| |
CX2SA > SATDIG 07.12.18 00:46l 721 Lines 23903 Bytes #999 (0) @ WW
BID : AMSATBB13405
Read: GUEST
Subj: AMSAT-BB-digest V13 405
Path: IW8PGT<CX2SA
Sent: 181206/2241Z @:CX2SA.SAL.URY.SOAM #:59639 [Salto] FBB7.00e $:AMSATBB13405
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Re: Tracking objects from the SSO-A launch (Nico Janssen)
2. Re: Has anyone heard the Exceed Satellite? (Burns Fisher)
3. Fox-1Cliff in FN41fn 15:41 - 15:47 UTC (Bob)
4. Re: ESEO telemetry information now available (Daniel Est?vez)
5. Re: Has anyone heard the Exceed Satellite? (Jerry Buxton)
6. Re: Has anyone heard the Exceed Satellite? (Jerry Buxton)
7. Re: Has anyone heard the Exceed Satellite? (Pedro Converso)
8. Who can be my antenna elmer? (Hans BX2ABT)
9. TH-72E (cl.rudi@?????.????
10. Looking for a Yeasu FT-847 (Brian D. Karcher)
11. Recalibrate Control Box (Vincenzo Mone)
----------------------------------------------------------------------
Message: 1
Date: Thu, 6 Dec 2018 12:34:55 +0100
From: Nico Janssen <hamsat@??????.??>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>, Ray Hoad
<ray.hoad@????????.???>
Subject: Re: [amsat-bb] Tracking objects from the SSO-A launch
Message-ID: <53503079-2bea-cae6-5d6a-d654b913982a@??????.??>
Content-Type: text/plain; charset=utf-8; format=flowed
New suggestions: for AO 95 (ex Fox 1Cliff) now use object 43774, for MOVE-II
now use object 43775, and for PWSat 2 use object 43776.
Again: this may change later on when separations increase and new TLE sets
become available. Currently only 14 TLE sets have been published for the
64+ objects from this launch.
73,
Nico PA0DLO
On 05-12-18 14:22, Nico Janssen wrote:
>
> Another suggestion: for ESEO use object 43763.
>
> 73,
> Nico PA0DLO
>
> On 04-12-18 23:17, Nico Janssen wrote:
>> All,
>>
>> Separations between the objects from the SSO-A launch are remarkably
>> small, some no more than 1 or 2 s. And not all TLE sets have been
>> published yet. So identifying objects is hard for the time being. But
>> for
>> tracking purposes I have some suggestions.
>>
>> For JY1Sat use object 43759, for ITASat 1 use object 43760, for Fox
>> 1Cliff
>> use object 43767 and for Move 2 use object 43761. These should work well
>> for now. But note that these assignments may change later on.
>>
>> 73,
>> Nico PA0DLO
>>
>>
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views
>> of AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership.
> Opinions expressed
> are solely those of the author, and do not reflect the official views
> of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 2
Date: Thu, 6 Dec 2018 09:59:44 -0500
From: Burns Fisher <burns@??????.??>
To: Nitin Muttin <vu3tyg@?????.??.??>
Cc: AMSAT BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] Has anyone heard the Exceed Satellite?
Message-ID:
<CABX7KxXOffi5_uCsbL1NADKqWoxEDMRhqEfs3qPm=0M=VZVU7w@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Unfortunately, when Fox-1Cliff (and all the Foxes) turns on its Tx it
starts at a low frequency and sweeps up to its nominal 145920 over the
course of a second or less. You might have heard it sweep across 900.
There would be no modulation while that was happening, and it would happen
about every two minutes.
On Thu, Dec 6, 2018 at 12:40 AM Nitin Muttin via AMSAT-BB <
amsat-bb@?????.???> wrote:
> Thanks Jim for sharing your observations, the satellite sends out a beacon
> "V" followed by the RTTY telemetry every minute.
> 73
> Nitin [VU3TYG]
>
> On Thursday, 6 December, 2018, 10:04:31 AM IST, Jim White <
> jim@?????????????????.???> wrote:
>
> Heard unmodulated bursts about one second long about 2 minutes and 10
> seconds apart on 145.900 during the pass starting about 0300 UTC. The
> direction roughly corresponded with elements 43766. That is, the last in
> the train of objects in the catalog 18999 group. It sounded unmodulated
> and may have been sweeping in frequency across my receiver. It was
> clearly from one of the group of satellites; it started at about AOS of
> that object and was not heard after LOS. The signal was fairly strong.
