| |
CX2SA > SATDIG 09.09.19 21:07l 520 Lines 16344 Bytes #999 (0) @ WW
BID : AMSATBB14341
Read: GUEST
Subj: AMSAT-BB-digest V14 341
Path: IW8PGT<HB9ON<IK7NXU<IK6IHL<IZ3LSV<I0OJJ<VE2PKT<N3HYM<CX2SA
Sent: 190906/2305Z @:CX2SA.SAL.URY.SOAM #:13555 [Salto] FBB7.00e $:AMSATBB14341
>From cx2sa%cx2sa.sal.ury.soam@i0ojj.ampr.org Sat Sep 7 01:13:33 2019
Received: from i0ojj.ampr.org by i0ojj.ampr.org (JNOS2.0k.3b2) with SMTP
id AA26339 ; Sat, 07 Sep 2019 01:13:33 +0200
Message-Id: <AMSATBB14341@ve2pkt.bbs>
>From: cx2sa@cx2sa.sal.ury.soam
X-JNOS-User-Port: Telnet (ve2pkt @ 144.172.216.109) -> Sending message
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. ICOM IC821H (alex weimer)
2. BugSat-1 (Tita) and its digipeater (Hans BX2ABT)
3. DM02 Satellite Expedition Sunday Sept 22 - N6O/mm (Ron Bondy)
4. Re: BugSat-1 (Tita) and its digipeater (Amsat Argentina)
5. Re: BugSat-1 (Tita) and its digipeater (Amsat Argentina)
6. BugSat-1 (Tita) and its digipeater (Amsat Argentina)
7. Bugsat-1 / Tita object number? (k.swaggart@???????.????
8. Re: Bugsat-1 / Tita object number? (Pedro Converso)
9. simple 70cm/2M dipole/SATPC32 (RG)
10. Re: BugSat-1 (Tita) and its digipeater (Robert MacHale)
11. rotor computer interface (Mike Seguin)
12. Re: simple 70cm/2M dipole/SATPC32 (k6vug@?????????.????
13. Re: simple 70cm/2M dipole/SATPC32 (k6vug@?????????.????
14. Re: rotor computer interface (David Pykett)
----------------------------------------------------------------------
Message: 1
Date: Fri, 6 Sep 2019 10:53:54 -0400 (EDT)
From: alex weimer <ingejack@???.???>
To: amsat-bb@?????.???
Subject: [amsat-bb] ICOM IC821H
Message-ID: <186409.2699.1567781634942@???????.???.???>
Content-Type: text/plain; charset=UTF-8
If interested please contact me via EMAIL for the IC821H Thanks JACK KC7MG
------------------------------
Message: 2
Date: Fri, 6 Sep 2019 23:11:27 +0800
From: Hans BX2ABT <hans.bx2abt@???.?????.???>
To: AMSAT <amsat-bb@?????.???>
Subject: [amsat-bb] BugSat-1 (Tita) and its digipeater
Message-ID: <e3841708-b26c-2fbe-693f-f757f8b3323e@???.?????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
I was successful in decoding some telemetry frames from BugSat-1 (Tita)
today. I've googled this bird, but not much information apart from the
lauch in 2014. There was mention about a digipeater on board, but no
mention if it was ever turned on or if it malfunctioned. Does anybody
remember anything about this sat and its aftermath after launch?
73 de Hans
BX2ABT
------------------------------
Message: 3
Date: Fri, 6 Sep 2019 15:40:32 +0000 (UTC)
From: Ron Bondy <ad0dx@?????.???>
To: AMSAT BB <amsat-bb@?????.???>
Subject: [amsat-bb] DM02 Satellite Expedition Sunday Sept 22 - N6O/mm
Message-ID: <106184062.2215143.1567784432813@????.?????.???>
Content-Type: text/plain; charset=UTF-8
Alex N7AGF and Ron AD0DX are planning to activate DM02 on Sunday Sept 22,
2019 on FM and Linear satellites.
It's a 5 or 6 hour boat trip to anchor off San Clemente Island.? We will be
on the water for 22 hours and operating around 10 hoursbeginning around 3AM
Pacific (1000z) Sunday sept 22nd.
