPC32/Wisat32 for rotor and radio control without any problem.
> Several users ran these combinations around the clock using the auto
> select features of Wisp32 and SatPC32. We - particular DL9BU - also
> tried very intensively to work these sats using the internal TNC of our
> TS-2000s, but no success. I don't know any one who got the internal TNC
> working for satellite packet operation.
>
> 73s, Erich, DK1TB
>
> Am 06.05.2018 um 20:01 schrieb Vincenzo Mone:
>
>> Hi Folks,
>>
>>
>> Today I got the brilliant idea of ??wanting to receive the packet with my
>> Kenwood TS-2000X with its internal TNC while the SatPC
>>
>> program was loaded but I noticed that launching the terminal program I
>> had the error of the behavior in when already in use.
>>
>> Now my question is: is there anyone with the same configuration as I was
>> able to receive and decode the packet while using
>>
>> the SatPc program?
>>
>> What if you want to interact with the ISS while it is in packet mode?
>> Any help will be really appreciated
>>
>>
>>
>>
>> 73 de Enzo IK8OZV
>> EasyLog 5 BetaTester
>> EasyLog PDA BetaTester
>> WinBollet BetaTester
>> D.C.I. CheckPoint Regione Campania
>> Skype: ik8ozv8520
>>
>>
>>
>>
>> *******************************************
>> ****** GSM +39 328 7110193 ******
>> ***** SMS +39 328 7110193 *****
>> *******************************************
>>
>>
>> _______________________________________________
>> Sent viaAMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings:http://www.amsat.org/mailman/listinfo/amsat-bb
>>
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
> ---
> This email has been checked for viruses by AVG.
> http://www.avg.com
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 5
Date: Sun, 6 May 2018 20:57:11 -0400
From: <kb2mjeff@???.???>
To: "amsat bb" <amsat-bb@?????.???>
Subject: Re: [amsat-bb] To SatPC Users
Message-ID: <280666583FAB4B15A20707671C077123@???????>
Content-Type: text/plain; format=flowed; charset="UTF-8";
reply-type=original
I wasn't trying to make a political statement, just trying to say what would
possibly work, in as few words as possible. I stand corrected :-)
73 Jeff kb2m
-----Original Message-----
From: Robert Bruninga
Sent: Sunday, May 06, 2018 6:01 PM
To: amsat bb
Subject: Re: [amsat-bb] To SatPC Users
He means "Beacon with the serial port unattended (though the operations
still manned...)"
Since unattended beacons via the APRS digipteaters in space are not welcome
except
for possibly some special events or experiments. Bob, WB4a{R
On Sun, May 6, 2018 at 5:41 PM, <kb2mjeff@???.???> wrote:
> The problem is there is only one comport on the TS-2000. You can use it to
> use the internal TNC with a computer, or you can use it for Doppler
> control
> with SatPC32. One or the other. But, you might be able to set the TNC up
> to
> beacon un-attended and use software to control Doppler via the comport.
> Never tried to do it, but it should be possible...
>
> 73 Jeff kb2m
>
> -----Original Message----- From: Erich Eichmann
> Sent: Sunday, May 06, 2018 4:31 PM
> To: Vincenzo Mone ; AMSAT-BB@?????.???
> Subject: Re: [amsat-bb] To SatPC Users
>
> Hello Vincent,
> the problem you have with the internal TNC of the TS-2000 has nothing to
> do with SatPC32. When the 9k6 Pacsats UO-22, KO-23 and KO-25 were
> operational (about 15 years ago) my friend Guenther, DL9BU, and I worked
> these sats using the Symek TNC 2H and TNC 3S and Wisp32 for data control
> and SatPC32/Wisat32 for rotor and radio control without any problem.
> Several users ran these combinations around the clock using the auto
> select features of Wisp32 and SatPC32. We - particular DL9BU - also
> tried very intensively to work these sats using the internal TNC of our
> TS-2000s, but no success. I don't know any one who got the internal TNC
> working for satellite packet operation.
