| |
CX2SA > SATDIG 31.10.19 12:48l 991 Lines 32819 Bytes #999 (0) @ WW
BID : AMSATBB14392
Read: GUEST
Subj: AMSAT-BB-digest V14 392
Path: IW8PGT<I3XTY<I0OJJ<I0OJJ<N6RME<CX2SA
Sent: 191031/1043Z @:CX2SA.SAL.URY.SOAM #:17064 [Salto] FBB7.00e $:AMSATBB14392
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. ARISS News Release No. 19-17 (n4csitwo@?????????.????
2. Re: FOX Telemetry upgrade problem (gw1fky@???.????
3. Re: FOX Telemetry upgrade problem (Burns Fisher)
4. Re: LDPC for FPGAs to do DVB-S2/X on SDRs - so many letters!
What does it mean? (Joseph B. Fitzgerald)
5. Re: FOX Telemetry upgrade problem (Chris Thompson)
6. Re: IC-9700 & foxtelem 1.08p (Chris Thompson)
7. Re: FOX Telemetry upgrade problem (Chris Thompson)
8. Re: FOX Telemetry upgrade problem (gw1fky@???.????
9. Re: IC-9700 & foxtelem 1.08p (Kevin)
10. Re: IC-9700 & FoxTelem 1.08p (Alan)
----------------------------------------------------------------------
Message: 1
Date: Wed, 30 Oct 2019 14:01:06 -0400
From: <n4csitwo@?????????.???>
To: <amsat-bb@?????.???>
Subject: [amsat-bb] ARISS News Release No. 19-17
Message-ID: <02E87077881A47449488CF9949B8C282@???>
Content-Type: text/plain; charset="iso-8859-1"
ARISS News Release
No. 19-17
Dave Jordan, AA4KN
ARISS PR
Oct. 30, 2019
Message to US Educators
Amateur Radio on the International Space Station
Contact Opportunity
Call for Proposals
Current Proposal Window is October 1, 2019 to November 30, 2019
Upcoming Proposal Window is February 1, 2020 to March 31, 2020
The Amateur Radio on the International Space Station (ARISS) Program is
seeking formal and informal education institutions and organizations,
individually or working together, to host an Amateur Radio contact with a
crew member on board the ISS. ARISS anticipates that the contact for
proposals submitted in the proposal window now open would be held between
July 1, 2020 and December 31, 2020. ARISS is happy to announce a second
proposal window will open February 1, 2020 for contacts that would be held
between January 1, 2021 and June 30, 2021. Crew scheduling and ISS orbits
will determine the exact contact dates. To maximize these radio contact
opportunities, ARISS is looking for organizations that will draw large
numbers of participants and integrate the contact into a well-developed
education plan.
The deadline to submit proposals for contacts between July 1, 2020 and
December 31, 2020 is November 30, 2019. The proposal window for contacts
between January 1, 2021 and June 30, 2021 will open on February 1, 2020 and
close on March 31, 2020. Proposal information and documents can be found at
www.ariss.org. Two ARISS Introductory Webinar sessions will be held on
November 7, 2019. The first is at 6:00 PM ET and the second is at 9:00 PM
ET. The same material will be covered during both sessions, so choose the
session that best fits your schedule. The Eventbrite link to sign up is
https://ariss-introductory-webinar-fall-2019.eventbrite.com .
The Opportunity
Crew members aboard the International Space Station will participate in
scheduled Amateur Radio contacts. These radio contacts are approximately 10
minutes in length and allow students to interact with the astronauts through
a question-and-answer session.
An ARISS contact is a voice-only communication opportunity via Amateur Radio
between astronauts and cosmonauts aboard the space station and classrooms
and communities. ARISS contacts afford education audiences the opportunity
to learn firsthand from astronauts what it is like to live and work in space
and to learn about space research conducted on the ISS. Students also will
have an opportunity to learn about satellite communication, wireless
technology, and radio science. Because of the nature of human spaceflight
and the complexity of scheduling activities aboard the ISS, organizations
must demonstrate flexibility to accommodate changes in dates and times of
the radio contact.
Amateur Radio organizations around the world with the support of NASA and
space agencies in Russia, Canada, Japan and Europe present educational
organizations with this opportunity. The ham radio organizations' volunteer
efforts provide the equipment and operational support to enable
communication between crew on the ISS and students around the world using
Amateur Radio.
