| |
CX2SA > SATDIG 04.12.18 00:04l 668 Lines 18766 Bytes #999 (0) @ WW
BID : AMSATBB13398
Read: GUEST
Subj: AMSAT-BB-digest V13 398
Path: IW8PGT<IR2UBX<OK0NBR<OK2PEN<CX2SA
Sent: 181203/2201Z @:CX2SA.SAL.URY.SOAM #:59436 [Salto] FBB7.00e $:AMSATBB13398
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Re: FUNcube Warehouse Registrations (Hasan al-Basri)
2. Re: AO-85 (Jean Marc Momple)
3. TLEs for todays Dec 3 Launch? (christy hunter)
4. Fox-1Cliff Launch Coverage (Paul Stoetzer)
5. Re: TLEs for todays Dec 3 Launch? (Paul Stoetzer)
6. Re: TLEs for todays Dec 3 Launch? (Ray Hoad)
7. Re: Fox-1Cliff Launch Coverage (Roy Dean)
8. ITASAT-1 (Edson W. R. Pereira)
9. Clearing out the shack (Angelo Glorioso)
10. Re: ITASAT-1 (Loren M. Lang)
11. Yaesu G-5500 and Labjack Piggyback (Bob Hammond)
12. AO-91 SQF file (BOB JOHNSON)
13. For Sale (Angelo Glorioso)
14. First Post Launch TLE for Fox-1Cliff (Ray Hoad)
15. Re: Fox-1Cliff Launch Coverage (Chris Pohlad-Thomas)
16. Re: TLEs for todays Dec 3 Launch? (Ray Hoad)
----------------------------------------------------------------------
Message: 1
Date: Mon, 3 Dec 2018 07:42:43 -0600
From: Hasan al-Basri <hbasri.schiers6@?????.???>
To: dave@?????.??.??
Cc: amsat-bb@?????.???
Subject: Re: [amsat-bb] FUNcube Warehouse Registrations
Message-ID:
<CAM4UQf2MWC+diCn_bkuROZiDv+DugKghzDkpyE+UUFSvybwGKw@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Hmmmm...now it seems to have accepted the data...must have been a temporary
glitch of some time. Will keep an eye on it for next run
73, N0AN
Hasan
On Mon, Dec 3, 2018 at 7:38 AM Hasan al-Basri <hbasri.schiers6@?????.???>
wrote:
> Dave,
> I'm very confused (again). I've been uploading successfully for many weeks
> for AO-73 to:
>
> http://data.funcube.org.uk
>
> This morning, the counts on :
>
> http://warehouse.funcube.org.uk/ranking.html?satelliteId=2
>
> are not incrementing, as if I'm no longer uploading?
>
> I went to the URL in your message and tried to "register" (even though
> I've been registered for months)..and it told me "already registered"
>
> That's two runs of captured data lost.
>
> I've had no issues uploading for AO-73 and EO-88 until now. I haven't
> checked EO-88
>
> Perhaps the site I've been uploading to is down, or has it been changed?
>
> Please give me a hint :-)
>
> 73, N0AN
> Hasan
>
>
> On Sun, Dec 2, 2018 at 2:32 PM David Johnson <dave@?????.??.??> wrote:
>
>> Hi,
>>
>> While we transition to the new warehouse please register new sites at:
>>
>> http://data.amsat-uk.org/registration for NAYIF-1, JY1Sat, ESEO
>>
>> http://warehouse.funcube.org.uk/register.html?satelliteId=2 for FUNcube-1
>>
>> We will unify the registration mechanism one the launch has occurred (too
>> much to do).
>>
>> Thanks
>>
>> Dave, G4DPZ
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>>
>
------------------------------
Message: 2
Date: Mon, 3 Dec 2018 21:03:59 +0400
From: Jean Marc Momple <jean.marc.momple@?????.???>
To: Andrew Glasbrenner <glasbrenner@??????????.???>
Cc: Amsat - BBs <amsat-bb@?????.???>
Subject: Re: [amsat-bb] AO-85
Message-ID: <7CE0CA25-48B2-4276-AD1F-BFEE6C2B686A@?????.???>
Content-Type: text/plain; charset=us-ascii
Andrew,
Just a feedback.
This evening, in spite of strong signal in 3B8 no decoding of TLM from
AO-85, also seems the the carrier/frequency received was jumping a few KHz
+/- on each transmission but did not have the time to setup for precise
measurements. Also surely in safe mode as now as could not trigger the
repeater.
