| |
CX2SA > SATDIG 17.11.18 18:29l 830 Lines 23968 Bytes #999 (0) @ WW
BID : AMSATBB13381
Read: GUEST
Subj: AMSAT-BB-digest V13 381
Path: IW8PGT<IR2UBX<IW2OHX<UA6ADV<CX2SA
Sent: 181117/1626Z @:CX2SA.SAL.URY.SOAM #:58453 [Salto] FBB7.00e $:AMSATBB13381
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Re: JY1SAT Sat Warehouse (planophore@???.???
2. Re: JY1SAT Sat Warehouse (Graham Shirville)
3. South Texas Grid Rove (Glenn Miller - AA5PK)
4. Re: JY1SAT Sat Warehouse (Hasan al-Basri)
5. FUNcube Warehouse Testing (David Johnson)
6. Re: South Texas Grid Rove (Jack KC7MG)
7. EN63 mini rove Nov 17 (aa8ch@???.????
8. Up and down converters (Gopal Madhavan)
9. Re: PP2RON <> GH52dx (Ronnan Werneck)
10. Re: Up and down converters (Daniel Cussen)
11. Nayif-1 Packets being rerouted to new Warehouse (David Johnson)
12. Re: Up and down converters (Fred Dawson)
13. FUNcube 1 Data warehouse disruption (David Johnson)
14. Re: Up and down converters (Nitin Muttin)
----------------------------------------------------------------------
Message: 1
Date: Fri, 16 Nov 2018 17:17:29 +0000
From: <planophore@???.??>
To: "Hasan al-Basri" <hbasri.schiers6@?????.???>,
"graham@?????????.???? <graham@?????????.???>
Cc: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: Re: [amsat-bb] JY1SAT Sat Warehouse
Message-ID: <201811161717.wAGHHTBo012746@??????.???.??>
Content-Type: text/plain; charset=ISO-8859-1
Ok, just so that I am clear - I can run one dashboard (i.e funcube
dashboard) and it will decode FunCube, NAYIF-1 and JY1SAT telemetry
correctly identifying the source satellite and send that data to the
warehouse and the correct telemetry for the correct satellite get put in
the right place?
I have just started playing around with decoding FunCube and NAYIF
telemtry, and lookin forward to JY1SAT and have been trying to devise a
plan on how to do all three at the same time.
I was going to run one instance of each of the dashboards and schedule a
receiver to change frequencies for a specific satellite when in view but
it sounds like I can just one dashboard and feed it with my one receiver
with it's scheduled frequency changes.
Is that correct?
cheers, Graham ve3gtc FN25 near Ottawa Canada
On 11/16/2018, "Hasan al-Basri" <hbasri.schiers6@?????.???> wrote:
>Graham,
>I can't thank you enough. I now have 3 dashboards installed, FC-1, Nayaf-1
>and JY1-Sat. I can run all at the same time, and I can also run 3 receivers
>at a time, all feeding their audio streams to the software (SDRs are soooo
>nice)
>
>Awaiting my 1st nayaf-1 tlme pass (3 min AOS). Signals were quite strong
>earlier, but I didn't have the right decoder software up yet.
>
>Thanks again.
>73, N0AN
>Hasan
>
>
>On Fri, Nov 16, 2018 at 10:27 AM Graham Shirville <graham@?????????.???>
>wrote:
>
>> Hi Hasan,
>>
>> Yes you site id authentication can be the same for all dashboards,
>> currently FC1 and Nayif. You can also use the same id for the new ESEO
>> and JY1SAT dashboard from next week (hopefully).
>>
>> If you are running the FC1 dashboard and it receives and decodes data
>> from Nayif- it will send these to the Data Warehouse automatically. You
>> will see the bottom RH count going up beyond the LH number. Youcan,
>> usually run both dashbaords at the saem time if you wish to display
>> everything!