More Information
For proposal information and more details such as expectations, proposal
guidelines and proposal form, and dates and times of Information Webinars,
go to www.ariss.org.
Please direct any questions to ariss.us.education@?????.??? .
About ARISS:
Amateur Radio on the International Space Station (ARISS) is a cooperative
venture of international amateur radio societies and the space agencies that
support the International Space Station (ISS). In the United States,
sponsors are the Radio Amateur Satellite Corporation (AMSAT), the American
Radio Relay League (ARRL), the ISS National Lab and National Aeronautics and
Space Administration (NASA). The primary goal of ARISS is to promote
exploration of science, technology, engineering, and mathematics (STEAM)
topics by organizing scheduled contacts via amateur radio between crew
members aboard the ISS and students in classrooms or public forms. Before
and during these radio contacts, students, educators, parents, and
communities learn about space, space technologies, and amateur radio. For
more information, see www.ariss.org.
Media Contact:
Dave Jordan, AA4KN
ARISS PR
aa4kn@?????.???
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
------------------------------
Message: 2
Date: Wed, 30 Oct 2019 18:09:44 +0000 (UTC)
From: gw1fky@???.???
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] FOX Telemetry upgrade problem
Message-ID: <736753976.4597453.1572458984417@????.?????.???>
Content-Type: text/plain; charset=UTF-8
HiIt might mot be the answer but when I installed the upgrade I had the same
problems.I noticed that the "FPSK" box was checked -? I changed the setting
to? "FSK" and it now is working fine.Ken EatonGW1FKY
------------------------------
Message: 3
Date: Wed, 30 Oct 2019 14:41:43 -0400
From: Burns Fisher <wb1fj-bb@??????.??>
To: gw1fky@???.???
Cc: AMSAT BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] FOX Telemetry upgrade problem
Message-ID:
<CABX7KxV3yUwwVoW52EyPTrzcK5q4fbKEjZk-9dMOKObrEbtRuA@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
I think you mean *B*PSK, but I know what you mean. If you are letting
FoxTelem track the satellites, you can also check "auto switch" so that
FoxTelem will switch to the correct mode and band for the (Fox) satellite
that is coming over.
Was this post in response to the question about using the IC9700 IQ mode?
On Wed, Oct 30, 2019 at 2:14 PM gw1fky--- via AMSAT-BB <amsat-bb@?????.???>
wrote:
> HiIt might mot be the answer but when I installed the upgrade I had the
> same problems.I noticed that the "FPSK" box was checked - I changed the
> setting to "FSK" and it now is working fine.Ken EatonGW1FKY
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 4
Date: Wed, 30 Oct 2019 19:04:35 +0000
From: "Joseph B. Fitzgerald" <jfitzgerald@????.???.???>
To: AMSAT BB <amsat-bb@?????.???>, Michelle Thompson
<mountain.michelle@?????.???>
Subject: Re: [amsat-bb] LDPC for FPGAs to do DVB-S2/X on SDRs - so
many letters! What does it mean?
Message-ID:
<MWHPR2201MB1645A9851954F49B9DAEBA9987600@???????????????.????????.????.??????
?.???>
Content-Type: text/plain; charset="Windows-1252"
________________________________
> LDPC stands for low density parity check coding.
I suppose I am a little biased since I am writing this from Cambridge, MA,
but it is too bad we don't call it "Gallager Coding"
http://news.mit.edu/2010/gallager-codes-0121
[http://news.mit.edu/sites/mit.edu.newsoffice/files/styles/og/public/images/20
10/20100120160942-1.jpg]<http://news.mit.edu/2010/gallager-codes-0121>
Explained: Gallager codes | MIT
News<http://news.mit.edu/2010/gallager-codes-0121>
In 1993, scientists achieved the maximum rate for data transmission ? only
to find they?d been scooped 30 years earlier by an MIT grad student.
news.mit.edu
de KM1P
------------------------------
Message: 5
Date: Wed, 30 Oct 2019 16:47:37 -0400
From: Chris Thompson <g0kla@????.???>
To: Burns Fisher <wb1fj-bb@??????.??>
Cc: AMSAT BB <amsat-bb@?????.???>, gw1fky@???.???
