| |
CX2SA > SATDIG 11.12.18 23:42l 872 Lines 26312 Bytes #999 (0) @ WW
BID : AMSATBB13414
Read: GUEST
Subj: AMSAT-BB-digest V13 414
Path: IW8PGT<IZ3LSV<IK6ZDE<I0OJJ<N6RME<CX2SA
Sent: 181211/2126Z @:CX2SA.SAL.URY.SOAM #:59947 [Salto] FBB7.00e $:AMSATBB13414
>From cx2sa%cx2sa.sal.ury.soam@i0ojj.ampr.org Tue Dec 11 22:30:28 2018
Received: from i0ojj.ampr.org by i0ojj.ampr.org (JNOS2.0k.3b) with SMTP
id AA65427 ; Tue, 11 Dec 2018 22:30:28 +0100
Message-Id: <AMSATBB13414@n6rme.bbs>
>From: cx2sa@cx2sa.sal.ury.soam
X-JNOS-User-Port: Telnet (n6rme @ 44.134.32.240) -> Sending message
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Re: FoxTelem Program & RTL820T Dongles (Hasan al-Basri)
2. Re: Skeds - KL7, DE ID ME NV RI SD VT (Gabriel Zeifman)
3. Upcoming ARISS Contact Schedule as of 2018-12-11 02:30 UTC
(aj9n@???.????
4. AO-95 Audio1 (Pedro Converso)
5. AO-95 Audio2 (Pedro Converso)
6. AO-73 Telemeter (Greg)
7. Re: AO-95 (Zach Metzinger)
8. new JY1SAT / Jordan-OSCAR 97 TLEs (Wouter Weggelaar)
9. Re: AO-95 (Andrew Glasbrenner)
10. Fox in a Box Question (Doug Phelps)
11. Re: FoxTelem Program & RTL820T Dongles (Doug Phelps)
12. Re: FoxTelem Program & RTL820T Dongles (Burns Fisher)
----------------------------------------------------------------------
Message: 1
Date: Mon, 10 Dec 2018 17:01:06 -0600
From: Hasan al-Basri <hbasri.schiers6@?????.???>
To: Bob KD7YZ <kd7yz@???????????.??>
Cc: amsat-bb@?????.???
Subject: Re: [amsat-bb] FoxTelem Program & RTL820T Dongles
Message-ID:
<CAM4UQf2vf-BGkWqcfruqWY7zLU6FPH-Y52UgjQk+bL+VvW0i3g@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Hi Bob,
I have done that successfully with both an SDRPlay RSP2 and a FunCube Pro +.
Here is what I learned:
You must run those FM rx with squelch on. In other words, set up each SDRC
rx with FM Squelch , Narrow Filters (12 kHz is fine).
When I tried to run them unsquelched I got no decodes. Once squelched, all
decode fine if freq is clear (lots of junk on the downlink band from
computer stuff)
73, N0AN
Hasan
On Sun, Dec 9, 2018 at 4:17 PM Bob KD7YZ <kd7yz@???????????.??> wrote:
> After reading the manual from FoxTelem, I decided to thy the 192KHz wide
> suggestion they made ... the intent being to use SDR-Console/Satellite
> and the RTL820T Dongle.
>
> SDRC/Satellite is unable to auto-switch to the next in a list of Sats so
> making a bandwidth big enough to take in the lower end of one to the
> upper end of the others means, technically, 'set and forget' .
>
> I never did understand though where the Find-Sat "switch" was. I was
> hoping a strong signal somewhere in the bandwidth, which I could see was
> wide enough to cover the 4, would be enough to make the FoxTelem
> program seek out the Sat and decode it.
>
> I'd hoped to be able to activate the programs overnight and collect from
> 85 91 92 95 .
>
> It didn't work out. Though in testing, I could visually see the
> Telem/Signal come up.
>
> So is anyone using this combo willing to give me some pointers?
>
> Thanks
>
> --
> 73
> Bob KD7YZ
> AMSAT LM #901
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 2
Date: Mon, 10 Dec 2018 13:32:29 -1000
From: Gabriel Zeifman <gabrielzeifman@?????.???>
To: M Thomas <markn9um@?????.???>
Cc: amsat-bb@?????.???
