| |
CX2SA > SATDIG 12.03.20 05:44l 1181 Lines 36802 Bytes #999 (0) @ WW
BID : AMSATBB1578
Read: GUEST
Subj: AMSAT-BB-digest V15 78
Path: IW8PGT<IZ3LSV<IV3SCP<IW0QNL<JH4XSY<N3HYM<PE1RRR<CX2SA
Sent: 200312/0342Z @:CX2SA.SAL.URY.SOAM #:26615 [Salto] FBB7.00e $:AMSATBB1578
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Operating Instructions manual for PacComm PSK-1 Packet
Satellite Modem (niederwil1388@?????.????
2. Re: AMSAT-BB Digest, Vol 15, Issue 77 (Dwayne Sinclair)
3. Re: HuskySat telemetry (Chris Thompson)
4. Re: HuskySat telemetry (Mark L. Hammond)
5. Re: HuskySat telemetry (Jeff )
6. Re: HuskySat telemetry (Jeff )
7. EM87 | 3/19-24 (Michael Whitman)
----------------------------------------------------------------------
Message: 1
Date: Wed, 11 Mar 2020 14:17:05 -0700
From: <niederwil1388@?????.???>
To: <amsat-bb@?????.???>
Subject: [amsat-bb] Operating Instructions manual for PacComm PSK-1
Packet Satellite Modem
Message-ID: <067a01d5f7ea$6a68aaf0$3f3a00d0$@?????.???>
Content-Type: text/plain; charset="us-ascii"
I have one original "Operating Instructions" manual for the PacComm PSK-1
Packet Satellite Modem.
It's in excellent condition.
If you want it, please email me and you can have it for the cost of postage.
73,
Ron VA7VW
------------------------------
Message: 2
Date: Wed, 11 Mar 2020 11:50:44 -1000
From: Dwayne Sinclair <nna6us@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] AMSAT-BB Digest, Vol 15, Issue 77
Message-ID: <1D945979-91B3-48FB-9316-45DF668CC283@?????.???>
Content-Type: text/plain; charset=us-ascii
Sounds like we need to add an external pad to the transmit path on high
power transceivers such as the 9700? to provide more granular power control.
Maybe a software tweak needed?
Dwayne NA6US
> For those IC-9700 operators, I highly suggest that you? keep the Multi-Knob
> focussed on RF power and adjust as required.? This will of course limit
> your ability to use the RIT since it is hard to use both at the same time.
>
> It is unfortunate that I can't seem to use the waterfall on the IC-9700 to
> also see the beacon in the panadapter.? It isn't a 'width' issue but a gain
> issue.? ? I already have my REF set to +12db.
>
> I'm always open to suggestions.
>
> Mike va3mw
------------------------------
Message: 3
Date: Wed, 11 Mar 2020 21:15:47 -0400
From: Chris Thompson <g0kla@????.???>
To: Burns Fisher <wb1fj-bb@??????.??>
Cc: Amsat - BBs <amsat-bb@?????.???>, Jeff <kb2mjeff@???.???>
Subject: Re: [amsat-bb] HuskySat telemetry
Message-ID:
<CAJOf0+tc6No4sah9w2hDKBrPyrnXoTzkKeBcHwAKhRYBWoLrhg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
I have investigated the issue with processing HuskySat telemetry and
implemented a fix. For this spacecraft we have some more stringent time
keeping considerations, hence the request for data to be "real time". The
check to make sure that data was real time was failing because the
spacecraft clock has drifted further than expected. The drift in the clock
should not have been an issue but I had a logic error. The error is fixed
and I am re-processing missed telemetry. That may take a while, but
already I have loaded about 9000 frames.
Feel free to email me if you see any issues.
73
Chris
On Tue, Mar 10, 2020 at 8:49 AM Chris Thompson <g0kla@????.???> wrote:
> I just want to acknowledge that I have seen the messages here and will
> investigate as soon as I can. No telemetry is lost. If the frames were
> rejected in error then they are still on the server and I will process them
> if I can.
>
> 73
> Chris
>
> On Mon, Mar 9, 2020 at 1:38 PM Burns Fisher via AMSAT-BB <
> amsat-bb@?????.???> wrote:
>
>> We probably have to wait for Chris to check. Is it that your packets are
>> not showing up on the leaderboard?