>>
>> 73
>>
>> Graham
>>
>>
>> On 16/11/2018 16:07, Hasan al-Basri wrote:
>> > I've been decoding and uploading AO-73 data with the Funcube-1 Dashboard.
>> >
>> > I just downloaded and installed JY1-Sat Dashboard.
>> >
>> > IAre the Site ID (my call) and the Auth code the same for both upload
>> sites?
>> >
>> > I should have a pass of EO-88 in about 30 minutes. Is there any
>> indication
>> > from the software that my data is being accepted at the site, based on
>> the
>> > same ID and Auth as for AO-73 ?
>> >
>> > TIA,
>> > 73, N0AN
>> > Hasan
>> > _______________________________________________
>> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> > to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> > are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> > Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>>
>>
>_______________________________________________
>Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>to all interested persons worldwide without requiring membership. Opinions
expressed
>are solely those of the author, and do not reflect the official views of
AMSAT-NA.
>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
>
------------------------------
Message: 2
Date: Fri, 16 Nov 2018 17:46:37 +0000
From: Graham Shirville <graham@?????????.???>
To: planophore@???.??? Hasan al-Basri <hbasri.schiers6@?????.???>
Cc: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: Re: [amsat-bb] JY1SAT Sat Warehouse
Message-ID: <30fdc5e6-5494-ff0e-32cf-8b1fe0c349aa@?????????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
Just rushing for plane but yes either way will work ok but iif you want
to display the tlm from each then you need to run the three dashboards..
thanks
Graham
On 16/11/2018 17:17, planophore@???.?? wrote:
> Ok, just so that I am clear - I can run one dashboard (i.e funcube
> dashboard) and it will decode FunCube, NAYIF-1 and JY1SAT telemetry
> correctly identifying the source satellite and send that data to the
> warehouse and the correct telemetry for the correct satellite get put in
> the right place?
>
> I have just started playing around with decoding FunCube and NAYIF
> telemtry, and lookin forward to JY1SAT and have been trying to devise a
> plan on how to do all three at the same time.
>
> I was going to run one instance of each of the dashboards and schedule a
> receiver to change frequencies for a specific satellite when in view but
> it sounds like I can just one dashboard and feed it with my one receiver
> with it's scheduled frequency changes.
>
> Is that correct?
>
> cheers, Graham ve3gtc FN25 near Ottawa Canada
>
>
>
> On 11/16/2018, "Hasan al-Basri" <hbasri.schiers6@?????.???> wrote:
>
>> Graham,
>> I can't thank you enough. I now have 3 dashboards installed, FC-1, Nayaf-1
>> and JY1-Sat. I can run all at the same time, and I can also run 3 receivers
>> at a time, all feeding their audio streams to the software (SDRs are soooo
>> nice)
>>
>> Awaiting my 1st nayaf-1 tlme pass (3 min AOS). Signals were quite strong
>> earlier, but I didn't have the right decoder software up yet.
>>
>> Thanks again.
>> 73, N0AN
>> Hasan
>>
>>
>> On Fri, Nov 16, 2018 at 10:27 AM Graham Shirville <graham@?????????.???>
>> wrote:
>>
>>> Hi Hasan,
>>>
>>> Yes you site id authentication can be the same for all dashboards,
>>> currently FC1 and Nayif. You can also use the same id for the new ESEO
>>> and JY1SAT dashboard from next week (hopefully).
>>>
>>> If you are running the FC1 dashboard and it receives and decodes data
>>> from Nayif- it will send these to the Data Warehouse automatically. You
>>> will see the bottom RH count going up beyond the LH number. Youcan,
>>> usually run both dashbaords at the saem time if you wish to display
>>> everything!
>>>
>>> 73
>>>
>>> Graham
>>>
>>>
>>> On 16/11/2018 16:07, Hasan al-Basri wrote:
>>>> I've been decoding and uploading AO-73 data with the Funcube-1 Dashboard.
>>>>
>>>> I just downloaded and installed JY1-Sat Dashboard.