Subject: Re: [amsat-bb] Skeds - KL7, DE ID ME NV RI SD VT
Message-ID:
<CAEGYLCvwMxuhfVtdwrrn1zKPR=rS73Vdi9Op62S5mOwE1762aQ@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Hi Mark,
Should be able to get you Alaska when I?m back home. I?m back on the 12th
and should be there until the 22nd.
73,
Gabe
AL6D/VE6NJH
On Mon, Dec 10, 2018 at 9:21 AM M Thomas <markn9um@?????.???> wrote:
> Hello
>
> I am looking for skeds for the following states, please. Thanks to Gabe, I
> crossed off KH6 last night.
>
> FM or linear
>
> Thanks!!!
> Mark
> N9UM
> EN52
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 3
Date: Tue, 11 Dec 2018 02:26:08 +0000 (UTC)
From: <aj9n@???.???>
To: amsat-bb@?????.???
Subject: [amsat-bb] Upcoming ARISS Contact Schedule as of 2018-12-11
02:30 UTC
Message-ID: <1763865787.2106392.1544495168430@????.?????.???>
Content-Type: text/plain; charset=UTF-8
Upcoming ARISS Contact Schedule as of 2018-12-11 02:30 UTC
Quick list of scheduled contacts and events:
?
Coll?ge L?once Bourliaguet, Thiviers, France, direct via F5KEM
The ISS callsign is presently scheduled to be OR4ISS
The scheduled astronaut is Serena Aunon-Chancellor KG5TMT
Contact was successful: Mon 2018-12-10 13:12:07 UTC 59 deg (***)
?
?
ARISS Contact Applications (United States)
?
The ARISS-US program?s education proposal window open Oct. 1 - Nov. 30, 2018
has now closed.? The next window should go open in the spring of 2019.
The ARISS webpage is at http://www.ariss.org/??
Note that there are links to other ARISS websites from this site.
?
?
?
?
ARISS Contact Applications (Europe, Africa and the Middle East)
?
Schools and Youth organizations in Europe, Africa and the Middle East
interested in setting up an ARISS radio contact with an astronaut on board
the International Space Station are invited to submit an application from
September to October and from February to April.
Please refer to details and the application form at
www.ariss-eu.org/school-contacts.? Applications should be addressed by email
to:? school.selection.manager@????????.???
?
?
?
ARISS Contact Applications (Canada, Central and South America, Asia and
Australia and Russia)
?
Organizations outside the United States can apply for an ARISS contact by
filling out an application.? Please direct questions to the appropriate
regional representative listed below. If your country is not specifically
listed, send your questions to the nearest ARISS Region listed. If you are
unsure which address to use, please send your question to the ARISS-Canada
representative; they will forward your question to the appropriate
coordinator.
?
For the application, click here.
ARISS-Canada and the Americas, except USA: Steve McFarlane, VE3TBD
ARISS-Japan, Asia, Pacific and Australia: Keigo Komuro, JA1KAB, Japan
Amateur Radio League (JARL)
ARISS-Russia: Soyuz Radioljubitelei Rossii (SRR)
?
******************************************************************************
ARISS is always glad to receive listener reports for the above contacts.?
ARISS thanks everyone in advance for their assistance.? Feel free to send
your reports to aj9n@?????.??? or aj9n@???.???.
?
Listen for the ISS on the downlink of 145.8? MHz.
?
******************************************************************************
*
?
All ARISS contacts are made via the Kenwood radio unless otherwise noted.
?
******************************************************************************
*
Several?of you have sent me emails asking about the RAC ARISS website and
not being able?to get in.? That has now been changed to?
http://www.ariss.org/
Note that there are links to other ARISS websites from this?site.
****************************************************************************
Looking?for something new to do?? How about receiving DATV from the ISS???
If interested, then please go to the ARISS-EU website for complete?
details.? Look for the buttons indicating Ham?Video.? ? ? ? ? ? ? ? ? ? ? ?
? ?
? ? ? ? ? ? ? ? ? ? ?
http://www.ariss-eu.org/? ?
?