Subject: Re: [amsat-bb] FOX Telemetry upgrade problem
Message-ID:
<CAJOf0+s1+9+2DayR9QZd_HPT-UQg=CT3hM+8sid_0VfSu6MgZw@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
If anyone else is seeing an issue with FoxTelem 1.08p, then please send me
an email.
I am currently aware of two problems:
1. A message at start that says "Something is preventing FoxTelem from
running". I have a fix for this and it is being tested.
2. An issue when running in IQ mode and reading data from the soundcard
from a radio like the IC 9700. It seems that nothing decodes or the decode
rate is very low.
If you are seeing either of these issues or any other problems please let
me know.
If you got into a pickle and can't seem to go back to 1.07, then I can
explain how to do that. You just need to replace the spacecraft.dat files
with the old ones, or remove them so that 1.07 installs them fresh. Send
me an email if you need instructions.
73
Chris
On Wed, Oct 30, 2019 at 2:44 PM Burns Fisher via AMSAT-BB <
amsat-bb@?????.???> wrote:
> I think you mean *B*PSK, but I know what you mean. If you are letting
> FoxTelem track the satellites, you can also check "auto switch" so that
> FoxTelem will switch to the correct mode and band for the (Fox) satellite
> that is coming over.
>
> Was this post in response to the question about using the IC9700 IQ mode?
>
> On Wed, Oct 30, 2019 at 2:14 PM gw1fky--- via AMSAT-BB <amsat-bb@?????.???
> >
> wrote:
>
> > HiIt might mot be the answer but when I installed the upgrade I had the
> > same problems.I noticed that the "FPSK" box was checked - I changed the
> > setting to "FSK" and it now is working fine.Ken EatonGW1FKY
> > _______________________________________________
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions
> > expressed
> > are solely those of the author, and do not reflect the official views of
> > AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
> >
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Chris E. Thompson
chrisethompson@?????.???
g0kla@????.???
------------------------------
Message: 6
Date: Wed, 30 Oct 2019 16:59:33 -0400
From: Chris Thompson <g0kla@????.???>
To: jeff griffin <kb2m@????.???>
Cc: AMSAT <amsat-bb@?????.???>
Subject: Re: [amsat-bb] IC-9700 & foxtelem 1.08p
Message-ID:
<CAJOf0+vCYYdg9WYOLU+mKmdtQq8PfSgJsmupFh=WbKNXCiEfNA@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
I have tried to reproduce this, but I do not have a 9700 so it is hard. So
far I can not work out what is wrong.
Can someone describe the setup with the 9700? How is the audio read into
the computer and sent to FoxTelem? Is FoxTelem reading it from a sound
card? Or what looks like a sound card?
Can someone use Audacity and record some audio for me to test with? Try to
record it at the sample rate you use in FoxTelem. e.g. if you set FoxTelem
to IQ and 48000 samples per second, then set Audacity to 48000 too.
thanks
Chris
On Wed, Oct 30, 2019 at 1:23 PM jeff griffin via AMSAT-BB <
amsat-bb@?????.???> wrote:
> I'm going to wait for the fix for the 9700. In the meantime I'm now
> collecting telemetry with my FIAB with a eggbeater antenna setup that I'm
> going to leave up here for the winter. I'm seeing a much better decode rate
> with 1.08p over 1.07y, about 2 to 1. So I'm seeing 1.08 is clearly better
> then 1.07. Thanks Chris!
>
> 73 Jeff kb2m
>
> -----Original Message-----
> From: AMSAT-BB [mailto:amsat-bb-bounces@?????.???? On Behalf Of Kevin via
> AMSAT-BB
> Sent: Wednesday, October 30, 2019 12:54 PM
> To: amsat-bb@?????.???
> Subject: Re: [amsat-bb] IC-9700 & foxtelem 1.08p
>
> Hi Alan and everyone else that replied,
>
> Windows Sinc also has zero decodes, tried all decoder modes.
>
> for now 1.07y FTW
>
> Thanks
> Kevin
>
>
> On 10/29/2019 23:20, Alan wrote:
> >
> > I you are using the Raised Cosine decoder, try the Windows Sinc instead.