>
> 73s, Erich, DK1TB
>
> Am 06.05.2018 um 20:01 schrieb Vincenzo Mone:
>
>> Hi Folks,
>>
>>
>> Today I got the brilliant idea of ??wanting to receive the packet with my
>> Kenwood TS-2000X with its internal TNC while the SatPC
>>
>> program was loaded but I noticed that launching the terminal program I
>> had the error of the behavior in when already in use.
>>
>> Now my question is: is there anyone with the same configuration as I was
>> able to receive and decode the packet while using
>>
>> the SatPc program?
>>
>> What if you want to interact with the ISS while it is in packet mode?
>> Any help will be really appreciated
>>
>>
>>
>>
>> 73 de Enzo IK8OZV
>> EasyLog 5 BetaTester
>> EasyLog PDA BetaTester
>> WinBollet BetaTester
>> D.C.I. CheckPoint Regione Campania
>> Skype: ik8ozv8520
>>
>>
>>
>>
>> *******************************************
>> ****** GSM +39 328 7110193 ******
>> ***** SMS +39 328 7110193 *****
>> *******************************************
>>
>>
>> _______________________________________________
>> Sent viaAMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>> Subscription settings:http://www.amsat.org/mailman/listinfo/amsat-bb
>>
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
> ---
> This email has been checked for viruses by AVG.
> http://www.avg.com
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 6
Date: Sun, 06 May 2018 23:38:15 -0400
From: Carlos Alberto <behique@???????.???.??>
To: amsat bb <amsat-bb@?????.???>
Subject: [amsat-bb] Asking about FM sats frequency
Message-ID: <20180506233815.19177h1g8pyqojdz@???????.???.??>
Content-Type: text/plain; charset=ISO-8859-1; DelSp="Yes";
format="flowed"
Hi,
I'm programming the channels of a 2m/70cm HT and I need to update the
FM frequency of sats both in 2m and 70 cm.
I know there are new birds and I don't know the freq.
Thank's in advance.
Carlos A. Santamaria
CO2JC
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
--
Este mensaje le ha llegado mediante el servicio de correo electronico que
ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema
Nacional de Salud. La persona que envia este correo asume el compromiso de
usar el servicio a tales fines y cumplir con las regulaciones establecidas
Infomed: http://www.sld.cu/
------------------------------
Message: 7
Date: Mon, 7 May 2018 07:25:30 -0400
From: Roy Dean <royldean@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] Asking about FM sats frequency
Message-ID:
<CADGPg2tYY8ZKuy5=+rDSCULV5-rpLJOxk5N8dU7qTN7zung=PA@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
https://www.amsat.org/fm-satellite-frequency-summary/
--Roy
K3RLD
>
> Hi, I'm programming the channels of a 2m/70cm HT and I need to update the
> FM frequency of sats both in 2m and 70 cm. I know there are new birds and
> I don't know the freq. Thank's in advance. Carlos A. Santamaria
> CO2JC
------------------------------
Message: 8
Date: Mon, 7 May 2018 13:24:35 +0000 (UTC)
From: Robert Switzer <rs2atmink@?????.???>
To: amsat-bb@?????.???? Roy Dean <royldean@?????.???>
Subject: Re: [amsat-bb] Asking about FM sats frequency
Message-ID: <2090261378.656031.1525699475354@????.?????.???>
Content-Type: text/plain; charset=UTF-8
What would be really helpful is for the amsat summary page to be updated
with a table of common AOS/TCA/LOS frequencies for each Sat.
I don't have my notes but IIRC there were 1 or 2 (SO-50 an/or perhaps
AO-85?) which were off from the original published center freq's (then again,
perhaps I'm not remembering correctly).