Hope this help.
Please let me know if the project team need sone specific measurement from
this side o the planet.
73
Jean Marc (3B8DU)
> On Dec 2, 2018, at 7:13 AM, Andrew Glasbrenner
<glasbrenner@??????????.???> wrote:
>
>
>
> AO-85 is in Safe mode while we investigate some low battery concerns.
> Repeater is off, but telemetry is needed please.
>
>
>
> 73, Drew KO4MA
>
> AMSAT VP Operations
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 3
Date: Mon, 3 Dec 2018 09:23:30 -0800
From: christy hunter <cchunter3@??????????.???>
To: amsat-bb@?????.???
Subject: [amsat-bb] TLEs for todays Dec 3 Launch?
Message-ID: <be189ad5-1c0b-c4c3-966b-a98e9e1b7258@??????????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
Any one- can we use the TLEs posted for the SSO-A? launch scheduled for
Dec 2? or need to be modified?
thanks
73
christy KB6LTY
---
This email has been checked for viruses by AVG.
https://www.avg.com
------------------------------
Message: 4
Date: Mon, 3 Dec 2018 12:26:46 -0500
From: Paul Stoetzer <n8hm@????.???>
To: AMSAT BB <amsat-bb@?????.???>
Subject: [amsat-bb] Fox-1Cliff Launch Coverage
Message-ID:
<CABzOSOo_sDQc7azBCsp90kq58Y=xtu_kHrvuwmsjiY14vL3C1Q@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Just over an hour until the Fox-1Cliff launch. Check out the AMSAT
website for preliminary TLEs, expected time of "First Veronica", a
live video stream of the launch, and a live blog of events!
https://www.amsat.org/fox-1cliff-launch-live-blog/
73,
Paul, N8HM
------------------------------
Message: 5
Date: Mon, 3 Dec 2018 12:33:44 -0500
From: Paul Stoetzer <n8hm@????.???>
To: christy hunter <cchunter3@??????????.???>
Cc: AMSAT BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] TLEs for todays Dec 3 Launch?
Message-ID:
<CABzOSOpF1fF-+YkfahBe3O14nVhkN9cevJvOs1nvoS4FwGR80Q@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Christy,
These are the current pre-launch elements:
Fox-1Cliff Prelaunch
1 99995U 18095A 18337.80354826 .00000000 00000-0 00000-0 0 16
2 99995 97.7695 46.91079 0014762 280.3890 0.8082 14.96282180 12
However, by the time it gets out to you tonight, real TLEs should be
available.
73,
Paul, N8HM
On Mon, Dec 3, 2018 at 12:25 PM christy hunter <cchunter3@??????????.???>
wrote:
>
> Any one- can we use the TLEs posted for the SSO-A launch scheduled for
> Dec 2? or need to be modified?
>
> thanks
>
> 73
>
> christy KB6LTY
>
>
> ---
> This email has been checked for viruses by AVG.
> https://www.avg.com
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 6
Date: Mon, 3 Dec 2018 11:38:02 -0600
From: "Ray Hoad" <ray.hoad@????????.???>
To: "'christy hunter'" <cchunter3@??????????.???>,
<amsat-bb@?????.???>
Subject: Re: [amsat-bb] TLEs for todays Dec 3 Launch?
Message-ID: <001e01d48b2e$f2173270$d6459750$@????????.???>
Content-Type: text/plain; charset="utf-8"
Yes, the TLE posted last night are is what you need to use.
Please note that after launch we will post post-launch TLE.
Ray Hoad
WA5QGD
AMSAT-NA Orbital Elements Manager
-----Original Message-----
From: AMSAT-BB [mailto:amsat-bb-bounces@?????.???? On Behalf Of christy hunter
Sent: Monday, December 3, 2018 11:24
To: amsat-bb@?????.???
Subject: [amsat-bb] TLEs for todays Dec 3 Launch?
Any one- can we use the TLEs posted for the SSO-A launch scheduled for
Dec 2? or need to be modified?
thanks
73
christy KB6LTY
---
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 7
Date: Mon, 3 Dec 2018 12:41:57 -0500
From: Roy Dean <royldean@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] Fox-1Cliff Launch Coverage
Message-ID:
<CADGPg2tARq=V=VAJo5p98U3wH0ExybCY5FE6aWoUUNO-OYOLSw@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Good luck to the entire Fox team!
--Roy
K3RLD
------------------------------
Message: 8
Date: Mon, 3 Dec 2018 15:52:29 -0200
From: "Edson W. R. Pereira" <ewpereira@?????.???>
To: amsat-bb@?????.???