> >
> > 73,
> >
> > Alan
> >
> > WA4SCA
> >
> > *From: *Kevin via AMSAT-BB <mailto:amsat-bb@?????.???>
> > *Sent: *Wednesday, October 30, 2019 12:21 AM
> > *To: *amsat-bb@?????.??? <mailto:amsat-bb@?????.???>
> > *Subject: *[amsat-bb] IC-9700 & foxtelem 1.08p
> >
> > Hi All,
> >
> > Any IC-9700 users out there that have switched to foxtelem 1.08p
> >
> > using USB and IQ mode? I see a good eye but get zero decodes, dropping
> >
> > back to 1.07y and it all starts working again.
> >
> > 73
> >
> > Kevin WA7FWF
> >
> > _______________________________________________
> >
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> >
> > to all interested persons worldwide without requiring membership.
> > Opinions expressed
> >
> > are solely those of the author, and do not reflect the official views
> > of AMSAT-NA.
> >
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> >
> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
> >
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Chris E. Thompson
chrisethompson@?????.???
g0kla@????.???
------------------------------
Message: 7
Date: Wed, 30 Oct 2019 17:07:33 -0400
From: Chris Thompson <g0kla@????.???>
To: Burns Fisher <wb1fj-bb@??????.??>
Cc: AMSAT BB <amsat-bb@?????.???>, gw1fky@???.???
Subject: Re: [amsat-bb] FOX Telemetry upgrade problem
Message-ID:
<CAJOf0+sJ4BvxayhjJzxAzSZGS-d7pZNL9qa6DnSNB=PJ+tdA+g@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
If you are seeing the issue "Something is preventing FoxTelem from running"
then download 1.08q from here:
http://amsat.us/FoxTelem/windows/
http://amsat.us/FoxTelem/linux/
http://amsat.us/FoxTelem/mac/
You can also patch any of the installations by replacing the jar file in
your 1.08 install directory with this one:
http://amsat.us/FoxTelem/test/FoxTelem.jar
Let me know if this fixes a problem for you.
73
Chris
On Wed, Oct 30, 2019 at 4:47 PM Chris Thompson <g0kla@????.???> wrote:
> If anyone else is seeing an issue with FoxTelem 1.08p, then please send me
> an email.
>
> I am currently aware of two problems:
> 1. A message at start that says "Something is preventing FoxTelem from
> running". I have a fix for this and it is being tested.
> 2. An issue when running in IQ mode and reading data from the soundcard
> from a radio like the IC 9700. It seems that nothing decodes or the decode
> rate is very low.
>
> If you are seeing either of these issues or any other problems please let
> me know.
>
> If you got into a pickle and can't seem to go back to 1.07, then I can
> explain how to do that. You just need to replace the spacecraft.dat files
> with the old ones, or remove them so that 1.07 installs them fresh. Send
> me an email if you need instructions.
>
> 73
> Chris
>
> On Wed, Oct 30, 2019 at 2:44 PM Burns Fisher via AMSAT-BB <
> amsat-bb@?????.???> wrote:
>
>> I think you mean *B*PSK, but I know what you mean. If you are letting
>> FoxTelem track the satellites, you can also check "auto switch" so that
>> FoxTelem will switch to the correct mode and band for the (Fox) satellite
>> that is coming over.
>>
>> Was this post in response to the question about using the IC9700 IQ mode?
>>
>> On Wed, Oct 30, 2019 at 2:14 PM gw1fky--- via AMSAT-BB <
>> amsat-bb@?????.???>
>> wrote:
>>
>> > HiIt might mot be the answer but when I installed the upgrade I had the
>> > same problems.I noticed that the "FPSK" box was checked - I changed the
>> > setting to "FSK" and it now is working fine.Ken EatonGW1FKY
>> > _______________________________________________
>> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> > to all interested persons worldwide without requiring membership.
>> Opinions
>> > expressed
>> > are solely those of the author, and do not reflect the official views of
>> > AMSAT-NA.
>> > Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>> >
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>
>
>
> --
> Chris E. Thompson
> chrisethompson@?????.???
> g0kla@????.???
>
--
Chris E. Thompson
chrisethompson@?????.???
g0kla@????.???
------------------------------
Message: 8
Date: Wed, 30 Oct 2019 21:32:50 +0000 (UTC)
From: gw1fky@???.???
To: g0kla@????.???? wb1fj-bb@??????.??