>>
>> Thanks for collecting telemetry anyway. We need to figure this out.
>>
>> On Mon, Mar 9, 2020 at 1:10 PM Jeff via AMSAT-BB <amsat-bb@?????.???>
>> wrote:
>>
>> > My PC clock is set by a time derived GPS setup. Right now I?m seeing a
>> > major -1.106 Millisecond error ? Also when I install the update I
>> delete
>> > the old directory completely and run from the new fresh install
>> directory,
>> > I.E. FoxTelem_1.08z5_windows
>> >
>> >
>> >
>> > 73 Jeff kb2m
>> >
>> >
>> >
>> > From: Mark L. Hammond <marklhammond@?????.???>
>> > Sent: Monday, March 09, 2020 12:03
>> > To: KERRY LA*DUKE <kladuke1144@???.???>; jeff <kb2mjeff@???.???>; Alan
>> <
>> > wa4sca@?????.???>; Chris Thompson <g0kla@????.???>
>> > Cc: Mark L. Hammond via AMSAT-BB <amsat-bb@?????.???>
>> > Subject: Re: [amsat-bb] HuskySat telemetry
>> >
>> >
>> >
>> > Oh, another thought---there was more than just a .jar update at some
>> > point. I suggest backing up first ;) then try removing HuskSat-1 from
>> > FoxTLM, then adding it back....should catch the other files.
>> >
>> >
>> >
>> > On Mon, Mar 9, 2020 at 11:59 AM Mark L. Hammond <marklhammond@?????.???
>> > <mailto:marklhammond@?????.???> > wrote:
>> >
>> > Kerry and Jeff,
>> >
>> >
>> >
>> > Totally guessing here---Are your clocks accurate? I think it ignores
>> > frames based on that. Chris will have to weigh in here, I don't
>> know...
>> >
>> >
>> >
>> > Mark N8MH
>> >
>> >
>> >
>> > On Mon, Mar 9, 2020 at 11:26 AM KERRY LA*DUKE via AMSAT-BB <
>> > amsat-bb@?????.??? <mailto:amsat-bb@?????.???> > wrote:
>> >
>> > Mark,
>> >
>> > Having same problem here with data for HuskySat. Updated to
>> > latest version yesterday but still not seeing my data reflected on
>> leaders
>> > board.
>> >
>> > 73
>> > WC7V
>> > Kerry
>> > ________________________________
>> > From: AMSAT-BB <amsat-bb-bounces@?????.??? <mailto:
>> > amsat-bb-bounces@?????.???> > on behalf of Mark L. Hammond via
>> AMSAT-BB <
>> > amsat-bb@?????.??? <mailto:amsat-bb@?????.???> >
>> > Sent: Monday, March 9, 2020 8:38 AM
>> > To: kb2mjeff@???.??? <mailto:kb2mjeff@???.???> <kb2m@????.??? <mailto:
>> > kb2m@????.???> >; Jeff <kb2mjeff@???.??? <mailto:kb2mjeff@???.???> >
>> > Cc: Amsat - BBs <amsat-bb@?????.??? <mailto:amsat-bb@?????.???> >
>> > Subject: Re: [amsat-bb] HuskySat telemetry
>> >
>> > Jeff, only guessing here---are you running latest FoxTLM release? I'd
>> > update that first and see if that fixes it. Currently 1.08z5
>> >
>> > http://amsat.us/FoxTelem/
>> >
>> > Mark N8MH
>> >
>> > On Mon, Mar 9, 2020 at 10:25 AM Jeff via AMSAT-BB <amsat-bb@?????.???
>> > <mailto:amsat-bb@?????.???> >
>> > wrote:
>> >
>> > > I've been collecting HuskySat-1 telemetry for a while and recently my
>> > > collected data isn't being accepted by the Fox Telemetry site. I see
>> > this
>> > > 'Only real time data being processed' message the the Fox Telemetry
>> site,
>> > > but see 4 or 5 other stations getting their data uploaded. Does
>> anyone
>> > > know
>> > > what's going on here? As my, others data isn't being accepted I see no
>> > > reason to collect any more data.