> It had the feel of a transmitter gone bad or perhaps without enough
> power to come fully on and stabilize.
>
> Using a two Yagi EME array.
>
> Jim
>
> jim@?????????????????.???
>
> wd0e@?????.???
>
> On 12/5/2018 7:09 PM, Loren M. Lang wrote:
> > What's the best TLE for tracking that satellite?
> >
> > - Loren
> > K7IW
> >
> >
> > On Wed, Dec 5, 2018 at 6:06 PM Jerry Buxton <n0jy@?????.???> wrote:
> >
> >> ExseedSat has been heard, but is sporadic. Along with telemetry from
> >> Cliff, if stations with big ears can listen for ExseedSat and report
> >> here that would be appreciated.
> >>
> >> Jerry Buxton, N?JY
> >>
> >> On 12/5/2018 16:26, Burns Fisher wrote:
> >>> I reported to Nitin that I had seen it (was watching a display while
> >> trying
> >>> to get Fox-1Cliff telemetry). But I think I was mistaken looking at
> the
> >>> wrong freq. I did not see it at all this morning.
> >>>
> >>> On Wed, Dec 5, 2018 at 4:18 PM Fernando Ramirez <
> >> framirezferrer@?????.???>
> >>> wrote:
> >>>
> >>>> I've listened for the past couple of nights and only heard JY1-SAT,
> >> ITASAT,
> >>>> AO-95 and MOVE-II around those frequencies. Nothing heard from Exceed
> on
> >>>> 145.900 MHz.
> >>>>
> >>>> 73
> >>>> Fernando, NP4JV
> >>>> DM41mi, Arizona
> >>>>
> >>>> On Wed, Dec 5, 2018, 1:48 PM Loren M. Lang <penguin359@?????.???
> wrote:
> >>>>
> >>>>> After several passes, I still have not heard the Exceed satellite
> >>>>> coordinated for 145.900 MHz. Has anyone else heard it or has it
> changed
> >>>>> frequencies?
> >>>>>
> >>>>> - Loren
> >>>>> K7IW
> >>>>> _______________________________________________
> >>>>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
> available
> >>>>> to all interested persons worldwide without requiring membership.
> >>>> Opinions
> >>>>> expressed
> >>>>> are solely those of the author, and do not reflect the official views
> >> of
> >>>>> AMSAT-NA.
> >>>>> Not an AMSAT-NA member? Join now to support the amateur satellite
> >>>> program!
> >>>>> Subscription settings:
> http://www.amsat.org/mailman/listinfo/amsat-bb
> >>>>>
> >>>> _______________________________________________
> >>>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> >>>> to all interested persons worldwide without requiring membership.
> >> Opinions
> >>>> expressed
> >>>> are solely those of the author, and do not reflect the official views
> of
> >>>> AMSAT-NA.
> >>>> Not an AMSAT-NA member? Join now to support the amateur satellite
> >> program!
> >>>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >>>>
> >>> _______________________________________________
> >>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> >>> to all interested persons worldwide without requiring membership.
> >> Opinions expressed
> >>> are solely those of the author, and do not reflect the official views
> of
> >> AMSAT-NA.
> >>> Not an AMSAT-NA member? Join now to support the amateur satellite
> >> program!
> >>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >>>
> >>>
> >> _______________________________________________
> >> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> >> to all interested persons worldwide without requiring membership.
> Opinions
> >> expressed
> >> are solely those of the author, and do not reflect the official views of
> >> AMSAT-NA.
> >> Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> >> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >>
> > _______________________________________________
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions expressed
> > are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 3
Date: Thu, 6 Dec 2018 10:50:37 -0500
From: Bob <WB4SON@?????.???>
To: AMSAT-BB <AMSAT-BB@?????.???>
Subject: [amsat-bb] Fox-1Cliff in FN41fn 15:41 - 15:47 UTC
Message-ID:
<CAPonRZ84=HfHKsPxESQADSt2qXY5hNqG2ypL1PePoH3vTJDxDA@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Very nice overhead pass here in RI. Heard "Fox1Cliff Safe Mode" full
quiteing four times from 15:41 through 15:47 on a M2 Eggbeater. No
telemetry yet until I get my IC-9100 connected via the data jack on the
back.