>>>>
>>>> IAre the Site ID (my call) and the Auth code the same for both upload
>>> sites?
>>>> I should have a pass of EO-88 in about 30 minutes. Is there any
>>> indication
>>>> from the software that my data is being accepted at the site, based on
>>> the
>>>> same ID and Auth as for AO-73 ?
>>>>
>>>> TIA,
>>>> 73, N0AN
>>>> Hasan
>>>> _______________________________________________
>>>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>>>> to all interested persons worldwide without requiring membership.
>>> Opinions expressed
>>>> are solely those of the author, and do not reflect the official views of
>>> AMSAT-NA.
>>>> Not an AMSAT-NA member? Join now to support the amateur satellite
>>> program!
>>>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>>>
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
Opinions expressed
>> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>>
>>
------------------------------
Message: 3
Date: Fri, 16 Nov 2018 09:51:28 -0600
From: "Glenn Miller - AA5PK" <aa5pk@??????????.???>
To: "AMSAT BBS" <amsat-bb@?????.???>
Subject: [amsat-bb] South Texas Grid Rove
Message-ID: <16108B9D2D734CFDA645855AFB1625B8@???????>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
My rove to the south Texas grids was a success. San Angelo to Corpus
Christi (EL17) to Brownsville (EL15) to Laredo (EL07)
to San Antonio (EL09) and back home to San Angelo. Total of 1309 miles.
The weather was cold (record cold for south Texas), drizzly and windy in
EL17 and just cold and windy in EL15, but the
weather improved by the time we got to EL07.
I activated grids EL06, 07, 08, 09, 15, 16, 17 and 18 logging 138 QSOs.
All QSOs have been uploaded to LoTW. I had a few brief recording dropouts
on two of the passes, but I think I got everyone.
If you don't see a match in LoTW, email me with the details and I will check
the recording.
Anyone desiring a hard copy QSL card can email me and I'll send out one of
my rover cards. No need for an SASE.
73
Glenn
AA5PK
------------------------------
Message: 4
Date: Fri, 16 Nov 2018 15:13:58 -0600
From: Hasan al-Basri <hbasri.schiers6@?????.???>
To: graham@?????????.???
Cc: amsat-bb@?????.???
Subject: Re: [amsat-bb] JY1SAT Sat Warehouse
Message-ID:
<CAM4UQf1UFD4wM4Rj_tO1+iJuY8dieoQv5ofs7PdHUs7v7xdoiw@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Got it.
Hasan
On Fri, Nov 16, 2018 at 11:46 AM Graham Shirville <graham@?????????.???>
wrote:
> Just rushing for plane but yes either way will work ok but iif you want
> to display the tlm from each then you need to run the three dashboards..
>
>
> thanks
>
> Graham
>
>
> On 16/11/2018 17:17, planophore@???.?? wrote:
> > Ok, just so that I am clear - I can run one dashboard (i.e funcube
> > dashboard) and it will decode FunCube, NAYIF-1 and JY1SAT telemetry
> > correctly identifying the source satellite and send that data to the
> > warehouse and the correct telemetry for the correct satellite get put in
> > the right place?
> >
> > I have just started playing around with decoding FunCube and NAYIF
> > telemtry, and lookin forward to JY1SAT and have been trying to devise a
> > plan on how to do all three at the same time.
> >
> > I was going to run one instance of each of the dashboards and schedule a
> > receiver to change frequencies for a specific satellite when in view but
> > it sounds like I can just one dashboard and feed it with my one receiver
> > with it's scheduled frequency changes.
> >
> > Is that correct?