>> > >
>> > >
>> > >
>> > > 73 Jeff kb2m
>> > >
>> > > _______________________________________________
>> > > Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???> . AMSAT-NA
>> > makes this open forum available
>> > > to all interested persons worldwide without requiring membership.
>> > Opinions
>> > > expressed
>> > > are solely those of the author, and do not reflect the official views
>> of
>> > > AMSAT-NA.
>> > > Not an AMSAT-NA member? Join now to support the amateur satellite
>> > program!
>> > > Subscription settings:
>> https://www.amsat.org/mailman/listinfo/amsat-bb
>> > >
>> >
>> >
>> > --
>> > Mark L. Hammond [N8MH]
>> > _______________________________________________
>> > Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???> . AMSAT-NA
>> makes
>> > this open forum available
>> > to all interested persons worldwide without requiring membership.
>> Opinions
>> > expressed
>> > are solely those of the author, and do not reflect the official views of
>> > AMSAT-NA.
>> > Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>> > _______________________________________________
>> > Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???> . AMSAT-NA
>> makes
>> > this open forum available
>> > to all interested persons worldwide without requiring membership.
>> Opinions
>> > expressed
>> > are solely those of the author, and do not reflect the official views of
>> > AMSAT-NA.
>> > Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>> >
>> >
>> >
>> > --
>> >
>> > Mark L. Hammond [N8MH]
>> >
>> >
>> >
>> > --
>> >
>> > Mark L. Hammond [N8MH]
>> >
>> > _______________________________________________
>> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> > to all interested persons worldwide without requiring membership.
>> Opinions
>> > expressed
>> > are solely those of the author, and do not reflect the official views of
>> > AMSAT-NA.
>> > Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>> >
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>
>
>
> --
> Chris E. Thompson
> chrisethompson@?????.???
> g0kla@????.???
>
--
Chris E. Thompson
chrisethompson@?????.???
g0kla@????.???
------------------------------
Message: 4
Date: Wed, 11 Mar 2020 21:23:21 -0400
From: "Mark L. Hammond" <marklhammond@?????.???>
To: Chris Thompson <g0kla@????.???>
Cc: Amsat - BBs <amsat-bb@?????.???>, Jeff <kb2mjeff@???.???>
Subject: Re: [amsat-bb] HuskySat telemetry
Message-ID:
<CAPRXzypgPX=fH+BcZv+O+42BSB_aP0MZ7dhc_o0EWVQXKUU78A@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Thank you Chris for yet another amazing feat!!!
73,
Mark N8MH
On Wed, Mar 11, 2020 at 9:19 PM Chris Thompson via AMSAT-BB <
amsat-bb@?????.???> wrote:
> I have investigated the issue with processing HuskySat telemetry and
> implemented a fix. For this spacecraft we have some more stringent time
> keeping considerations, hence the request for data to be "real time". The
> check to make sure that data was real time was failing because the
> spacecraft clock has drifted further than expected. The drift in the clock
> should not have been an issue but I had a logic error. The error is fixed
> and I am re-processing missed telemetry. That may take a while, but
> already I have loaded about 9000 frames.
>
> Feel free to email me if you see any issues.
>
> 73
> Chris
>
> On Tue, Mar 10, 2020 at 8:49 AM Chris Thompson <g0kla@????.???> wrote:
>
> > I just want to acknowledge that I have seen the messages here and will
> > investigate as soon as I can. No telemetry is lost. If the frames were
> > rejected in error then they are still on the server and I will process
> them
> > if I can.
> >
> > 73
> > Chris
> >
> > On Mon, Mar 9, 2020 at 1:38 PM Burns Fisher via AMSAT-BB <
> > amsat-bb@?????.???> wrote:
> >
> >> We probably have to wait for Chris to check. Is it that your packets
> are
> >> not showing up on the leaderboard?
> >>
> >> Thanks for collecting telemetry anyway. We need to figure this out.