The cost of the boat is $2500 and we would appreciate contributions to help
offset this cost.? In the 24 hours after posting to Twitter we have received
around $1300 which Alex and I are very thankful for.??
The island has Verizon and AT&T and Alex has a Garmin InReach so we should
be able to tweet passes.? The plan is to make as many passes as possible
once we start operating around 3am PAC.? We may skip some of the low western
passes.
We will be using N6O/mm and we have a qrz.com page with all the details:?N6O
Callsign Page
|
|
|
| | |
|
|
|
| |
N6O Callsign Page
N6O personal biography
|
|
|
If you need the grid please give us a call!
Of course this is dependent on the weather, but the captain says it has been
a good Sept so far.
If you are able to contribute financially we really appreciate the help to
offset some of our costs.? Details to contribute are on the N6O qrz.com
webpage.
Thanks and 73,
Ron AD0DX (and Alex N7AGF)
------------------------------
Message: 4
Date: Fri, 6 Sep 2019 18:00:15 +0000 (UTC)
From: Amsat Argentina <lu7aa@?????.???>
To: "hans.bx2abt@???.?????.???? <hans.bx2abt@???.?????.???>
Cc: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: Re: [amsat-bb] BugSat-1 (Tita) and its digipeater
Message-ID: <672043433.3383426.1567792815143@????.?????.???>
Content-Type: text/plain; charset=UTF-8
Hello Hans,
Thanks for decoding TITA Tlm.
Tita digi is active at 9K6 AFSK, call=LU7AA, also a ?DX? command should give
stations heard.
Passes & Frequencies at http://amsat.org.ar/pass?satx=tita Pwr is 2W.
Good Luck !
73, LU7AA, AMSAT Argentina
http://amsat.org.ar
------------------------------
Message: 5
Date: Fri, 6 Sep 2019 18:03:25 +0000 (UTC)
From: Amsat Argentina <lu7aa@?????.???>
To: "hans.bx2abt@???.?????.???? <hans.bx2abt@???.?????.???>
Cc: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: Re: [amsat-bb] BugSat-1 (Tita) and its digipeater
Message-ID: <1690212071.3420981.1567793005679@????.?????.???>
Content-Type: text/plain; charset=UTF-8
Hello Hans,
Thanks for decoding TITA Tlm.
Tita digi is active at 9K6 AFSK, call=LU7AA, also a ?DX? command should give
stations heard.
Passes & Frequencies at http://amsat.org.ar/pass?satx=tita Pwr is 2W.
Good Luck !
73, LU7AA, AMSAT Argentina
http://amsat.org.ar
------------------------------
Message: 6
Date: Fri, 6 Sep 2019 18:16:54 +0000 (UTC)
From: Amsat Argentina <lu7aa@?????.???>
To: "hans.bx2abt@???.?????.???? <hans.bx2abt@???.?????.???>
Cc: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: [amsat-bb] BugSat-1 (Tita) and its digipeater
Message-ID: <1255520639.3414020.1567793814210@????.?????.???>
Content-Type: text/plain; charset=UTF-8
Hello Hans,
Thanks for decoding TITA Tlm.
Tita digi is active at 9K6 AFSK, call=LU7AA, also a ?DX? command should give
stations heard.
Passes & Frequencies at http://amsat.org.ar/pass?satx=tita Pwr is 2W.
Good Luck !
73, LU7AA, AMSAT Argentina
http://amsat.org.ar
------------------------------
Message: 7
Date: Fri, 6 Sep 2019 12:24:36 -0700
From: <k.swaggart@???????.???>
To: <AMSAT-BB@?????.???>
Subject: [amsat-bb] Bugsat-1 / Tita object number?
Message-ID: <024501d564e8$b90042d0$2b00c870$@???????.???>
Content-Type: text/plain; charset="us-ascii"
What is BugSat-1 (Tita) object number? Can't find it in the AMSAT kep file.
