| |
CX2SA > SATDIG 05.12.18 23:05l 669 Lines 22968 Bytes #999 (0) @ WW
BID : AMSATBB13402
Read: GUEST
Subj: AMSAT-BB-digest V13 402
Path: IW8PGT<IR2UBX<DB0RES<DB0ERF<OK0NAG<IK6ZDE<IR4U<CX2SA
Sent: 181205/2059Z @:CX2SA.SAL.URY.SOAM #:59567 [Salto] FBB7.00e $:AMSATBB13402
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Re: TLE for JY1-Sat (Scott)
2. TH-D72 (Stewart Morgan)
3. Re: Fox-1Cliff in CM98 18:44z (Ken Swaggart)
4. Tracking objects from the SSO-A launch (Nico Janssen)
5. Re: TH-D72 (John Brier)
6. Re: Tracking objects from the SSO-A launch (Nico Janssen)
7. ANS-339 AMSAT News Service Special Bulletin - Fox-1Cliff
Designated AMSAT-OSCAR 95 (AO-95) (JoAnne K9JKM)
8. Re: FoxTelem Crashes coping Fox1 Cliff (Burns Fisher)
9. Re: FoxTelem Crashes coping Fox1 Cliff (Frank)
10. Re: TLE for JY1-Sat (Julian Horn (Clara))
11. tracking Fox-1Cliff (Joe Puma)
12. Has anyone heard the Exceed Satellite? (Loren M. Lang)
13. Re: tracking Fox-1Cliff (Scott Harvey)
----------------------------------------------------------------------
Message: 1
Date: Tue, 4 Dec 2018 11:20:05 -0800
From: Scott <ka7fvv@?????.???>
To: Chris Pohlad-Thomas <chrispohladthomas@?????.???>
Cc: amsat-bb@?????.???
Subject: Re: [amsat-bb] TLE for JY1-Sat
Message-ID: <ED4E7FD7-8D8F-4E09-AFB5-39B1F5C59022@?????.???>
Content-Type: text/plain; charset=us-ascii
In the New-TLE element set use 2018-099A works for Fox-1C. I have not tried
to track JY1Sat yet but give it a try. When capturing Fox-1C telemetry last
night thought I saw some FUNcube data signature on the waterfall.
73, Scott, KA7FVV
Director - KBARA. kbara.org
Alternate Board of Director - AMSAT amsat.org
Co-Owner WA7DRE 443.525 System Fusion Repeater
Co-Owner KA7FVV 147.320 KBARA Repeater
ka7fvv.net
> On Dec 4, 2018, at 07:09, Chris Pohlad-Thomas
<chrispohladthomas@?????.???> wrote:
>
> Does anyone have the TLE for this or can point me where to find it?
>
> --
> Chris Pohlad-Thomas
> K <http://about.me/chrispt>C1E
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 2
Date: Tue, 4 Dec 2018 09:31:53 +0000
From: Stewart Morgan <morgan_st@????.???>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: [amsat-bb] TH-D72
Message-ID:
<SN6PR01MB448037FF7BD7B1985BC463A0E3AF0@?????????????.????.????????????.???>
Content-Type: text/plain; charset="utf-8"
Bob Bruninga reminded me that I was confusing the solution to two
different problems.? The squelch needs to be off in APRS and Packet
modes in order for transmit (not receive) to function properly.? Battery
Saver mode should be off, otherwise APRS packet decoding is likely to
suffer, and there are several mentions in the Kenwood documentation
about this.
Sorry for the mistake.
Todd
AL0I
------------------------------
Message: 3
Date: Tue, 4 Dec 2018 11:30:39 -0800
From: "Ken Swaggart" <k.swaggart@???????.???>
To: "'Greg D'" <ko6th.greg@?????.???>, "'Amsat BB'"
<AMSAT-BB@?????.???>
Subject: Re: [amsat-bb] Fox-1Cliff in CM98 18:44z
Message-ID: <002501d48c07$d7044cf0$850ce6d0$@???????.???>
Content-Type: text/plain; charset="us-ascii"
I've been using the TLE for objet 43760, 2018-099C. It was in the middle of
one group, agrees well with the post-launch TLE, and tracked Fox1Cliff very
nicely during this morning's pass.