Subject: [amsat-bb] ITASAT-1
Message-ID:
<CALNQy49WzMqxgPmFUfH9BiKKg1xfChYecxayLPgj6f6omqG5+g@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Hello everyone,
ITASAT-1, scheduled to be launched with SSO-A in about an hour, has an
amateur radio experiment implemented by AMSAT-BR (AMSAT Brazil). We would
appreciate any reception reports. You can mail any reports to itasat@???.??
ITASAT-1 will transmit AX.25 BPSK 1200 bps on 145.860 MHz
73, Edson PY2SDR
------------------------------
Message: 9
Date: Mon, 3 Dec 2018 11:47:53 -0600
From: Angelo Glorioso <aglorioso62@?????.???>
To: amsat-bb@?????.???
Subject: [amsat-bb] Clearing out the shack
Message-ID:
<CAOQSa9xsej-s6MvV6sn8ck85ygF+N_L-yTunrawH++S+VkJZCw@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
I have and Yaesu 817 for sale. It does have a new battery. I am using a
generic charger to charge the device. Both the receiver and the transmitter
working. Comes with mike, generic charger. and Antenna with 2mts/440 stub
on it. If i can locate the 6meter stub it will come with it.
I have pics if needed. I have access 450.00 plus shipping.
Angelo
------------------------------
Message: 10
Date: Mon, 3 Dec 2018 10:19:52 -0800
From: "Loren M. Lang" <penguin359@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] ITASAT-1
Message-ID:
<CACymvmed=o4S=Tmia=+UNMxD8iyEM1yeNHan_MyR7pfO+ZwSGg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Are there predicted Kepler Elements for this SAT yet?
On Mon, Dec 3, 2018 at 10:19 AM Loren M. Lang <penguin359@?????.???> wrote:
> Are there predicted Kepler Elements for this SAT yet?
>
> On Mon, Dec 3, 2018 at 9:53 AM Edson W. R. Pereira <ewpereira@?????.???>
> wrote:
>
>> Hello everyone,
>>
>> ITASAT-1, scheduled to be launched with SSO-A in about an hour, has an
>> amateur radio experiment implemented by AMSAT-BR (AMSAT Brazil). We would
>> appreciate any reception reports. You can mail any reports to
>> itasat@???.??
>>
>> ITASAT-1 will transmit AX.25 BPSK 1200 bps on 145.860 MHz
>>
>> 73, Edson PY2SDR
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>>
>
------------------------------
Message: 11
Date: Mon, 3 Dec 2018 11:34:07 -0800
From: Bob Hammond <propgrinder@?????.???>
To: amsat-bb@?????.???
Subject: [amsat-bb] Yaesu G-5500 and Labjack Piggyback
Message-ID:
<CAKoB7OrrnP-TmU+Q1VaUCochF+Ec=i34PwE4cdZiQqZCGZVxzw@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
I'm building a "piggyback" to go with my Labjack U3 and have a question
about the output of the G-5500 DIN connector.
As I understand the G-5500 manual, connecting certain pins to ground makes
the rotator move in certain directions. What I measure is about 15Vdc on
all of the "direction" pins relative to pin 8 which is ground.
Do I have something wrong with my G-5500 controller box? (not my piggback
board).
thanks,
Bob
W7OTJ
------------------------------
Message: 12
Date: Mon, 3 Dec 2018 12:42:04 -0800 (PST)
From: BOB JOHNSON <w7lrd@???????.???>
To: amsat-bb <amsat-bb@?????.???>
Subject: [amsat-bb] AO-91 SQF file
Message-ID: <947138849.79711.1543869725230@???????.???????.???>
Content-Type: text/plain; charset=UTF-8
Will someone please send me the SQF file for AO-91
Thanks
Bob W7LRD
------------------------------
Message: 13
Date: Mon, 3 Dec 2018 15:18:52 +0000
From: Angelo Glorioso <n5uxt@???????.???>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: [amsat-bb] For Sale
Message-ID:
<MWHPR22MB051225AB8B44461080E23B30EDAE0@?????????????.????????.????.???????.??
?>
Content-Type: text/plain; charset="iso-8859-1"
I have and Yaesu 817 for sale. It does have a new battery. I am using a
generic charger to charge the device. Both the receiver and the transmitter
working. Comes with mike, generic charger. and Antenna with 2mts/440 stub
on it. If i can locate the 6meter stub it will come with it.