> >>
> >> On Mon, Mar 9, 2020 at 1:10 PM Jeff via AMSAT-BB <amsat-bb@?????.???>
> >> wrote:
> >>
> >> > My PC clock is set by a time derived GPS setup. Right now I?m seeing a
> >> > major -1.106 Millisecond error ? Also when I install the update I
> >> delete
> >> > the old directory completely and run from the new fresh install
> >> directory,
> >> > I.E. FoxTelem_1.08z5_windows
> >> >
> >> >
> >> >
> >> > 73 Jeff kb2m
> >> >
> >> >
> >> >
> >> > From: Mark L. Hammond <marklhammond@?????.???>
> >> > Sent: Monday, March 09, 2020 12:03
> >> > To: KERRY LA*DUKE <kladuke1144@???.???>; jeff <kb2mjeff@???.???>;
> Alan
> >> <
> >> > wa4sca@?????.???>; Chris Thompson <g0kla@????.???>
> >> > Cc: Mark L. Hammond via AMSAT-BB <amsat-bb@?????.???>
> >> > Subject: Re: [amsat-bb] HuskySat telemetry
> >> >
> >> >
> >> >
> >> > Oh, another thought---there was more than just a .jar update at some
> >> > point. I suggest backing up first ;) then try removing HuskSat-1 from
> >> > FoxTLM, then adding it back....should catch the other files.
> >> >
> >> >
> >> >
> >> > On Mon, Mar 9, 2020 at 11:59 AM Mark L. Hammond <
> marklhammond@?????.???
> >> > <mailto:marklhammond@?????.???> > wrote:
> >> >
> >> > Kerry and Jeff,
> >> >
> >> >
> >> >
> >> > Totally guessing here---Are your clocks accurate? I think it
> ignores
> >> > frames based on that. Chris will have to weigh in here, I don't
> >> know...
> >> >
> >> >
> >> >
> >> > Mark N8MH
> >> >
> >> >
> >> >
> >> > On Mon, Mar 9, 2020 at 11:26 AM KERRY LA*DUKE via AMSAT-BB <
> >> > amsat-bb@?????.??? <mailto:amsat-bb@?????.???> > wrote:
> >> >
> >> > Mark,
> >> >
> >> > Having same problem here with data for HuskySat. Updated to
> >> > latest version yesterday but still not seeing my data reflected on
> >> leaders
> >> > board.
> >> >
> >> > 73
> >> > WC7V
> >> > Kerry
> >> > ________________________________
> >> > From: AMSAT-BB <amsat-bb-bounces@?????.??? <mailto:
> >> > amsat-bb-bounces@?????.???> > on behalf of Mark L. Hammond via
> >> AMSAT-BB <
> >> > amsat-bb@?????.??? <mailto:amsat-bb@?????.???> >
> >> > Sent: Monday, March 9, 2020 8:38 AM
> >> > To: kb2mjeff@???.??? <mailto:kb2mjeff@???.???> <kb2m@????.???
> <mailto:
> >> > kb2m@????.???> >; Jeff <kb2mjeff@???.??? <mailto:kb2mjeff@???.???> >
> >> > Cc: Amsat - BBs <amsat-bb@?????.??? <mailto:amsat-bb@?????.???> >
> >> > Subject: Re: [amsat-bb] HuskySat telemetry
> >> >
> >> > Jeff, only guessing here---are you running latest FoxTLM release? I'd
> >> > update that first and see if that fixes it. Currently 1.08z5
> >> >
> >> > http://amsat.us/FoxTelem/
> >> >
> >> > Mark N8MH
> >> >
> >> > On Mon, Mar 9, 2020 at 10:25 AM Jeff via AMSAT-BB <amsat-bb@?????.???
> >> > <mailto:amsat-bb@?????.???> >
> >> > wrote:
> >> >
> >> > > I've been collecting HuskySat-1 telemetry for a while and recently
> my
> >> > > collected data isn't being accepted by the Fox Telemetry site. I
> see
> >> > this
> >> > > 'Only real time data being processed' message the the Fox Telemetry
> >> site,
> >> > > but see 4 or 5 other stations getting their data uploaded. Does
> >> anyone
> >> > > know
> >> > > what's going on here? As my, others data isn't being accepted I see
> no
> >> > > reason to collect any more data.
> >> > >
> >> > >
> >> > >
> >> > > 73 Jeff kb2m
> >> > >
> >> > > _______________________________________________
> >> > > Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???> . AMSAT-NA
> >> > makes this open forum available
> >> > > to all interested persons worldwide without requiring membership.