Tnx,
Ken, W7KKE
------------------------------
Message: 8
Date: Fri, 6 Sep 2019 17:05:50 -0300
From: Pedro Converso <pconver@?????.???>
To: Ken Swaggart <k.swaggart@???????.???>
Cc: AMSAT-BB@?????.???
Subject: Re: [amsat-bb] Bugsat-1 / Tita object number?
Message-ID:
<CANTZqKkd6hVYZTmNt1vRkQ68uL7VqWVSTCMK_dy1Tgsao90gWw@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Tita is object # 40014, on http://amsat.org.ar/pass?satx=tita are freqs &
keps on +/- keps
73, lu7abf, Pedro
El vie., 6 de septiembre de 2019 16:27, Ken Swaggart W7KKE via AMSAT-BB <
amsat-bb@?????.???> escribi?:
> What is BugSat-1 (Tita) object number? Can't find it in the AMSAT kep file.
>
> Tnx,
>
> Ken, W7KKE
>
>
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 9
Date: Fri, 6 Sep 2019 21:31:46 +0000 (UTC)
From: RG <marzo7088@?????.???>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: [amsat-bb] simple 70cm/2M dipole/SATPC32
Message-ID: <1220032747.2333916.1567805506472@????.?????.???>
Content-Type: text/plain; charset=UTF-8
I was wondering if anyone has plans for a simple 2M/70CM wire dipole.I want
something easy that will? hold up outdoors.It would be for receive only for
full duplex.If wire dipoles are out as I dont see them, a simple one from
easy to make materials.The wire would be easy as the install is easier for
me.Also I can't seem to get my ICoM 706 to work on SATPC32 for TX only.Works
fine? when set to same address for TX/RX.Thanks?Rich
marzo7088@?????.???
------------------------------
Message: 10
Date: Fri, 6 Sep 2019 21:42:05 +0000 (UTC)
From: Robert MacHale <robert.machale@?????.???>
To: "hans.bx2abt@???.?????.???? <hans.bx2abt@???.?????.???>, Amsat
Argentina <lu7aa@?????.???>
Cc: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: Re: [amsat-bb] BugSat-1 (Tita) and its digipeater
Message-ID: <1591931743.3507543.1567806125297@????.?????.???>
Content-Type: text/plain; charset=UTF-8
Here is the first packet from LU7AA, according to aprs.fi:
2019-09-06 14:11:35
PDT:?LU7AA>CQ,qAO,W7KKE-14:<0xef><0xbf><0xbd><0xef><0xbf><0xbd><0xef><0xbf><0x
bd><0x00><0x01><0x00><0x00>;x]<0xef><0xbf><0xbd>?
For reference, see:?https://aprs.fi/?c=raw&call=LU7AA&limit=1000&view=normal
I added LU7AA to our data feed tracking all Satellite APRS Packets (1200 and
9600):
Feel free to give this a test drive:?http://www.spacecommunicator.club/aprs/
On the next pass, in about an hour, I would expect to see packets iGated
again via Ken (W7KKE) at 9600 bps.
Also, Scott (K4KDR) iGates 9600 bps packets on the East Coast.
73
Robert MacHale. KE6BLR Ham Radio License.?http://spaceCommunicator.club/aprs?
. Supporting Boy Scout Merit Badges in Radio, Robotics, and Space Exploration
On Friday, September 6, 2019, 11:18:32 AM PDT, Amsat Argentina via
AMSAT-BB <amsat-bb@?????.???> wrote:
Hello Hans,
Thanks for decoding TITA Tlm.
Tita digi is active at 9K6 AFSK, call=LU7AA, also a ?DX? command should give
stations heard.
Passes & Frequencies at http://amsat.org.ar/pass?satx=tita Pwr is 2W.
Good Luck !
73, LU7AA, AMSAT Argentina
http://amsat.org.ar
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 11
Date: Fri, 6 Sep 2019 18:29:25 -0400
From: Mike Seguin <n1jez@?????????????????.???>
To: AMSAT BB <amsat-bb@?????.???>
Subject: [amsat-bb] rotor computer interface
Message-ID:
<0066b939-0971-6d8a-4db6-ce51f82cf571@?????????????????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
What are folks using now to control a G5400B rotor system with SatPC32?