I have pics if needed. I have access 450.00 plus shipping.
Angelo
---------------------------------------------------------
If you don't ask, you will never know!!
------------------------------
Message: 14
Date: Mon, 3 Dec 2018 15:00:07 -0600
From: "Ray Hoad" <ray.hoad@????????.???>
To: <amsat-bb@?????.???>
Subject: [amsat-bb] First Post Launch TLE for Fox-1Cliff
Message-ID: <004701d48b4b$2ca8e020$85faa060$@????????.???>
Content-Type: text/plain; charset="us-ascii"
This the first post-launch TLE for Fox-1Cliff. Thanks to Alan, WA4SCA for
generating this TLE from SpaceX data.
Fox-1Cliff Post-Launch
1 99995U 18095A 18337.80370529 .00000000 00000-0 00000-0 0 14
2 99995 97.7684 46.9569 0012665 260.4419 20.6997 14.94922885 15
Ray Hoad
WA5QGD
AMSAT-NA Orbital Elements Manager
------------------------------
Message: 15
Date: Mon, 3 Dec 2018 15:46:51 -0500
From: Chris Pohlad-Thomas <chrispohladthomas@?????.???>
To: royldean@?????.???
Cc: amsat-bb@?????.???
Subject: Re: [amsat-bb] Fox-1Cliff Launch Coverage
Message-ID:
<CAKwvPO9HoYWbcEeXdL_xWXBjRVJEn-s7fftBfTO-+otiHz3ekQ@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
I think we are all too excited by the Fox-1Cliff. We've brought the AMSAT
site down. Hah!
On Mon, Dec 3, 2018 at 12:43 PM Roy Dean <royldean@?????.???> wrote:
> Good luck to the entire Fox team!
>
> --Roy
> K3RLD
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Chris Pohlad-Thomas
about.me/chrispt
------------------------------
Message: 16
Date: Mon, 3 Dec 2018 15:54:35 -0600
From: "Ray Hoad" <ray.hoad@????????.???>
To: "'David W0DHB'" <dave@?????.???>, "'christy hunter'"
<cchunter3@??????????.???>, <amsat-bb@?????.???>
Subject: Re: [amsat-bb] TLEs for todays Dec 3 Launch?
Message-ID: <005001d48b52$c8c04550$5a40cff0$@????????.???>
Content-Type: text/plain; charset="us-ascii"
Yes. You cannot just cut and paste from the web site.
But, I you look at an old KEP bulletin, the header has the required format.
Just cut and paste the format header and realign to make it work.
Note: Make sure you match both the numbers and the SPACES.
Ray Hoad
WA5QGD
AMSAT-NA Orbital Elements Manager
-----Original Message-----
From: David W0DHB [mailto:dave@?????.????
Sent: Monday, December 3, 2018 15:10
To: 'Ray Hoad' <ray.hoad@????????.???>; 'christy hunter'
<cchunter3@??????????.???>; amsat-bb@?????.???
Subject: RE: [amsat-bb] TLEs for todays Dec 3 Launch?
Ray
It seems that if you cut and paste from the amsat web page you end up with a
TLE entry that is not formatted correctly
When pasted and SatPC32 ignores the entry.
I attempted to format correctly, but Satpc32 still ignores the entry .
Do you know when there will be updated Keps available ?
Thanks
Dave W0DHB
-----Original Message-----
From: AMSAT-BB <amsat-bb-bounces@?????.???> On Behalf Of Ray Hoad
Sent: Monday, December 3, 2018 10:38
To: 'christy hunter' <cchunter3@??????????.???>; amsat-bb@?????.???
Subject: Re: [amsat-bb] TLEs for todays Dec 3 Launch?
Yes, the TLE posted last night are is what you need to use.
Please note that after launch we will post post-launch TLE.
Ray Hoad
WA5QGD
AMSAT-NA Orbital Elements Manager
-----Original Message-----
From: AMSAT-BB [mailto:amsat-bb-bounces@?????.???? On Behalf Of christy
hunter
Sent: Monday, December 3, 2018 11:24
To: amsat-bb@?????.???
Subject: [amsat-bb] TLEs for todays Dec 3 Launch?
Any one- can we use the TLEs posted for the SSO-A launch scheduled for Dec
2? or need to be modified?
thanks
73
christy KB6LTY
---
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available to all
interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available to all
interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@?????.???.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 13, Issue 398
*****************************************
Read previous mail | Read next mail
| |