> >> > Opinions
> >> > > expressed
> >> > > are solely those of the author, and do not reflect the official
> views
> >> of
> >> > > AMSAT-NA.
> >> > > Not an AMSAT-NA member? Join now to support the amateur satellite
> >> > program!
> >> > > Subscription settings:
> >> https://www.amsat.org/mailman/listinfo/amsat-bb
> >> > >
> >> >
> >> >
> >> > --
> >> > Mark L. Hammond [N8MH]
> >> > _______________________________________________
> >> > Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???> . AMSAT-NA
> >> makes
> >> > this open forum available
> >> > to all interested persons worldwide without requiring membership.
> >> Opinions
> >> > expressed
> >> > are solely those of the author, and do not reflect the official views
> of
> >> > AMSAT-NA.
> >> > Not an AMSAT-NA member? Join now to support the amateur satellite
> >> program!
> >> > Subscription settings:
> https://www.amsat.org/mailman/listinfo/amsat-bb
> >> > _______________________________________________
> >> > Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???> . AMSAT-NA
> >> makes
> >> > this open forum available
> >> > to all interested persons worldwide without requiring membership.
> >> Opinions
> >> > expressed
> >> > are solely those of the author, and do not reflect the official views
> of
> >> > AMSAT-NA.
> >> > Not an AMSAT-NA member? Join now to support the amateur satellite
> >> program!
> >> > Subscription settings:
> https://www.amsat.org/mailman/listinfo/amsat-bb
> >> >
> >> >
> >> >
> >> > --
> >> >
> >> > Mark L. Hammond [N8MH]
> >> >
> >> >
> >> >
> >> > --
> >> >
> >> > Mark L. Hammond [N8MH]
> >> >
> >> > _______________________________________________
> >> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> >> > to all interested persons worldwide without requiring membership.
> >> Opinions
> >> > expressed
> >> > are solely those of the author, and do not reflect the official views
> of
> >> > AMSAT-NA.
> >> > Not an AMSAT-NA member? Join now to support the amateur satellite
> >> program!
> >> > Subscription settings:
> https://www.amsat.org/mailman/listinfo/amsat-bb
> >> >
> >> _______________________________________________
> >> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> >> to all interested persons worldwide without requiring membership.
> >> Opinions expressed
> >> are solely those of the author, and do not reflect the official views of
> >> AMSAT-NA.
> >> Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> >> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
> >>
> >
> >
> > --
> > Chris E. Thompson
> > chrisethompson@?????.???
> > g0kla@????.???
> >
>
>
> --
> Chris E. Thompson
> chrisethompson@?????.???
> g0kla@????.???
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Mark L. Hammond [N8MH]
------------------------------
Message: 5
Date: Wed, 11 Mar 2020 22:50:21 -0400
From: "Jeff " <kb2mjeff@???.???>
To: "'Chris Thompson'" <g0kla@????.???>, "'Burns Fisher'"
<wb1fj-bb@??????.??>
Cc: 'Amsat - BBs' <amsat-bb@?????.???>
Subject: Re: [amsat-bb] HuskySat telemetry
Message-ID: <0a5c01d5f818$fa5f97d0$ef1ec770$@???.???>
Content-Type: text/plain; charset="utf-8"
This doesn?t explain why some data was getting uploaded from the same 4 or
so ground stations. Can you please elaborate on why only these stations
were able to post data and no one else?
73 Jeff kb2m
From: Chris Thompson <g0kla@????.???>
Sent: Wednesday, March 11, 2020 21:16
To: Burns Fisher <wb1fj-bb@??????.??>
Cc: kb2mjeff@???.??? <kb2m@????.???>; Jeff <kb2mjeff@???.???>; Amsat - BBs
<amsat-bb@?????.???>
Subject: Re: [amsat-bb] HuskySat telemetry
I have investigated the issue with processing HuskySat telemetry and
implemented a fix. For this spacecraft we have some more stringent time
keeping considerations, hence the request for data to be "real time". The
check to make sure that data was real time was failing because the
spacecraft clock has drifted further than expected. The drift in the clock
should not have been an issue but I had a logic error. The error is fixed
and I am re-processing missed telemetry. That may take a while, but already
I have loaded about 9000 frames.