I have my trusty SatTracker 688 from WA8SME, but that is no longer
available.
--
73,
Mike, N1JEZ
"A closed mouth gathers no feet"
------------------------------
Message: 12
Date: Fri, 6 Sep 2019 22:51:23 +0000 (UTC)
From: "k6vug@?????????.???? <k6vug@?????????.???>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>, RG
<marzo7088@?????.???>
Subject: Re: [amsat-bb] simple 70cm/2M dipole/SATPC32
Message-ID: <1846894197.2365138.1567810283438@????.?????.???>
Content-Type: text/plain; charset=UTF-8
Hi Rich,
I have a IC-7000, quite similar radio and it works fine here. So the one
thing I can think of is the Mode Menu settings.
73!Umesh
On Friday, September 6, 2019, 2:32:32 PM PDT, RG via AMSAT-BB
<amsat-bb@?????.???> wrote:
I was wondering if anyone has plans for a simple 2M/70CM wire dipole.I want
something easy that will? hold up outdoors.It would be for receive only for
full duplex.If wire dipoles are out as I dont see them, a simple one from
easy to make materials.The wire would be easy as the install is easier for
me.Also I can't seem to get my ICoM 706 to work on SATPC32 for TX only.Works
fine? when set to same address for TX/RX.Thanks?Rich
marzo7088@?????.???
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 13
Date: Fri, 6 Sep 2019 22:55:42 +0000 (UTC)
From: "k6vug@?????????.???? <k6vug@?????????.???>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>, RG
<marzo7088@?????.???>
Subject: Re: [amsat-bb] simple 70cm/2M dipole/SATPC32
Message-ID: <1779496202.2350981.1567810542599@????.?????.???>
Content-Type: text/plain; charset=UTF-8
Please ignore my last, I re-read your email and I see the issue.
- Umesh
On Friday, September 6, 2019, 3:52:13 PM PDT, k6vug--- via AMSAT-BB
<amsat-bb@?????.???> wrote:
Hi Rich,
I have a IC-7000, quite similar radio and it works fine here. So the one
thing I can think of is the Mode Menu settings.
73!Umesh
? ? On Friday, September 6, 2019, 2:32:32 PM PDT, RG via AMSAT-BB
<amsat-bb@?????.???> wrote:?
I was wondering if anyone has plans for a simple 2M/70CM wire dipole.I want
something easy that will? hold up outdoors.It would be for receive only for
full duplex.If wire dipoles are out as I dont see them, a simple one from
easy to make materials.The wire would be easy as the install is easier for
me.Also I can't seem to get my ICoM 706 to work on SATPC32 for TX only.Works
fine? when set to same address for TX/RX.Thanks?Rich
marzo7088@?????.???
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
?
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 14
Date: Fri, 6 Sep 2019 23:00:06 +0000
From: David Pykett <G0IIQ@???????.???>
To: "n1jez@?????????????????.???? <n1jez@?????????????????.???>, AMSAT
BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] rotor computer interface
Message-ID:
<DB6PR0501MB28236721A224E78C6306AE3BFABA0@???????????????.????????.????.??????
?.???>
Content-Type: text/plain; charset="Windows-1252"
I use the ERC-M works great, you do have to build it but it isn?t difficult
to build.
73
Dave G0IIQ
73
Dave G0IIQ
________________________________
From: AMSAT-BB <amsat-bb-bounces@?????.???> on behalf of Mike Seguin via
AMSAT-BB <amsat-bb@?????.???>
Sent: Friday, September 6, 2019 11:29:25 PM
To: AMSAT BB <amsat-bb@?????.???>
Subject: [amsat-bb] rotor computer interface
What are folks using now to control a G5400B rotor system with SatPC32?
I have my trusty SatTracker 688 from WA8SME, but that is no longer
available.
--
73,
Mike, N1JEZ
"A closed mouth gathers no feet"
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@?????.???.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 14, Issue 341
*****************************************
Read previous mail | Read next mail
| |