> >
> > cheers, Graham ve3gtc FN25 near Ottawa Canada
> >
> >
> >
> > On 11/16/2018, "Hasan al-Basri" <hbasri.schiers6@?????.???> wrote:
> >
> >> Graham,
> >> I can't thank you enough. I now have 3 dashboards installed, FC-1,
> Nayaf-1
> >> and JY1-Sat. I can run all at the same time, and I can also run 3
> receivers
> >> at a time, all feeding their audio streams to the software (SDRs are
> soooo
> >> nice)
> >>
> >> Awaiting my 1st nayaf-1 tlme pass (3 min AOS). Signals were quite strong
> >> earlier, but I didn't have the right decoder software up yet.
> >>
> >> Thanks again.
> >> 73, N0AN
> >> Hasan
> >>
> >>
> >> On Fri, Nov 16, 2018 at 10:27 AM Graham Shirville <graham@?????????.???
> >
> >> wrote:
> >>
> >>> Hi Hasan,
> >>>
> >>> Yes you site id authentication can be the same for all dashboards,
> >>> currently FC1 and Nayif. You can also use the same id for the new ESEO
> >>> and JY1SAT dashboard from next week (hopefully).
> >>>
> >>> If you are running the FC1 dashboard and it receives and decodes data
> >>> from Nayif- it will send these to the Data Warehouse automatically. You
> >>> will see the bottom RH count going up beyond the LH number. Youcan,
> >>> usually run both dashbaords at the saem time if you wish to display
> >>> everything!
> >>>
> >>> 73
> >>>
> >>> Graham
> >>>
> >>>
> >>> On 16/11/2018 16:07, Hasan al-Basri wrote:
> >>>> I've been decoding and uploading AO-73 data with the Funcube-1
> Dashboard.
> >>>>
> >>>> I just downloaded and installed JY1-Sat Dashboard.
> >>>>
> >>>> IAre the Site ID (my call) and the Auth code the same for both upload
> >>> sites?
> >>>> I should have a pass of EO-88 in about 30 minutes. Is there any
> >>> indication
> >>>> from the software that my data is being accepted at the site, based on
> >>> the
> >>>> same ID and Auth as for AO-73 ?
> >>>>
> >>>> TIA,
> >>>> 73, N0AN
> >>>> Hasan
> >>>> _______________________________________________
> >>>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> >>>> to all interested persons worldwide without requiring membership.
> >>> Opinions expressed
> >>>> are solely those of the author, and do not reflect the official views
> of
> >>> AMSAT-NA.
> >>>> Not an AMSAT-NA member? Join now to support the amateur satellite
> >>> program!
> >>>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >>>
> >> _______________________________________________
> >> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> >> to all interested persons worldwide without requiring membership.
> Opinions expressed
> >> are solely those of the author, and do not reflect the official views
> of AMSAT-NA.
> >> Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> >> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >>
> >>
>
>
------------------------------
Message: 5
Date: Fri, 16 Nov 2018 23:32:30 +0000
From: David Johnson <dave@?????.??.??>
To: amsat-bb <amsat-bb@?????.???>
Subject: [amsat-bb] FUNcube Warehouse Testing
Message-ID: <788874CA-4846-400A-9574-671087CE341C@?????.??.??>
Content-Type: text/plain; charset=us-ascii
Hi
I am going to do a quick change to the Apache config on data.amsat-uk.org
(the Nayif1 server) tomorrow to point it to data2 just to check the load for
a couple of hours.
I will pump back any data we get into the existing warehouse along with any
points accrued.
Many thanks for your patience in helping to get JY1Sat and ESEO data right
first time.
As with FUNcube, UKube and Nayif we will know who uploads the Epoch packet :-)
Dave, G4DPZ
------------------------------
Message: 6
Date: Fri, 16 Nov 2018 16:56:24 -0700
From: "Jack KC7MG" <ingejack@???.???>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: Re: [amsat-bb] South Texas Grid Rove
Message-ID:
<20181116235624.ULHJ4163.fed1rmfepo203.cox.net@?????????????.???.???>
Content-Type: text/plain; charset="utf-8"
Glenn: time for a new car after all those roving miles. Thanks for the new
grids 73 JACK KC7MG
Sent from Mail for Windows 10
------------------------------
Message: 7
Date: Sat, 17 Nov 2018 00:32:36 +0000 (UTC)
From: <aa8ch@???.???>
To: amsat-bb@?????.???