Rob KA2CZU
On Monday, May 7, 2018, 7:26:13 AM EDT, Roy Dean <royldean@?????.???>
wrote:
https://www.amsat.org/fm-satellite-frequency-summary/
--Roy
K3RLD
>
> Hi, I'm programming the channels of a 2m/70cm HT and I need to update the
> FM frequency of sats both in 2m and 70 cm. I know there are new birds and
> I don't know the freq. Thank's in advance. Carlos A. Santamaria
> CO2JC
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 9
Date: Mon, 7 May 2018 14:56:33 +0000
From: John Geiger <af5cc2@?????.???>
To: Robert Switzer <robert_switzer@???.???>, Robert Switzer
<rs2atmink@?????.???>
Cc: AMSAT <amsat-bb@?????.???>, Roy Dean <royldean@?????.???>
Subject: Re: [amsat-bb] Asking about FM sats frequency
Message-ID:
<CAHC1P2_9TBJXUQ5cT_k3GUEa9t=x8zC2+NvvHShREeATy1F0xA@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
The published SO50 frequencies are ok, but AO85 is off a bit, but I can't
remember in which direction.
73 John AF5CC
On Mon, May 7, 2018 at 1:24 PM, Robert Switzer via AMSAT-BB <
amsat-bb@?????.???> wrote:
> What would be really helpful is for the amsat summary page to be updated
> with a table of common AOS/TCA/LOS frequencies for each Sat.
>
> I don't have my notes but IIRC there were 1 or 2 (SO-50 an/or perhaps
> AO-85?) which were off from the original published center freq's (then
> again,
> perhaps I'm not remembering correctly).
>
> Rob KA2CZU
>
>
> On Monday, May 7, 2018, 7:26:13 AM EDT, Roy Dean <royldean@?????.???>
> wrote:
>
> https://www.amsat.org/fm-satellite-frequency-summary/
>
> --Roy
> K3RLD
>
>
>
> >
> > Hi, I'm programming the channels of a 2m/70cm HT and I need to update the
> > FM frequency of sats both in 2m and 70 cm. I know there are new birds and
> > I don't know the freq. Thank's in advance. Carlos A. Santamaria
> > CO2JC
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 10
Date: Mon, 7 May 2018 11:38:37 -0400
From: Andrew Glasbrenner <glasbrenner@??????????.???>
To: John Geiger <af5cc2@?????.???>
Cc: AMSAT <amsat-bb@?????.???>, Robert Switzer
<robert_switzer@???.???>, Roy Dean <royldean@?????.???>
Subject: Re: [amsat-bb] Asking about FM sats frequency
Message-ID: <DE81C31F-6525-4755-809F-579F900FF95E@??????????.???>
Content-Type: text/plain; charset=us-ascii
The frequencies on that page are the correct ones.
73, Drew KO4MA
> On May 7, 2018, at 10:56 AM, John Geiger <af5cc2@?????.???> wrote:
>
> The published SO50 frequencies are ok, but AO85 is off a bit, but I can't
> remember in which direction.
>
> 73 John AF5CC
>
> On Mon, May 7, 2018 at 1:24 PM, Robert Switzer via AMSAT-BB <
> amsat-bb@?????.???> wrote:
>
>> What would be really helpful is for the amsat summary page to be updated
>> with a table of common AOS/TCA/LOS frequencies for each Sat.
>>
>> I don't have my notes but IIRC there were 1 or 2 (SO-50 an/or perhaps
>> AO-85?) which were off from the original published center freq's (then
>> again,
>> perhaps I'm not remembering correctly).