Ken, W7KKE
-----Original Message-----
From: AMSAT-BB <amsat-bb-bounces@?????.???> On Behalf Of Greg D
Sent: Tuesday, December 4, 2018 10:54
To: Amsat BB <AMSAT-BB@?????.???>
Subject: [amsat-bb] Fox-1Cliff in CM98 18:44z
Heard "Fox 1 Cliff Safemode" very strong (S9+20) on an overhead pass here in
CM98. 18:45Z and again at 18:47Z and 18:49Z a minute before predicted LOS.
I was using the elements from 2018-099A. Frequency seemed a tad high (maybe
a khz) for where gPredict said the satellite was, so either a small offset
in the actual frequency, or the satellite was a bit behind predicted.
Greg KO6TH
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available to all
interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 4
Date: Tue, 4 Dec 2018 23:17:00 +0100
From: Nico Janssen <hamsat@??????.??>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>, Ray Hoad
<ray.hoad@????????.???>
Subject: [amsat-bb] Tracking objects from the SSO-A launch
Message-ID: <1a3497b0-4b55-4d15-a97c-dac5c42dfb03@??????.??>
Content-Type: text/plain; charset=utf-8; format=flowed
All,
Separations between the objects from the SSO-A launch are remarkably
small, some no more than 1 or 2 s. And not all TLE sets have been
published yet. So identifying objects is hard for the time being. But for
tracking purposes I have some suggestions.
For JY1Sat use object 43759, for ITASat 1 use object 43760, for Fox 1Cliff
use object 43767 and for Move 2 use object 43761. These should work well
for now. But note that these assignments may change later on.
73,
Nico PA0DLO
------------------------------
Message: 5
Date: Tue, 4 Dec 2018 21:02:38 -0500
From: John Brier <johnbrier@?????.???>
To: morgan_st@????.???
Cc: AMSAT BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] TH-D72
Message-ID:
<CALn0fKMz6MES1KBbmStax1eKPb-kuvW8+YYOz8epRbtWUpVB-A@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
You said off [open] but I think you meant on [closed].
You can have the squelch off/open and still TX if you disable DCD sense
(Data Carrier Detect sense). This allows for standard satellite/weak signal
practice (never use squelch).
The downsides with disabling DCD sense are that it will allow you to TX
while the digipeater is TXing so you'll miss decodes.
DCD sense could also avoid a situation where two locals are TXing at the
same time. If you can hear someone else TXing DCD sense will not allow you
to beacon/TX at that moment, so that could reduce congestion on the channel.
73, John Brier KG4AKV
On Tue, Dec 4, 2018 at 4:10 PM Stewart Morgan <morgan_st@????.???> wrote:
> Bob Bruninga reminded me that I was confusing the solution to two
> different problems. The squelch needs to be off in APRS and Packet
> modes in order for transmit (not receive) to function properly. Battery
> Saver mode should be off, otherwise APRS packet decoding is likely to
> suffer, and there are several mentions in the Kenwood documentation
> about this.
>
> Sorry for the mistake.
>
> Todd
> AL0I
>
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 6
Date: Wed, 5 Dec 2018 14:22:58 +0100
From: Nico Janssen <hamsat@??????.??>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>, Ray Hoad
<ray.hoad@????????.???>
Subject: Re: [amsat-bb] Tracking objects from the SSO-A launch
Message-ID: <e3482fcc-831f-5773-69d1-05072fc48d19@??????.??>
Content-Type: text/plain; charset=utf-8; format=flowed
Another suggestion: for ESEO use object 43763.
73,
Nico PA0DLO
On 04-12-18 23:17, Nico Janssen wrote:
> All,
>
> Separations between the objects from the SSO-A launch are remarkably
> small, some no more than 1 or 2 s. And not all TLE sets have been
> published yet. So identifying objects is hard for the time being. But for
> tracking purposes I have some suggestions.
>
> For JY1Sat use object 43759, for ITASat 1 use object 43760, for Fox
> 1Cliff
> use object 43767 and for Move 2 use object 43761. These should work well
> for now. But note that these assignments may change later on.
>
> 73,
> Nico PA0DLO
>
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership.