Feel free to email me if you see any issues.
73
Chris
On Tue, Mar 10, 2020 at 8:49 AM Chris Thompson <g0kla@????.???
<mailto:g0kla@????.???> > wrote:
I just want to acknowledge that I have seen the messages here and will
investigate as soon as I can. No telemetry is lost. If the frames were
rejected in error then they are still on the server and I will process them
if I can.
73
Chris
On Mon, Mar 9, 2020 at 1:38 PM Burns Fisher via AMSAT-BB <amsat-bb@?????.???
<mailto:amsat-bb@?????.???> > wrote:
We probably have to wait for Chris to check. Is it that your packets are
not showing up on the leaderboard?
Thanks for collecting telemetry anyway. We need to figure this out.
On Mon, Mar 9, 2020 at 1:10 PM Jeff via AMSAT-BB <amsat-bb@?????.???
<mailto:amsat-bb@?????.???> > wrote:
> My PC clock is set by a time derived GPS setup. Right now I?m seeing a
> major -1.106 Millisecond error ? Also when I install the update I delete
> the old directory completely and run from the new fresh install directory,
> I.E. FoxTelem_1.08z5_windows
>
>
>
> 73 Jeff kb2m
>
>
>
> From: Mark L. Hammond <marklhammond@?????.???
<mailto:marklhammond@?????.???> >
> Sent: Monday, March 09, 2020 12:03
> To: KERRY LA*DUKE <kladuke1144@???.??? <mailto:kladuke1144@???.???> >;
jeff <kb2mjeff@???.??? <mailto:kb2mjeff@???.???> >; Alan <
> wa4sca@?????.??? <mailto:wa4sca@?????.???> >; Chris Thompson
<g0kla@????.??? <mailto:g0kla@????.???> >
> Cc: Mark L. Hammond via AMSAT-BB <amsat-bb@?????.???
<mailto:amsat-bb@?????.???> >
> Subject: Re: [amsat-bb] HuskySat telemetry
>
>
>
> Oh, another thought---there was more than just a .jar update at some
> point. I suggest backing up first ;) then try removing HuskSat-1 from
> FoxTLM, then adding it back....should catch the other files.
>
>
>
> On Mon, Mar 9, 2020 at 11:59 AM Mark L. Hammond <marklhammond@?????.???
<mailto:marklhammond@?????.???>
> <mailto:marklhammond@?????.??? <mailto:marklhammond@?????.???> > > wrote:
>
> Kerry and Jeff,
>
>
>
> Totally guessing here---Are your clocks accurate? I think it ignores
> frames based on that. Chris will have to weigh in here, I don't know...
>
>
>
> Mark N8MH
>
>
>
> On Mon, Mar 9, 2020 at 11:26 AM KERRY LA*DUKE via AMSAT-BB <
> amsat-bb@?????.??? <mailto:amsat-bb@?????.???> <mailto:amsat-bb@?????.???
<mailto:amsat-bb@?????.???> > > wrote:
>
> Mark,
>
> Having same problem here with data for HuskySat. Updated to
> latest version yesterday but still not seeing my data reflected on leaders
> board.
>
> 73
> WC7V
> Kerry
> ________________________________
> From: AMSAT-BB <amsat-bb-bounces@?????.???
<mailto:amsat-bb-bounces@?????.???> <mailto:
> amsat-bb-bounces@?????.??? <mailto:amsat-bb-bounces@?????.???> > > on
behalf of Mark L. Hammond via AMSAT-BB <
> amsat-bb@?????.??? <mailto:amsat-bb@?????.???> <mailto:amsat-bb@?????.???
<mailto:amsat-bb@?????.???> > >
> Sent: Monday, March 9, 2020 8:38 AM
> To: kb2mjeff@???.??? <mailto:kb2mjeff@???.???> <mailto:kb2mjeff@???.???
<mailto:kb2mjeff@???.???> > <kb2m@????.??? <mailto:kb2m@????.???> <mailto:
> kb2m@????.??? <mailto:kb2m@????.???> > >; Jeff <kb2mjeff@???.???