If you need some assistance, ARISS mentor Kerry N6IZW, might be able to
provide some insight.? Contact Kerry at kbanke@?????????.???
****************************************************************************
ARISS congratulations the following mentors who have now mentored over 100
schools:?
Satoshi 7M3TJZ with 135
Francesco IK?WGF with 132
Gaston ON4WF with 123
Sergey RV3DR with 108
****************************************************************************
The?webpages listed below were all reviewed for accuracy.? Out of date
webpages?were removed, and new ones have been added.? If there are additional
ARISS?websites I need to know about, please let me know.
Note, all times?are approximate.? It is recommended that you do your own
orbital prediction?or start listening about 10 minutes before the listed
time.
All dates and?times listed follow International Standard ISO 8601 date and
time format?YYYY-MM-DD HH:MM:SS
The complete schedule page has been updated as of?2018-12-11 02:30 UTC.? (***)
Here you will find a listing of all scheduled?school contacts, and
questions, other ISS related websites, IRLP and?Echolink websites, and
instructions for any contact that may be streamed?live.??
http://www.amsat.org/amsat/ariss/news/arissnews.rtf
http://www.amsat.org/amsat/ariss/news/arissnews.txt
Total number?of ARISS ISS to earth school events is 1284. (***)
Each school counts as 1?event.
Total number of ARISS ISS to earth school contacts is 1227. ?(***)
Each contact may have multiple schools sharing the same time slot.
Total number of ARISS supported terrestrial contacts is?47.
A complete year by year breakdown of the contacts may be found in the
file.
http://www.amsat.org/amsat/ariss/news/arissnews.rtf
Please?feel free to contact me if more detailed statistics are needed.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The?following US states and entities have never had an ARISS contact:
South Dakota, Wyoming, American?Samoa, Guam, Northern Marianas Islands, and
the Virgin Islands.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
QSL?information may be found at:??
http://www.ariss.org/qsl-cards.html?
ISS callsigns:? DP?ISS, IR?ISS, NA1SS, OR4ISS,?RS?ISS
****************************************************************************
The successful school list has been updated as of 2018-12-11 02:30 UTC. (***)
http://www.amsat.org/amsat/ariss/news/Successful_ARISS_schools.rtf
Frequency? chart for packet, voice, and crossband repeater modes showing
Doppler? correction? as of 2005-07-29 04:00 UTC
http://www.amsat.org/amsat/ariss/news/ISS_frequencies_and_Doppler_correction
.rtf
Listing?of ARISS related magazine articles as of 2006-07-10 03:30 UTC.
http://www.amsat.org/amsat/ariss/news/ARISS_magazine_articles.rtf
Check out the Zoho reports of the ARISS?contacts
https://reports.zoho.com/ZDBDataSheetView.cc?DBID=412218000000020415
****************************************************************************
Exp. 56 on orbit
Serena Aunon-Chancellor KG5TMT
Alexander Gerst KF5ONO
Sergei Propopev
?
Exp. 58 on orbit
Oleg Konenenko
David St-Jacques KG5FYI
Anne McClain
?
****************************************************************************
73,
Charlie?Sufana AJ9N
One of the ARISS operation team mentors
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
------------------------------
Message: 4
Date: Mon, 10 Dec 2018 23:55:49 -0300
From: Pedro Converso <pconver@?????.???>
To: AMSAT <amsat-bb@?????.???>
Subject: [amsat-bb] AO-95 Audio1
Message-ID:
<CANTZqKn=ZDZZaKbyE5sb2jSZrph5TJ5UQ-r3sE89vpEkLrxoOA@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Over Buenos Aires 3 TLMs:
http://amsat.org.ar/1812110230.wav
73, LU7ABF, Pedro
------------------------------
Message: 5
Date: Tue, 11 Dec 2018 10:43:05 -0300
From: Pedro Converso <pconver@?????.???>
To: AMSAT <amsat-bb@?????.???>
Subject: [amsat-bb] AO-95 Audio2
Message-ID:
<CANTZqK=3Pf7N2GmGhZ+1gp6qeqJPQxd2hxdNc67s_z3-gZypxQ@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
AO-95 Audio Orb.116 13:16 UTC over Buenos Aires,
S9+10 FT-897+5elem.Yagi (3TLMs) including DUV
http://amsat.org.ar/1812111316.wav
73, LU7ABF, Pedro
------------------------------
Message: 6
Date: Tue, 11 Dec 2018 10:34:12 -0500
From: "Greg" <gwalls@?????.???>
To: "'AMSAT'" <AMSAT-BB@?????.???>
Subject: [amsat-bb] AO-73 Telemeter
Message-ID: <034e01d49166$faedd7d0$f0c98770$@?????.???>
Content-Type: text/plain; charset="us-ascii"
I copied my first telemetry from FunCube 1 back in 2016 and copied it for
several months, on and off. Then I got interested in other things and didn't
copy it for a while. Now I am back and have an anomaly that I would like to
have some advice on.