Cc: amsat-bb@?????.???
Subject: Re: [amsat-bb] FOX Telemetry upgrade problem
Message-ID: <1179439694.4716858.1572471170246@????.?????.???>
Content-Type: text/plain; charset=UTF-8
Thanks for the reply and correction from Burns to the "typo" in my message.I
was just responding with my observation and to confirm that the update
worked OK with my change of setting.Also note I did not have the "Auto Mode
" selected and secondly I use a "Funcube" dongle and do not have an IC 9700
as others were commenting about.Much appreciate your time and effort Chris
with your valuable contributions of software to enhance the hobby.73Ken
EatonGW1FKY
-----Original Message-----
From: Chris Thompson <g0kla@????.???>
To: Burns Fisher <wb1fj-bb@??????.??>
CC: gw1fky <gw1fky@???.???>; AMSAT BB <amsat-bb@?????.???>
Sent: Wed, 30 Oct 2019 21:08
Subject: Re: [amsat-bb] FOX Telemetry upgrade problem
If you are seeing the issue "Something is preventing FoxTelem from running"
then download 1.08q from
here:http://amsat.us/FoxTelem/windows/?http://amsat.us/FoxTelem/linux/http://a
msat.us/FoxTelem/mac/
You can also patch any of the installations by replacing the jar file in
your 1.08 install directory with this
one:http://amsat.us/FoxTelem/test/FoxTelem.jar
Let me know if this fixes a problem for you.
73Chris?
On Wed, Oct 30, 2019 at 4:47 PM Chris Thompson <g0kla@????.???> wrote:
If anyone else is seeing an issue with FoxTelem 1.08p, then please send me
an email.??
I am currently aware of two problems:1. A message at start that says
"Something is preventing FoxTelem from running". I have a fix for this and
it is being tested.2. An issue when running in IQ mode and reading data from
the soundcard from a radio like the IC 9700.? It seems that nothing decodes
or the decode rate is very low.
If you are seeing either of these issues or any other problems please let me
know.
If you got into a pickle and can't seem to go back to 1.07, then I can
explain how to do that.? You just need to replace the spacecraft.dat files
with the old ones, or remove them so that 1.07 installs them fresh.? Send me
an email if you need instructions.
73Chris
On Wed, Oct 30, 2019 at 2:44 PM Burns Fisher via AMSAT-BB
<amsat-bb@?????.???> wrote:
I think you mean *B*PSK, but I know what you mean.? If you are letting
FoxTelem track the satellites, you can also check "auto switch" so that
FoxTelem will switch to the correct mode and band for the (Fox) satellite
that is coming over.
Was this post in response to the question about using the IC9700 IQ mode?
On Wed, Oct 30, 2019 at 2:14 PM gw1fky--- via AMSAT-BB <amsat-bb@?????.???>
wrote:
> HiIt might mot be the answer but when I installed the upgrade I had the
> same problems.I noticed that the "FPSK" box was checked -? I changed the
> setting to? "FSK" and it now is working fine.Ken EatonGW1FKY
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
--
Chris E. Thompson
chrisethompson@?????.???
g0kla@????.???
--
Chris E. Thompson
chrisethompson@?????.???
g0kla@????.???
------------------------------
Message: 9
Date: Wed, 30 Oct 2019 20:45:12 -0700
From: Kevin <wa7fwf@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] IC-9700 & foxtelem 1.08p
Message-ID: <31a813c4-ea7e-2555-fca8-e38bc4f6cd98@?????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
Chris,
? The 9700 outputs a 12khz IF signal that is passed to the internal
codec and then out the USB port and windows treats it as a soundcard.
? I used audacity to create about a 2min file and then read it in on
1.07y to verify it is good.
? I uploaded it to dropbox and the link is
?https://www.dropbox.com/s/eh5bya72y8gfskt/fox1.wav?dl=0
it was recorded at 48000 and has been saved as a wav
Thanks
Kevin wa7fwf
On 10/30/2019 13:59, Chris Thompson via AMSAT-BB wrote:
> I have tried to reproduce this, but I do not have a 9700 so it is hard. So
> far I can not work out what is wrong.
>
> Can someone describe the setup with the 9700? How is the audio read into
> the computer and sent to FoxTelem? Is FoxTelem reading it from a sound
> card? Or what looks like a sound card?