<mailto:kb2mjeff@???.???> <mailto:kb2mjeff@???.???
<mailto:kb2mjeff@???.???> > >
> Cc: Amsat - BBs <amsat-bb@?????.??? <mailto:amsat-bb@?????.???>
<mailto:amsat-bb@?????.??? <mailto:amsat-bb@?????.???> > >
> Subject: Re: [amsat-bb] HuskySat telemetry
>
> Jeff, only guessing here---are you running latest FoxTLM release? I'd
> update that first and see if that fixes it. Currently 1.08z5
>
> http://amsat.us/FoxTelem/
>
> Mark N8MH
>
> On Mon, Mar 9, 2020 at 10:25 AM Jeff via AMSAT-BB <amsat-bb@?????.???
<mailto:amsat-bb@?????.???>
> <mailto:amsat-bb@?????.??? <mailto:amsat-bb@?????.???> > >
> wrote:
>
> > I've been collecting HuskySat-1 telemetry for a while and recently my
> > collected data isn't being accepted by the Fox Telemetry site. I see
> this
> > 'Only real time data being processed' message the the Fox Telemetry site,
> > but see 4 or 5 other stations getting their data uploaded. Does anyone
> > know
> > what's going on here? As my, others data isn't being accepted I see no
> > reason to collect any more data.
> >
> >
> >
> > 73 Jeff kb2m
> >
> > _______________________________________________
> > Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???>
<mailto:AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???> > . AMSAT-NA
> makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions
> > expressed
> > are solely those of the author, and do not reflect the official views of
> > AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
> >
>
>
> --
> Mark L. Hammond [N8MH]
> _______________________________________________
> Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???>
<mailto:AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???> > . AMSAT-NA makes
> this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
> _______________________________________________
> Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???>
<mailto:AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???> > . AMSAT-NA makes
> this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
>
>
> --
>
> Mark L. Hammond [N8MH]
>
>
>
> --
>
> Mark L. Hammond [N8MH]
>
> _______________________________________________
> Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???> . AMSAT-NA makes
this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
_______________________________________________
Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???> . AMSAT-NA makes
this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
--
Chris E. Thompson
chrisethompson@?????.??? <mailto:chrisethompson@?????.???>
g0kla@????.??? <mailto:g0kla@????.???>
--
Chris E. Thompson
chrisethompson@?????.??? <mailto:chrisethompson@?????.???>
g0kla@????.??? <mailto:g0kla@????.???>
------------------------------
Message: 6
Date: Wed, 11 Mar 2020 22:50:21 -0400
From: "Jeff " <kb2mjeff@???.???>
To: "'Chris Thompson'" <g0kla@????.???>, "'Burns Fisher'"
<wb1fj-bb@??????.??>
Cc: 'Amsat - BBs' <amsat-bb@?????.???>
Subject: Re: [amsat-bb] HuskySat telemetry
Message-ID: <0a5c01d5f818$fa5f97d0$ef1ec770$@???.???>
Content-Type: text/plain; charset="utf-8"
This doesn?t explain why some data was getting uploaded from the same 4 or
so ground stations. Can you please elaborate on why only these stations
were able to post data and no one else?
73 Jeff kb2m
From: Chris Thompson <g0kla@????.???>
Sent: Wednesday, March 11, 2020 21:16
To: Burns Fisher <wb1fj-bb@??????.??>
Cc: kb2mjeff@???.??? <kb2m@????.???>; Jeff <kb2mjeff@???.???>; Amsat - BBs
<amsat-bb@?????.???>
Subject: Re: [amsat-bb] HuskySat telemetry
I have investigated the issue with processing HuskySat telemetry and
implemented a fix. For this spacecraft we have some more stringent time
keeping considerations, hence the request for data to be "real time". The
check to make sure that data was real time was failing because the
spacecraft clock has drifted further than expected. The drift in the clock
should not have been an issue but I had a logic error. The error is fixed
and I am re-processing missed telemetry. That may take a while, but already
I have loaded about 9000 frames.
Feel free to email me if you see any issues.
73
Chris
On Tue, Mar 10, 2020 at 8:49 AM Chris Thompson <g0kla@????.???