> Opinions expressed
> are solely those of the author, and do not reflect the official views
> of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 7
Date: Wed, 5 Dec 2018 08:26:49 -0600
From: JoAnne K9JKM <k9jkm@???????.???>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: [amsat-bb] ANS-339 AMSAT News Service Special Bulletin -
Fox-1Cliff Designated AMSAT-OSCAR 95 (AO-95)
Message-ID: <2407219c-7e11-1269-ef7b-547f6f7bacf0@???????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
AMSAT NEWS SERVICE SPECIAL BULLETIN
ANS-339.01
In this Special Bulletin:
* Fox-1Cliff Designated AMSAT-OSCAR 95 (AO-95)
SB SAT @ AMSAT $ANS-339.01
ANS-339 AMSAT News Service Special Bulletin
AMSAT News Service Special Bulletin 339.01
From AMSAT HQ KENSINGTON, MD
DATE December 5, 2018
To All RADIO AMATEURS
BID: $ANS-339.01
On December 3rd, 2018, Fox-1Cliff was launched on a Falcon 9
vehicle from Vandenberg Air Force Base in California. Part
of Spaceflight?s SSO-A: Smallsat Express launch, Fox-1Cliff
was named after long time AMSAT supporter Cliff Buttschardt,
K7RR (SK). In the 48 hours after launch, more than 110
amateur radio operators around the world have successfully
received and submitted telemetry from the satellite.
Following in our long tradition of naming amateur satellites,
AMSAT hereby designates Fox-1Cliff as AMSAT-OSCAR 95 (AO-95).
Thank you to those who have supported this mission with their
time, talent, and financial support for the benefit of amateur
radio operators worldwide.
73,
Drew Glasbrenner, KO4MA
AMSAT VP Operations / OSCAR Number Administrator
[ANS thanks Drew Glasbrenner, KO4MA, AMSAT VP Operations /
?OSCAR Number Administrator for the above information]
+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
??????? For a limited time, new and rewewing AMSAT members
?????????????? will receive a free digital copy of
???????????? "Getting Started with Amateur Satellites"
?????????? Join or renew your AMSAT membership today at
????? https://www.amsat.org/product-category/amsat-membership/
+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
In addition to regular membership, AMSAT offers life memberships,
and sustaining donors to AMSAT Project Funds, will be eligible to
receive additional benefits. Application forms are available from
the AMSAT Office.
Primary and secondary school students are eligible for membership
at one-half the standard yearly rate. Post-secondary school students
enrolled in at least half time status shall be eligible for the
student rate for a maximum of 6 post-secondary years in this status.
Contact Martha at the AMSAT Office for additional student membership
information.
73 and Remember to help keep Amateur Radio in space,
This week's ANS Contributing Editor,
JoAnne Maenpaa, K9JKM
k9jkm at amsat dot org
------------------------------
Message: 8
Date: Wed, 5 Dec 2018 10:14:11 -0500
From: Burns Fisher <burns@??????.??>
To: Alan Biddle <APBIDDLE@???????.???>
Cc: AMSAT BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] FoxTelem Crashes coping Fox1 Cliff
Message-ID:
<CABX7KxXgK2Aujx7b17FiyKzaSBTSFOSoBcQGH-LsSsEKknfEPQ@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
We know that it crashes if you select one of the records at the bottom when
there is no hi/low telemetry, which would have been the case during reset 0.
On Tue, Dec 4, 2018 at 9:39 AM Alan <wa4sca@?????.???> wrote:
> Frank,
>
> The BB list does not pass attachments or HTML, so you will need to provide
> a link.
>
> Fox-1Cliff was in Initial Mode, which is somewhat different from Safe
> Mode. No idea why this should cause a problem, however. It is now in Safe
> Mode, so you should have better luck.
>
> 73,
>
> Alan
> WA4SCA
>
> <-----Original Message-----
> <From: AMSAT-BB [mailto:amsat-bb-bounces@?????.???? On Behalf Of Frank
> <Sent: Tuesday, December 04, 2018 01:27 AM
> <To: AMSAT <amsat-bb@?????.???>
> <Subject: [amsat-bb] FoxTelem Crashes coping Fox1 Cliff
> <
> <My FoxTelem crashes when coping DUV from Fox 1 Cliff. Program is okay
> <coping DUV until Veronica speaks and then it crashes. The program worked
> <fine on AO85 pass after Fox 1 Cliff pass. Attached is a screenshot of
> the error
> <message. The program has also worked fine on AO91 and AO92 in the past.