>>
>> Rob KA2CZU
>>
>>
>> On Monday, May 7, 2018, 7:26:13 AM EDT, Roy Dean <royldean@?????.???>
>> wrote:
>>
>> https://www.amsat.org/fm-satellite-frequency-summary/
>>
>> --Roy
>> K3RLD
>>
>>
>>
>>>
>>> Hi, I'm programming the channels of a 2m/70cm HT and I need to update the
>>> FM frequency of sats both in 2m and 70 cm. I know there are new birds and
>>> I don't know the freq. Thank's in advance. Carlos A. Santamaria
>>> CO2JC
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership. Opinions
>> expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>>
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership. Opinions
>> expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 11
Date: Mon, 7 May 2018 12:49:38 -0300
From: Pedro Converso <pconver@?????.???>
To: Carlos Alberto <behique@???????.???.??>
Cc: amsat bb <amsat-bb@?????.???>
Subject: Re: [amsat-bb] Asking about FM sats frequency
Message-ID:
<CANTZqKnD=RqYxcp=bZNkW+RLgrVEvOnBPcSQ0FffXw-8sFfC_Q@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Hello,
I've set on memories for Yaesu FT-897 and Baofeng UV-5R for FM Sats:
SATID Downlin Up-link STone
SO50E 436.802 145.847 88.5
SO501 436.802 145.847 67.0
SO502 436.794 145.850 67.0
SO503 436.786 145.853 67.0
AO851 145.980 435.180 67.0
AO852 145.977 435.172 67.0
AO853 145.974 435.164 67.0
AO911 145.964 435.242 67.0
AO912 145.961 435.250 67.0
AO913 145.858 435.258 67.0
AO921 145.883 435.342 67.0
AO922 145.880 435.350 67.0
AO923 145.877 435.358 67.0
Using http://amsat.org.ar/pass to see when the satellite will show, using
xxx1 for AOS, xxx2 for TCA and xxx3 for LOS.
So far success on contacts, hope is useful, good luck !.
73, LU7ABF, Pedro
On Mon, May 7, 2018 at 12:38 AM, Carlos Alberto <behique@???????.???.??>
wrote:
> Hi,
>
> I'm programming the channels of a 2m/70cm HT and I need to update the FM
> frequency of sats both in 2m and 70 cm.
>
> I know there are new birds and I don't know the freq.
>
> Thank's in advance.
>
>
> Carlos A. Santamaria
> CO2JC
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
>
>
> --
> Este mensaje le ha llegado mediante el servicio de correo electronico que
> ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema
> Nacional de Salud. La persona que envia este correo asume el compromiso de
> usar el servicio a tales fines y cumplir con las regulaciones establecidas
>
> Infomed: http://www.sld.cu/
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 12
Date: Mon, 7 May 2018 13:02:12 -0300
From: Pedro Converso <pconver@?????.???>
To: Carlos Alberto <behique@???????.???.??>
Cc: amsat bb <amsat-bb@?????.???>
Subject: Re: [amsat-bb] Asking about FM sats frequency
Message-ID:
<CANTZqKnCsmh3H8q9HRwOR1jErrFA9TCD5BdEh6kR0nfAGWjKvg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Hello,
I've set on memories for Yaesu FT-897 and Baofeng UV-5R for FM Sats:
SATID Downlin Up-link STone
SO50E 436.802 145.847 77.4 (Corrected Stone)
SO501 436.802 145.847 67.0
SO502 436.794 145.850 67.0
SO503 436.786 145.853 67.0
AO851 145.980 435.180 67.0
AO852 145.977 435.172 67.0
AO853 145.974 435.164 67.0
AO911 145.964 435.242 67.0
AO912 145.961 435.250 67.0
AO913 145.858 435.258 67.0
AO921 145.883 435.342 67.0
AO922 145.880 435.350 67.0
AO923 145.877 435.358 67.0
Using http://amsat.org.ar/pass to see when the satellite will show, using
xxx1 for AOS, xxx2 for TCA and xxx3 for LOS.
So far success on contacts, hope is useful.
73, LU7ABF, Pedro
On Mon, May 7, 2018 at 12:38 AM, Carlos Alberto <behique@???????.???.??>
wrote:
> Hi,
>
> I'm programming the channels of a 2m/70cm HT and I need to update the FM
> frequency of sats both in 2m and 70 cm.
>
> I know there are new birds and I don't know the freq.
>
> Thank's in advance.
>
>
> Carlos A. Santamaria
> CO2JC
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
>
>
> --
> Este mensaje le ha llegado mediante el servicio de correo electronico que
> ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema
> Nacional de Salud. La persona que envia este correo asume el compromiso de
> usar el servicio a tales fines y cumplir con las regulaciones establecidas
>
> Infomed: http://www.sld.cu/
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@?????.???.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 13, Issue 157
*****************************************
Read previous mail | Read next mail
| |