Congrats to the Fox Team!
73, Bob, WB4SON
------------------------------
Message: 4
Date: Thu, 6 Dec 2018 17:25:22 +0100
From: Daniel Est?vez <daniel@????????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] ESEO telemetry information now available
Message-ID: <021cd059-299c-7608-f9fc-2d3621e95126@????????.???>
Content-Type: text/plain; charset=utf-8
El 04/12/18 a las 18:29, Dani EA4GPZ escribi?:
> Hi all,
> The beacon is at 437.000MHz and it is 4k8 or 9k6 FSK AX.25, so it can be
> received with any packet radio TNC, such as UZ7HO's soundmodem,
> direwolf, or similar.
Hi all,
As some people have already mentioned me, it is not standard FSK AX.25,
and it cannot be decoded with direwolf, UZ7HO or similar.
Sorry about the confusion, from reading the IARU frequency coordination
sheet and the information published by ESA I expected this to be
standard AX.25, but this is not the case.
We are currently analysing some of the packets that we've collected, but
for now it is clear that the coding used by ESEO deviates from AX.25 in
several important points and the documentation published by ESA doesn't
explain clearly enough these deviations.
Stay tuned for more information.
73,
Dani EA4GPZ.
------------------------------
Message: 5
Date: Thu, 6 Dec 2018 13:01:03 -0600
From: Jerry Buxton <n0jy@?????.???>
To: "Loren M. Lang" <penguin359@?????.???>
Cc: amsat-bb@?????.???
Subject: Re: [amsat-bb] Has anyone heard the Exceed Satellite?
Message-ID: <3e355c3f-5af7-8ebe-76cb-12d6d1355b6b@?????.???>
Content-Type: text/plain; charset=utf-8
You can use the AO-95 elements from nasabare.txt, ExseedSat was on top
of Cliff in the deployer!? I'm sure they are still pretty close friends
right now.
Jerry Buxton, N?JY
On 12/5/2018 20:09, Loren M. Lang wrote:
> What's the best TLE for tracking that satellite?
>
> - Loren
> K7IW
>
>
------------------------------
Message: 6
Date: Thu, 6 Dec 2018 13:03:44 -0600
From: Jerry Buxton <n0jy@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] Has anyone heard the Exceed Satellite?
Message-ID: <17bacde9-925d-66f0-ab4d-9489e94c3472@?????.???>
Content-Type: text/plain; charset=utf-8
That might be the Fox Tail of AO-95, although it moves pretty quickly as
it takes less than a second to get on frequency so your bandwidth may or
may not have covered enough to hear it for a second.? The 2 minutes and
10 second apart is a sure thing from the perspective of the AO-95
beacon, though.? Spot on for the timing.
Jerry Buxton, N?JY
On 12/5/2018 22:16, Jim White wrote:
> Heard unmodulated bursts about one second long about 2 minutes and 10
> seconds apart on 145.900 during the pass starting about 0300 UTC.
------------------------------
Message: 7
Date: Thu, 6 Dec 2018 16:49:39 -0300
From: Pedro Converso <pconver@?????.???>
To: Burns Fisher <burns@??????.??>
Cc: AMSAT BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] Has anyone heard the Exceed Satellite?
Message-ID:
<CANTZqK=QNWri7nif8gBV8GsgvM54JJynBG1yxCne=Zwam=Mevw@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Audio capture on 145.900 on an Exceed Pass over Buenos Aires, tracking
with http://amsat.org.ar/pass?satx=exceed
Wonder if it is Exceed or any other, will keep trying.
http://amsat.org.ar/exceed.wav
73, lu7abf, Pedro
On 12/6/18, Burns Fisher <burns@??????.??> wrote:
> Unfortunately, when Fox-1Cliff (and all the Foxes) turns on its Tx it
> starts at a low frequency and sweeps up to its nominal 145920 over the
> course of a second or less. You might have heard it sweep across 900.