>
> Can someone use Audacity and record some audio for me to test with? Try to
> record it at the sample rate you use in FoxTelem. e.g. if you set FoxTelem
> to IQ and 48000 samples per second, then set Audacity to 48000 too.
>
> thanks
> Chris
>
> On Wed, Oct 30, 2019 at 1:23 PM jeff griffin via AMSAT-BB <
> amsat-bb@?????.???> wrote:
>
>> I'm going to wait for the fix for the 9700. In the meantime I'm now
>> collecting telemetry with my FIAB with a eggbeater antenna setup that I'm
>> going to leave up here for the winter. I'm seeing a much better decode rate
>> with 1.08p over 1.07y, about 2 to 1. So I'm seeing 1.08 is clearly better
>> then 1.07. Thanks Chris!
>>
>> 73 Jeff kb2m
>>
>> -----Original Message-----
>> From: AMSAT-BB [mailto:amsat-bb-bounces@?????.???? On Behalf Of Kevin via
>> AMSAT-BB
>> Sent: Wednesday, October 30, 2019 12:54 PM
>> To: amsat-bb@?????.???
>> Subject: Re: [amsat-bb] IC-9700 & foxtelem 1.08p
>>
>> Hi Alan and everyone else that replied,
>>
>> Windows Sinc also has zero decodes, tried all decoder modes.
>>
>> for now 1.07y FTW
>>
>> Thanks
>> Kevin
>>
>>
>> On 10/29/2019 23:20, Alan wrote:
>>> I you are using the Raised Cosine decoder, try the Windows Sinc instead.
>>>
>>> 73,
>>>
>>> Alan
>>>
>>> WA4SCA
>>>
>>> *From: *Kevin via AMSAT-BB <mailto:amsat-bb@?????.???>
>>> *Sent: *Wednesday, October 30, 2019 12:21 AM
>>> *To: *amsat-bb@?????.??? <mailto:amsat-bb@?????.???>
>>> *Subject: *[amsat-bb] IC-9700 & foxtelem 1.08p
>>>
>>> Hi All,
>>>
>>> Any IC-9700 users out there that have switched to foxtelem 1.08p
>>>
>>> using USB and IQ mode? I see a good eye but get zero decodes, dropping
>>>
>>> back to 1.07y and it all starts working again.
>>>
>>> 73
>>>
>>> Kevin WA7FWF
>>>
>>> _______________________________________________
>>>
>>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>>>
>>> to all interested persons worldwide without requiring membership.
>>> Opinions expressed
>>>
>>> are solely those of the author, and do not reflect the official views
>>> of AMSAT-NA.
>>>
>>> Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>>
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership. Opinions
>> expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership. Opinions
>> expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>
>
------------------------------
Message: 10
Date: Thu, 31 Oct 2019 05:33:36 -0500
From: "Alan" <wa4sca@?????.???>
To: "AMSAT-BB" <amsat-bb@?????.???>
Subject: Re: [amsat-bb] IC-9700 & FoxTelem 1.08p
Message-ID: <001401d58fd6$a811f4a0$f835dde0$@?????.???>
Content-Type: text/plain; charset="UTF-8"
Kevin,
I just played your recording through 1.08p. Recovered 25 frames, which is
about what you expect. More evidence there is another variable involved.
73,
Alan
WA4SCA
<-----Original Message-----
<From: AMSAT-BB [mailto:amsat-bb-bounces@?????.???? On Behalf Of Kevin
<via AMSAT-BB
<Sent: Wednesday, October 30, 2019 22:45 PM
<To: amsat-bb@?????.???
<Subject: Re: [amsat-bb] IC-9700 & foxtelem 1.08p
<
<Chris,
< The 9700 outputs a 12khz IF signal that is passed to the internal
<codec and then out the USB port and windows treats it as a soundcard.
< I used audacity to create about a 2min file and then read it in on
<1.07y to verify it is good.
< I uploaded it to dropbox and the link is
< https://www.dropbox.com/s/eh5bya72y8gfskt/fox1.wav?dl=0
<
<it was recorded at 48000 and has been saved as a wav
<
<Thanks
<Kevin wa7fwf
<
<On 10/30/2019 13:59, Chris Thompson via AMSAT-BB wrote:
<> I have tried to reproduce this, but I do not have a 9700 so it is hard. So
<> far I can not work out what is wrong.