> <Don?t know what?s different about Fox 1 Cliff. Any ideas?
> <
> <Thanks,
> <Frank
> <K6FW
> <
> <
> <_______________________________________________
> <Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> <to all interested persons worldwide without requiring membership. Opinions
> <expressed
> <are solely those of the author, and do not reflect the official views of
> AMSAT-
> <NA.
> <Not an AMSAT-NA member? Join now to support the amateur satellite
> <program!
> <Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 9
Date: Wed, 5 Dec 2018 11:19:41 -0800
From: Frank <K6FW1@???????.???>
To: Burns Fisher <burns@??????.??>
Cc: AMSAT BB <amsat-bb@?????.???>, Alan Biddle <APBIDDLE@???????.???>
Subject: Re: [amsat-bb] FoxTelem Crashes coping Fox1 Cliff
Message-ID: <27D680C3-C68F-4680-A188-287A5A5305B0@???????.???>
Content-Type: text/plain; charset=utf-8
Ok I have Display UTC Time checked at the bottom of the satellite tab.
Would that cause FoxTelm to crash? I have not experienced any further
FoxTelm crashes since the day of the launch.
> On Dec 5, 2018, at 7:14 AM, Burns Fisher <burns@??????.??> wrote:
>
> We know that it crashes if you select one of the records at the bottom
when there is no hi/low telemetry, which would have been the case during
reset 0.
>
> On Tue, Dec 4, 2018 at 9:39 AM Alan <wa4sca@?????.???
<mailto:wa4sca@?????.???>> wrote:
> Frank,
>
> The BB list does not pass attachments or HTML, so you will need to provide
a link.
>
> Fox-1Cliff was in Initial Mode, which is somewhat different from Safe
Mode. No idea why this should cause a problem, however. It is now in Safe
Mode, so you should have better luck.
>
> 73,
>
> Alan
> WA4SCA
>
> <-----Original Message-----
> <From: AMSAT-BB [mailto:amsat-bb-bounces@?????.???
<mailto:amsat-bb-bounces@?????.???>] On Behalf Of Frank
> <Sent: Tuesday, December 04, 2018 01:27 AM
> <To: AMSAT <amsat-bb@?????.??? <mailto:amsat-bb@?????.???>>
> <Subject: [amsat-bb] FoxTelem Crashes coping Fox1 Cliff
> <
> <My FoxTelem crashes when coping DUV from Fox 1 Cliff. Program is okay
> <coping DUV until Veronica speaks and then it crashes. The program worked
> <fine on AO85 pass after Fox 1 Cliff pass. Attached is a screenshot of
the error
> <message. The program has also worked fine on AO91 and AO92 in the past.
> <Don?t know what?s different about Fox 1 Cliff. Any ideas?
> <
> <Thanks,
> <Frank
> <K6FW
> <
> <
> <_______________________________________________
> <Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???>. AMSAT-NA makes
this open forum available
> <to all interested persons worldwide without requiring membership. Opinions
> <expressed
> <are solely those of the author, and do not reflect the official views of
AMSAT-
> <NA.
> <Not an AMSAT-NA member? Join now to support the amateur satellite
> <program!
> <Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
<http://www.amsat.org/mailman/listinfo/amsat-bb>
>
> _______________________________________________
> Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???>. AMSAT-NA makes
this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
<http://www.amsat.org/mailman/listinfo/amsat-bb>
------------------------------
Message: 10
Date: Wed, 5 Dec 2018 07:30:11 +0000
From: "Julian Horn (Clara)" <julianhorn@?????.??.??>
To: Scott <ka7fvv@?????.???>
Cc: AMSAT BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] TLE for JY1-Sat
Message-ID: <1D335A8D-EA3A-46F0-8ECF-923DF4BF4674@?????.??.??>
Content-Type: text/plain; charset=us-ascii
I copied Fox1 last night on two consecutive passes (in JO02jn) and I could
see the signature two spikes come and go that looked like FUNCube data as
well. I was using the TLE set loaded by MacDoppler from AMSAT.