> There would be no modulation while that was happening, and it would happen
> about every two minutes.
>
> On Thu, Dec 6, 2018 at 12:40 AM Nitin Muttin via AMSAT-BB <
> amsat-bb@?????.???> wrote:
>
>> Thanks Jim for sharing your observations, the satellite sends out a beacon
>> "V" followed by the RTTY telemetry every minute.
>> 73
>> Nitin [VU3TYG]
>>
>> On Thursday, 6 December, 2018, 10:04:31 AM IST, Jim White <
>> jim@?????????????????.???> wrote:
>>
>> Heard unmodulated bursts about one second long about 2 minutes and 10
>> seconds apart on 145.900 during the pass starting about 0300 UTC. The
>> direction roughly corresponded with elements 43766. That is, the last in
>> the train of objects in the catalog 18999 group. It sounded unmodulated
>> and may have been sweeping in frequency across my receiver. It was
>> clearly from one of the group of satellites; it started at about AOS of
>> that object and was not heard after LOS. The signal was fairly strong.
>> It had the feel of a transmitter gone bad or perhaps without enough
>> power to come fully on and stabilize.
>>
>> Using a two Yagi EME array.
>>
>> Jim
>>
>> jim@?????????????????.???
>>
>> wd0e@?????.???
>>
>> On 12/5/2018 7:09 PM, Loren M. Lang wrote:
>> > What's the best TLE for tracking that satellite?
>> >
>> > - Loren
>> > K7IW
>> >
>> >
>> > On Wed, Dec 5, 2018 at 6:06 PM Jerry Buxton <n0jy@?????.???> wrote:
>> >
>> >> ExseedSat has been heard, but is sporadic. Along with telemetry from
>> >> Cliff, if stations with big ears can listen for ExseedSat and report
>> >> here that would be appreciated.
>> >>
>> >> Jerry Buxton, N?JY
>> >>
>> >> On 12/5/2018 16:26, Burns Fisher wrote:
>> >>> I reported to Nitin that I had seen it (was watching a display while
>> >> trying
>> >>> to get Fox-1Cliff telemetry). But I think I was mistaken looking at
>> the
>> >>> wrong freq. I did not see it at all this morning.
>> >>>
>> >>> On Wed, Dec 5, 2018 at 4:18 PM Fernando Ramirez <
>> >> framirezferrer@?????.???>
>> >>> wrote:
>> >>>
>> >>>> I've listened for the past couple of nights and only heard JY1-SAT,
>> >> ITASAT,
>> >>>> AO-95 and MOVE-II around those frequencies. Nothing heard from Exceed
>> on
>> >>>> 145.900 MHz.
>> >>>>
>> >>>> 73
>> >>>> Fernando, NP4JV
>> >>>> DM41mi, Arizona
>> >>>>
>> >>>> On Wed, Dec 5, 2018, 1:48 PM Loren M. Lang <penguin359@?????.???
>> wrote:
>> >>>>
>> >>>>> After several passes, I still have not heard the Exceed satellite
>> >>>>> coordinated for 145.900 MHz. Has anyone else heard it or has it
>> changed
>> >>>>> frequencies?
>> >>>>>
>> >>>>> - Loren
>> >>>>> K7IW
>> >>>>> _______________________________________________
>> >>>>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
>> available
>> >>>>> to all interested persons worldwide without requiring membership.
>> >>>> Opinions
>> >>>>> expressed
>> >>>>> are solely those of the author, and do not reflect the official
>> >>>>> views
>> >> of
>> >>>>> AMSAT-NA.
>> >>>>> Not an AMSAT-NA member? Join now to support the amateur satellite
>> >>>> program!
>> >>>>> Subscription settings:
>> http://www.amsat.org/mailman/listinfo/amsat-bb
>> >>>>>
>> >>>> _______________________________________________
>> >>>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> >>>> to all interested persons worldwide without requiring membership.
>> >> Opinions
>> >>>> expressed
>> >>>> are solely those of the author, and do not reflect the official views
>> of
>> >>>> AMSAT-NA.
>> >>>> Not an AMSAT-NA member? Join now to support the amateur satellite
>> >> program!