Subject: [amsat-bb] EN63 mini rove Nov 17
Message-ID: <1957527720.1973071.1542414756713@????.?????.???>
Content-Type: text/plain; charset=UTF-8
HiAnyone needing EN63 confirmed in LOTW I'll be on 2 passes Saturday
November 17th, 2018.??
AO91 1750UTC
AO85 1839UTC
QSOs as always will be uploaded to LOTW.? Shoot me an email if you need it
and I'll listen for you
73Chris AA8CH
------------------------------
Message: 8
Date: Sat, 17 Nov 2018 11:41:36 +0530
From: "Gopal Madhavan" <gopal@?????????.???>
To: "AMSAT BB" <amsat-bb@?????.???>
Subject: [amsat-bb] Up and down converters
Message-ID: <013301d47e3c$6bee8bc0$43cba340$@?????????.???>
Content-Type: text/plain; charset="us-ascii"
Is any information available for up and down converters for using VHF and
UHF radios to work the new Geo Stationary satellite?
Gopal
Gopal Madhavan VU2GMN / M0GDB
6, Shreyas Apartments
128 Greenways Road
Chennai- 600 028, India
Mob: + 91 94440 18452
------------------------------
Message: 9
Date: Sat, 17 Nov 2018 10:57:32 -0300
From: Ronnan Werneck <ronnan@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] PP2RON <> GH52dx
Message-ID:
<CAP+GScXFPkBMtOdP=9gnBEz0TeqmdQkJO5pShd+u6Qrkb-1Nfg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Yesterday I had good return on AO-7 until 2? of elevation over USA covering
the east coast.
Unfortunatelly nobody was there to answer my calls.
I will try again today.
Hopefully I can find a satellite operator there.
73
Ron
PP2RON
GH52dx
Em sex, 16 de nov de 2018 14:07, Ronnan Werneck <ronnan@?????.??? escreveu:
> Hi there,
>
> I'm operating from my farm QTH (GH52dx) and I'm looking for USA east cost
> stations on next pass for North America, starting around 19:42UTC.
>
> I'll be here untill sunday QRV also on FO-29 when passes are good for USA.
>
> Pse QSP.
>
> 73
>
> Ron
> PP2RON
>
>
>
------------------------------
Message: 10
Date: Sat, 17 Nov 2018 13:38:17 +0000
From: Daniel Cussen <dan@????.???>
To: Gopal Madhavan <gopal@?????????.???>
Cc: amsat-bb <amsat-bb@?????.???>
Subject: Re: [amsat-bb] Up and down converters
Message-ID:
<CAF3DnKiBorkCD106=9XdE-vuctVnr+fMcx6-uZak0EbYo82pAA@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
No price but details here:
https://shop.kuhne-electronic.de/kuhne/de/onlineshop/EsHail-2/
There may be other kits available
On Sat, 17 Nov 2018 12:44 Gopal Madhavan, <gopal@?????????.???> wrote:
> Is any information available for up and down converters for using VHF and
> UHF radios to work the new Geo Stationary satellite?
>
>
>
> Gopal
>
>
>
> Gopal Madhavan VU2GMN / M0GDB
>
> 6, Shreyas Apartments
>
> 128 Greenways Road
>
> Chennai- 600 028, India
>
> Mob: + 91 94440 18452
>
>
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 11
Date: Sat, 17 Nov 2018 14:03:30 +0000
From: David Johnson <dave@?????.??.??>
To: amsat-bb <amsat-bb@?????.???>
Subject: [amsat-bb] Nayif-1 Packets being rerouted to new Warehouse
Message-ID: <F379F229-A589-423F-9ED7-5E5737E514EB@?????.??.??>
Content-Type: text/plain; charset=us-ascii
Hi,
I am testing the redirect for a hour or so.