For the last few months I have not been very successful in copying
telemetry. I seem to be getting good signals with a M2 2MCP22 controlled in
AZ and EL. I use an Icom IC-910H for the receiver. I could not get dashboard
to reliably auto tune. I use HRD Satellite to tune the rig for doppler set
to 145.935. If I set the rig to USB, I don't copy anything. So just playing
around I tried CW and can hear the data but still not copy. Then I tried
adjusting the RIT and I stated copying. I only adjusted the RIT -0.65.
Should I go back to USB and adjust the frequency to find the signal?
Has the satellite changed from 145.935 or is it something here?
Thanks for your input!
73
Greg
W4GHW
------------------------------
Message: 7
Date: Tue, 11 Dec 2018 10:23:14 -0600
From: Zach Metzinger <zmetzing@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] AO-95
Message-ID: <906bf452-6175-f0c1-80a3-abfe20b3112b@?????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
On 12/9/18 6:47 PM, Andrew Glasbrenner wrote:
>
> Rest assured that we will continue to monitor the satellite for any
changes, and when the will to work the problem is a little stronger we will
seek out some mega-erp EME stations to try to wiggle the RSSI to further
diagnose the problem. Continued submission of telemetry is very important to
this end.
>
> 73, Drew, KO4MA
> AMSAT VP Operations
Hello Drew,
Does this mean that your operations team will switch focus to AO-85?
Thanks,
--- Zach
N0ZGO
------------------------------
Message: 8
Date: Tue, 11 Dec 2018 17:42:29 +0100
From: Wouter Weggelaar <wouterweg@?????.???>
To: AMSAT-BB <amsat-bb@?????.???>
Subject: [amsat-bb] new JY1SAT / Jordan-OSCAR 97 TLEs
Message-ID:
<CAKXf1rEowJ9auV2ifCnFOPH6jXt9Jx0uiBHohdGrqGF33QqF6g@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Hi All,
New TLEs have been released by CSpOC, and currently we are looking at
object 2018-099AV / 43801 for JY1Sat.
Very close are also objects AX and AY, but the coming passes will show
which one may produce a good fit.
*note* the objects have not yet been assigned, so AV is still our best
estimate. More observations are needed to confirm or amend.
73
Wouter PA3WEG
------------------------------
Message: 9
Date: Tue, 11 Dec 2018 12:17:28 -0500
From: "Andrew Glasbrenner" <glasbrenner@??????????.???>
To: "'Zach Metzinger'" <zmetzing@?????.???>, <amsat-bb@?????.???>
Subject: Re: [amsat-bb] AO-95
Message-ID: <01ae01d49175$65103870$2f30a950$@??????????.???>
Content-Type: text/plain; charset="us-ascii"
I'm just waiting for a pass when AO-85 is illuminated and I'm home, to put
her back in transponder mode. There will be some requests for operators,
mainly to not use it in eclipse. More soon.
73, Drew KO4MA
-----Original Message-----
From: AMSAT-BB <amsat-bb-bounces@?????.???> On Behalf Of Zach Metzinger
Sent: Tuesday, December 11, 2018 11:23 AM
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] AO-95
On 12/9/18 6:47 PM, Andrew Glasbrenner wrote:
>
> Rest assured that we will continue to monitor the satellite for any
changes, and when the will to work the problem is a little stronger we will
seek out some mega-erp EME stations to try to wiggle the RSSI to further
diagnose the problem. Continued submission of telemetry is very important to
this end.