>> >>>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>> >>>>
>> >>> _______________________________________________
>> >>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> >>> to all interested persons worldwide without requiring membership.
>> >> Opinions expressed
>> >>> are solely those of the author, and do not reflect the official views
>> of
>> >> AMSAT-NA.
>> >>> Not an AMSAT-NA member? Join now to support the amateur satellite
>> >> program!
>> >>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>> >>>
>> >>>
>> >> _______________________________________________
>> >> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> >> to all interested persons worldwide without requiring membership.
>> Opinions
>> >> expressed
>> >> are solely those of the author, and do not reflect the official views
>> >> of
>> >> AMSAT-NA.
>> >> Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>> >> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>> >>
>> > _______________________________________________
>> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> > to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> > are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> > Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership. Opinions
>> expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>>
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership. Opinions
>> expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 8
Date: Fri, 7 Dec 2018 05:01:27 +0800
From: Hans BX2ABT <hans.bx2abt@???.?????.???>
To: amsat-bb@?????.???
Subject: [amsat-bb] Who can be my antenna elmer?
Message-ID: <04c7c2c2-9f3e-0cc3-0523-5af573211118@???.?????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
I am in need of a patient and experience DIY antenna elmer who can
advice me on yagi antennas and feedlines and help me think of testing
methods and how to interpret the results. If you are willing to engage
with me on an email exchange (probably a few a week) and are willing to
put up with me :-) then please do mail me off-list. I would really
appreciate it as I don't have anyone here locally who can help me out.
Thank you and 73 de Hans
BX2ABT
P.S. I do have good DIY skills, but limited resources to test: a
cross-needle SWR meter and an HT only. I already built a 70cm 7 element
yagi, I'm not starting from scratch.
------------------------------
Message: 9
Date: Thu, 6 Dec 2018 19:36:27 +0100
From: <cl.rudi@?????.???>
To: <amsat-bb@?????.???>
Subject: [amsat-bb] TH-72E
Message-ID: <005e01d48d92$99b90c50$cd2b24f0$@?????.???>
Content-Type: text/plain; charset="us-ascii"
Dear All,
Many thanks for all info on the APRS settings but nothing helps.
The radio sends the beacon but does not receive any aprs info on the screen
I can hear the packet sound loud and clear.
Can it be that is has something to do with US or EU settings.
Thanks for info and reply.
Rudi / ON7CL
------------------------------
Message: 10
Date: Thu, 6 Dec 2018 15:39:46 -0600
From: "Brian D. Karcher" <kg5gjt@???.???>
To: amsat-bb@?????.???
Subject: [amsat-bb] Looking for a Yeasu FT-847
Message-ID: <ED8E6F39-51DE-4BB0-8E99-36B95F907CFF@???.???>
Content-Type: text/plain; charset=us-ascii
I have decided to take the plunge and start learning to work linear
satellites. I am looking for a Yaesu FT-847 to purchase. If you have an
working Yaesu FT-847 your willing to sell let me know. My email is
KG5GJT@???.???.
73,
Brian D. Karcher
KG5GJT
Sent from my iPhone
------------------------------
Message: 11
Date: Thu, 6 Dec 2018 23:37:03 +0100
From: "Vincenzo Mone" <vimone@?????.??>
To: "Amsat - BBs" <amsat-bb@?????.???>
Subject: [amsat-bb] Recalibrate Control Box
Message-ID:
<!&!AAAAAAAAAAAYAAAAAAAAALgqrd2N1rRAiaQvRd7pgRDCgAAAEAAAAFtgX/dM5ZVFjr/8+mZlUK
IBAAAAAA==@?????.??>
Content-Type: text/plain; charset="us-ascii"
Hello all,
I own a Yaesu G-5500 Azimuth/Elevation Rotator.
I am noticing that it is like it is not right calibrated.
As I have to do some maintenance on the antennas, I would like
To recalibrate both Azimuth and Elevation Rotator with the control Box in
the shack.
Is there any tutorial or somebody can tell me the correct way to recalibrate
them.
Any help will be really appreciated
73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
*********************************
****** GSM +39 328 7110193 ******
***** SMS +39 328 7110193 *****
*********************************
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@?????.???.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 13, Issue 405
*****************************************
Read previous mail | Read next mail
| |