Your scores on the existing warehouse will not increment (i will fix up
later) but you can see your scores and the data at:
http://data2.amsat-uk.org/ranking
and
http://data2.amsat-uk.org/ui/nayif1
73
- Dave, G4DPZ
------------------------------
Message: 12
Date: Sat, 17 Nov 2018 14:15:25 +0000
From: Fred Dawson <fred.wp.dawson@??????????.???>
To: dan@????.???
Cc: amsat-bb@?????.???? Gopal Madhavan <gopal@?????????.???>
Subject: Re: [amsat-bb] Up and down converters
Message-ID:
<CAAO8GjaOQ7pAbaRYmudRBZhxz3MtSC1-zq6T1JrEV1VbgCaFsQ@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
799,00 ?
On Sat, 17 Nov 2018 at 13:39, Daniel Cussen <dan@????.???> wrote:
> No price but details here:
>
> https://shop.kuhne-electronic.de/kuhne/de/onlineshop/EsHail-2/
>
> There may be other kits available
>
> On Sat, 17 Nov 2018 12:44 Gopal Madhavan, <gopal@?????????.???> wrote:
>
> > Is any information available for up and down converters for using VHF and
> > UHF radios to work the new Geo Stationary satellite?
> >
> >
> >
> > Gopal
> >
> >
> >
> > Gopal Madhavan VU2GMN / M0GDB
> >
> > 6, Shreyas Apartments
> >
> > 128 Greenways Road
> >
> > Chennai- 600 028, India
> >
> > Mob: + 91 94440 18452
> >
> >
> >
> > _______________________________________________
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions
> > expressed
> > are solely those of the author, and do not reflect the official views of
> > AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Fred Dawson
http://freds-take-on-the-world.blogspot.com/
http://www.fred-dawson.pwp.blueyonder.co.uk/
------------------------------
Message: 13
Date: Sat, 17 Nov 2018 15:22:22 +0000
From: David Johnson <dave@?????.??.??>
To: amsat-bb <amsat-bb@?????.???>
Subject: [amsat-bb] FUNcube 1 Data warehouse disruption
Message-ID: <34D74AD2-2898-4EFC-805C-E5DD1C27315C@?????.??.??>
Content-Type: text/plain; charset=us-ascii
Hi,
My apologies but I need to capture some frames from FC1 so there is a
redirect going on for about 30 minutes.
Will switch it back later (scores will be amended appropriately)
73
- Dave, G4DPZ
------------------------------
Message: 14
Date: Sat, 17 Nov 2018 16:22:05 +0000 (UTC)
From: Nitin Muttin <vu3tyg@?????.??.??>
To: AMSAT BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] Up and down converters
Message-ID: <2058933141.1928208.1542471725543@????.?????.???>
Content-Type: text/plain; charset=UTF-8
Hi Gopal,
For the downlink for es'hail 2 is on 10.5GHz for which DTH PLL STB + DTG
dish can be used with an SDR. For the uplink on 2.4 Ghz? we do not have the
allocation in VU for satellite service.
Hence I will be more on the listening mode using DTH STB + SDR.
Commercial products are available
https://shop.kuhne-electronic.de/kuhne/de/onlineshop/EsHail-2/
73
Nitin [VU3TYG]
On Saturday, 17 November, 2018, 6:14:50 PM IST, Gopal
Madhavan <gopal@?????????.???> wrote:
Is any information available for up and down converters for
using VHF and
UHF radios to work the new Geo Stationary satellite?
Gopal
Gopal Madhavan VU2GMN / M0GDB
6, Shreyas Apartments
128 Greenways Road
Chennai- 600 028, India
Mob: + 91 94440 18452
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Virus-free. www.avg.com
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@?????.???.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 13, Issue 381
*****************************************
Read previous mail | Read next mail
| |