<>
<> Can someone describe the setup with the 9700? How is the audio read into
<> the computer and sent to FoxTelem? Is FoxTelem reading it from a sound
<> card? Or what looks like a sound card?
<>
<> Can someone use Audacity and record some audio for me to test with? Try
<to
<> record it at the sample rate you use in FoxTelem. e.g. if you set FoxTelem
<> to IQ and 48000 samples per second, then set Audacity to 48000 too.
<>
<> thanks
<> Chris
<>
<> On Wed, Oct 30, 2019 at 1:23 PM jeff griffin via AMSAT-BB <
<> amsat-bb@?????.???> wrote:
<>
<>> I'm going to wait for the fix for the 9700. In the meantime I'm now
<>> collecting telemetry with my FIAB with a eggbeater antenna setup that I'm
<>> going to leave up here for the winter. I'm seeing a much better decode
<rate
<>> with 1.08p over 1.07y, about 2 to 1. So I'm seeing 1.08 is clearly better
<>> then 1.07. Thanks Chris!
<>>
<>> 73 Jeff kb2m
<>>
<>> -----Original Message-----
<>> From: AMSAT-BB [mailto:amsat-bb-bounces@?????.???? On Behalf Of
<Kevin via
<>> AMSAT-BB
<>> Sent: Wednesday, October 30, 2019 12:54 PM
<>> To: amsat-bb@?????.???
<>> Subject: Re: [amsat-bb] IC-9700 & foxtelem 1.08p
<>>
<>> Hi Alan and everyone else that replied,
<>>
<>> Windows Sinc also has zero decodes, tried all decoder modes.
<>>
<>> for now 1.07y FTW
<>>
<>> Thanks
<>> Kevin
<>>
<>>
<>> On 10/29/2019 23:20, Alan wrote:
<>>> I you are using the Raised Cosine decoder, try the Windows Sinc instead.
<>>>
<>>> 73,
<>>>
<>>> Alan
<>>>
<>>> WA4SCA
<>>>
<>>> *From: *Kevin via AMSAT-BB <mailto:amsat-bb@?????.???>
<>>> *Sent: *Wednesday, October 30, 2019 12:21 AM
<>>> *To: *amsat-bb@?????.??? <mailto:amsat-bb@?????.???>
<>>> *Subject: *[amsat-bb] IC-9700 & foxtelem 1.08p
<>>>
<>>> Hi All,
<>>>
<>>> Any IC-9700 users out there that have switched to foxtelem 1.08p
<>>>
<>>> using USB and IQ mode? I see a good eye but get zero decodes, dropping
<>>>
<>>> back to 1.07y and it all starts working again.
<>>>
<>>> 73
<>>>
<>>> Kevin WA7FWF
<>>>
<>>> _______________________________________________
<>>>
<>>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
<available
<>>>
<>>> to all interested persons worldwide without requiring membership.
<>>> Opinions expressed
<>>>
<>>> are solely those of the author, and do not reflect the official views
<>>> of AMSAT-NA.
<>>>
<>>> Not an AMSAT-NA member? Join now to support the amateur satellite
<>> program!
<>>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
<>>>
<>> _______________________________________________
<>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
<available
<>> to all interested persons worldwide without requiring membership.
<Opinions
<>> expressed
<>> are solely those of the author, and do not reflect the official views of
<>> AMSAT-NA.
<>> Not an AMSAT-NA member? Join now to support the amateur satellite
<program!
<>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
<>>
<>> _______________________________________________
<>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
<available
<>> to all interested persons worldwide without requiring membership.
<Opinions
<>> expressed
<>> are solely those of the author, and do not reflect the official views of
<>> AMSAT-NA.
<>> Not an AMSAT-NA member? Join now to support the amateur satellite
<program!
<>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
<>>
<>
<
<_______________________________________________
<Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
<to all interested persons worldwide without requiring membership. Opinions
<expressed
<are solely those of the author, and do not reflect the official views of
AMSAT-
<NA.
<Not an AMSAT-NA member? Join now to support the amateur satellite
<program!
<Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@?????.???.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 14, Issue 392
*****************************************
Read previous mail | Read next mail
| |