>
> 73, Drew, KO4MA
> AMSAT VP Operations
Hello Drew,
Does this mean that your operations team will switch focus to AO-85?
Thanks,
--- Zach
N0ZGO
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available to all
interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 10
Date: Tue, 11 Dec 2018 19:10:46 +0000
From: Doug Phelps <DougPhelps@??????????.???>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: [amsat-bb] Fox in a Box Question
Message-ID:
<zz5dcEHk0lPWhH9L3OTwC7xwIinLVoNrlbFZ6XzZvJZtbld2pt4mWi1pkwlhi2Ku3VboUekEkedaU
oc8h2M7FqFkoYSoloB_k9lUAcl17wA=@??????????.???>
Content-Type: text/plain; charset=UTF-8
I had no problem replicating the Fox in a Box. My 3B+ runs around 70% CPU
when decoding white noise. I am having trouble receiving the satellites
because of the Spike in the center of the passband as well as images to the
side. Is there anyway to compensate for the offset voltage in LINUX that
will run on the P! 3B+? Programs like HDSDR allow you to do the correction
within the program but I cannot find where to do it in Fox Telem. There is
a Funcube control program for Windows but I have not found one for the PI.
According to the Fauncube site, alignment is required every time you loose
power to the PI.
Also, I presume that the internet interface for the leader board is not
supported? When I click on leaderboard, I get a message that it is not
supported but when I acknowledge the pop up, the web brouser launches. It
does not seem to have this problem when sending or receiving data to the
server. Is this normal.
I you would like to call me, my number is 847-514-8566. Thank you for all
of the work you put into the Fox in a Box. If I can fix the DC offset
problems, I plan to deploy one to Denver, CO and another to McAllen TX.
Sent with [ProtonMail](https://protonmail.com) Secure Email.
------------------------------
Message: 11
Date: Tue, 11 Dec 2018 19:31:54 +0000
From: Doug Phelps <DougPhelps@??????????.???>
To: Hasan al-Basri <hbasri.schiers6@?????.???>
Cc: "amsat-bb@?????.???? <amsat-bb@?????.???>, Bob KD7YZ
<kd7yz@???????????.??>
Subject: Re: [amsat-bb] FoxTelem Program & RTL820T Dongles
Message-ID:
<74zU9PgmTcTJw9jfLIl8k9BlM8TpELeu-5BT_XhI5amrxoiRAoiv6cFckOWZC9RvUEKxWyCdGzufe
ETUXUMyOldYql1y_CfCSfITlkwik0M=@??????????.???>
Content-Type: text/plain; charset=UTF-8
Sorry for the dumb question but how do I turn on the squelch in Fox Telem?
I would need to do this both on Windows and Linux (PI 3B+).
Sent with ProtonMail Secure Email.
??????? Original Message ???????
On Monday, December 10, 2018 5:01 PM, Hasan al-Basri
<hbasri.schiers6@?????.???> wrote:
> Hi Bob,
>
> I have done that successfully with both an SDRPlay RSP2 and a FunCube Pro +.
> Here is what I learned:
> You must run those FM rx with squelch on. In other words, set up each SDRC
> rx with FM Squelch , Narrow Filters (12 kHz is fine).
>
> When I tried to run them unsquelched I got no decodes. Once squelched, all
> decode fine if freq is clear (lots of junk on the downlink band from
> computer stuff)
>
> 73, N0AN
> Hasan
>
> On Sun, Dec 9, 2018 at 4:17 PM Bob KD7YZ kd7yz@???????????.?? wrote:
>
> > After reading the manual from FoxTelem, I decided to thy the 192KHz wide
> > suggestion they made ... the intent being to use SDR-Console/Satellite
> > and the RTL820T Dongle.
> > SDRC/Satellite is unable to auto-switch to the next in a list of Sats so
> > making a bandwidth big enough to take in the lower end of one to the
> > upper end of the others means, technically, 'set and forget' .