Didn't want to break the pass to chase it to see what it was but none of the
existing FunCube payload carriers were showing on the tracking software.
73, Julian M0NUX
> On 4 Dec 2018, at 19:20, Scott via AMSAT-BB <amsat-bb@?????.???> wrote:
>
> In the New-TLE element set use 2018-099A works for Fox-1C. I have not
tried to track JY1Sat yet but give it a try. When capturing Fox-1C
telemetry last night thought I saw some FUNcube data signature on the
waterfall.
>
> 73, Scott, KA7FVV
> Director - KBARA. kbara.org
> Alternate Board of Director - AMSAT amsat.org
> Co-Owner WA7DRE 443.525 System Fusion Repeater
> Co-Owner KA7FVV 147.320 KBARA Repeater
> ka7fvv.net
>
>
>> On Dec 4, 2018, at 07:09, Chris Pohlad-Thomas
<chrispohladthomas@?????.???> wrote:
>>
>> Does anyone have the TLE for this or can point me where to find it?
>>
>> --
>> Chris Pohlad-Thomas
>> K <http://about.me/chrispt>C1E
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
Opinions expressed
>> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 11
Date: Wed, 5 Dec 2018 15:44:37 +0000
From: Joe Puma <kd2nfc@?????.???>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: [amsat-bb] tracking Fox-1Cliff
Message-ID:
<YTOPR0101MB2060710184B5F424B5B6B640FAA80@???????????????.????????.????.??????
?.???>
Content-Type: text/plain; charset="Windows-1252"
So Ashhar bird is called Fox-1Cliff correct?
Can it be tracked in Orbitron? I suppose we need keplar data of the bird.
The program has a file for cubesats but I don?t see the bird. I see other
like funcube Ao-73. How are we all tracking Ashhars bird?
I already have Foxtelem
Joe
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
------------------------------
Message: 12
Date: Wed, 5 Dec 2018 08:31:18 -0800
From: "Loren M. Lang" <penguin359@?????.???>
To: amsat-bb@?????.???
Subject: [amsat-bb] Has anyone heard the Exceed Satellite?
Message-ID:
<CACymvmc+xT-2imR4bV=gyR+K15+4E7eAtDyLjyCRfZUPn1MEbw@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
After several passes, I still have not heard the Exceed satellite
coordinated for 145.900 MHz. Has anyone else heard it or has it changed
frequencies?
- Loren
K7IW
------------------------------
Message: 13
Date: Wed, 5 Dec 2018 20:52:28 +0000 (UTC)
From: Scott Harvey <ka7fvv@?????.???>
To: Joe Puma <kd2nfc@?????.???>, "amsat-bb@?????.????
<amsat-bb@?????.???>
Subject: Re: [amsat-bb] tracking Fox-1Cliff
Message-ID: <1467822967.2492285.1544043148921@????.?????.???>
Content-Type: text/plain; charset=UTF-8
Right now it is in the NASA Bare set under Fox-1Cliff soon show up as AO-95
I am sure.? It is also one of the 2018-099 objects in the New Tle elements
set.? If you have not added the NASA Bare set to Orbitron here is the URL.?
It is nice since it has all the standard names of the satellites.? One of
the few sets that has AO-85 as well.
https://www.amsat.org/tle/current/nasabare.txt
?73, Scott, KA7FVV
Director - KBARA? kbara.orgAlternate Board of Director - AMSAT? amsat.org
Co-Owner WA7DRE 443.525 System Fusion Repeater
Co-Owner KA7FVV 147.320 KBARA Repeater
http://www.ka7fvv.net
From: Joe Puma <kd2nfc@?????.???>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>
Sent: Wednesday, December 5, 2018 12:46 PM
Subject: [amsat-bb] tracking Fox-1Cliff
So Ashhar bird is called Fox-1Cliff correct?
Can it be tracked in Orbitron? I suppose we need keplar data of the bird.
The program has a file for cubesats but I don?t see the bird. I see other
like funcube Ao-73. How are we all tracking Ashhars bird?
I already have Foxtelem
Joe
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@?????.???.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 13, Issue 402
*****************************************
Read previous mail | Read next mail
| |