> > I never did understand though where the Find-Sat "switch" was. I was
> > hoping a strong signal somewhere in the bandwidth, which I could see was
> > wide enough to cover the 4, would be enough to make the FoxTelem
> > program seek out the Sat and decode it.
> > I'd hoped to be able to activate the programs overnight and collect from
> > 85 91 92 95 .
> > It didn't work out. Though in testing, I could visually see the
> > Telem/Signal come up.
> > So is anyone using this combo willing to give me some pointers?
> > Thanks
> > --
> > 73
> > Bob KD7YZ
> > AMSAT LM #901
> >
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership. Opinions
> > expressed
> > are solely those of the author, and do not reflect the official views of
> > AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite program!
> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 12
Date: Tue, 11 Dec 2018 16:21:28 -0500
From: Burns Fisher <burns@??????.??>
To: AMSAT BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] FoxTelem Program & RTL820T Dongles
Message-ID:
<CABX7KxWZaLL0u7Mx6yM5dhbkoVdrt1K=f7sX4Y6aHT1D0dd86Q@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Doug, Do you mean you are using a FunCube Dongle or something and having
FoxTelem decode the RF (as opposed to feeding it audio). You can turn off
the audio entirely by clicking on tab on the input section (just above the
audio/FFT display) that says "Silence Audio". If that tab says "Monitor
Audio" then it is already turned off. You can also monitor the audio and
have it squelch when there is no telemetry being decoded using a checkbox
on the side (Squelch when no telemetry" or something like that). If you
mean to use this to listen to QSOs, remember that while you might be able
to hear them sometimes, the ear is incredibly sensitive, so you might be
squelching something you could actually hear and understand.
On Tue, Dec 11, 2018 at 4:09 PM Doug Phelps via AMSAT-BB <amsat-bb@?????.???>
wrote:
> Sorry for the dumb question but how do I turn on the squelch in Fox
> Telem? I would need to do this both on Windows and Linux (PI 3B+).
>
>
> Sent with ProtonMail Secure Email.
>
> ??????? Original Message ???????
> On Monday, December 10, 2018 5:01 PM, Hasan al-Basri <
> hbasri.schiers6@?????.???> wrote:
>
> > Hi Bob,
> >
> > I have done that successfully with both an SDRPlay RSP2 and a FunCube
> Pro +.
> > Here is what I learned:
> > You must run those FM rx with squelch on. In other words, set up each
> SDRC
> > rx with FM Squelch , Narrow Filters (12 kHz is fine).
> >
> > When I tried to run them unsquelched I got no decodes. Once squelched,
> all
> > decode fine if freq is clear (lots of junk on the downlink band from
> > computer stuff)
> >
> > 73, N0AN
> > Hasan
> >
> > On Sun, Dec 9, 2018 at 4:17 PM Bob KD7YZ kd7yz@???????????.?? wrote:
> >
> > > After reading the manual from FoxTelem, I decided to thy the 192KHz
> wide
> > > suggestion they made ... the intent being to use SDR-Console/Satellite
> > > and the RTL820T Dongle.
> > > SDRC/Satellite is unable to auto-switch to the next in a list of Sats
> so
> > > making a bandwidth big enough to take in the lower end of one to the
> > > upper end of the others means, technically, 'set and forget' .
> > > I never did understand though where the Find-Sat "switch" was. I was
> > > hoping a strong signal somewhere in the bandwidth, which I could see
> was
> > > wide enough to cover the 4, would be enough to make the FoxTelem
> > > program seek out the Sat and decode it.
> > > I'd hoped to be able to activate the programs overnight and collect
> from
> > > 85 91 92 95 .
> > > It didn't work out. Though in testing, I could visually see the
> > > Telem/Signal come up.
> > > So is anyone using this combo willing to give me some pointers?
> > > Thanks
> > > --
> > > 73
> > > Bob KD7YZ
> > > AMSAT LM #901
> > >
> > > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> > > to all interested persons worldwide without requiring membership.
> Opinions
> > > expressed
> > > are solely those of the author, and do not reflect the official views
> of
> > > AMSAT-NA.
> > > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions expressed
> > are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@?????.???.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 13, Issue 414
*****************************************
Read previous mail | Read next mail
| |