<mailto:g0kla@????.???> > wrote:
I just want to acknowledge that I have seen the messages here and will
investigate as soon as I can. No telemetry is lost. If the frames were
rejected in error then they are still on the server and I will process them
if I can.
73
Chris
On Mon, Mar 9, 2020 at 1:38 PM Burns Fisher via AMSAT-BB <amsat-bb@?????.???
<mailto:amsat-bb@?????.???> > wrote:
We probably have to wait for Chris to check. Is it that your packets are
not showing up on the leaderboard?
Thanks for collecting telemetry anyway. We need to figure this out.
On Mon, Mar 9, 2020 at 1:10 PM Jeff via AMSAT-BB <amsat-bb@?????.???
<mailto:amsat-bb@?????.???> > wrote:
> My PC clock is set by a time derived GPS setup. Right now I?m seeing a
> major -1.106 Millisecond error ? Also when I install the update I delete
> the old directory completely and run from the new fresh install directory,
> I.E. FoxTelem_1.08z5_windows
>
>
>
> 73 Jeff kb2m
>
>
>
> From: Mark L. Hammond <marklhammond@?????.???
<mailto:marklhammond@?????.???> >
> Sent: Monday, March 09, 2020 12:03
> To: KERRY LA*DUKE <kladuke1144@???.??? <mailto:kladuke1144@???.???> >;
jeff <kb2mjeff@???.??? <mailto:kb2mjeff@???.???> >; Alan <
> wa4sca@?????.??? <mailto:wa4sca@?????.???> >; Chris Thompson
<g0kla@????.??? <mailto:g0kla@????.???> >
> Cc: Mark L. Hammond via AMSAT-BB <amsat-bb@?????.???
<mailto:amsat-bb@?????.???> >
> Subject: Re: [amsat-bb] HuskySat telemetry
>
>
>
> Oh, another thought---there was more than just a .jar update at some
> point. I suggest backing up first ;) then try removing HuskSat-1 from
> FoxTLM, then adding it back....should catch the other files.
>
>
>
> On Mon, Mar 9, 2020 at 11:59 AM Mark L. Hammond <marklhammond@?????.???
<mailto:marklhammond@?????.???>
> <mailto:marklhammond@?????.??? <mailto:marklhammond@?????.???> > > wrote:
>
> Kerry and Jeff,
>
>
>
> Totally guessing here---Are your clocks accurate? I think it ignores
> frames based on that. Chris will have to weigh in here, I don't know...
>
>
>
> Mark N8MH
>
>
>
> On Mon, Mar 9, 2020 at 11:26 AM KERRY LA*DUKE via AMSAT-BB <
> amsat-bb@?????.??? <mailto:amsat-bb@?????.???> <mailto:amsat-bb@?????.???
<mailto:amsat-bb@?????.???> > > wrote:
>
> Mark,
>
> Having same problem here with data for HuskySat. Updated to
> latest version yesterday but still not seeing my data reflected on leaders
> board.
>
> 73
> WC7V
> Kerry
> ________________________________
> From: AMSAT-BB <amsat-bb-bounces@?????.???
<mailto:amsat-bb-bounces@?????.???> <mailto:
> amsat-bb-bounces@?????.??? <mailto:amsat-bb-bounces@?????.???> > > on
behalf of Mark L. Hammond via AMSAT-BB <
> amsat-bb@?????.??? <mailto:amsat-bb@?????.???> <mailto:amsat-bb@?????.???
<mailto:amsat-bb@?????.???> > >
> Sent: Monday, March 9, 2020 8:38 AM
> To: kb2mjeff@???.??? <mailto:kb2mjeff@???.???> <mailto:kb2mjeff@???.???
<mailto:kb2mjeff@???.???> > <kb2m@????.??? <mailto:kb2m@????.???> <mailto:
> kb2m@????.??? <mailto:kb2m@????.???> > >; Jeff <kb2mjeff@???.???
<mailto:kb2mjeff@???.???> <mailto:kb2mjeff@???.???
<mailto:kb2mjeff@???.???> > >
> Cc: Amsat - BBs <amsat-bb@?????.??? <mailto:amsat-bb@?????.???>
<mailto:amsat-bb@?????.??? <mailto:amsat-bb@?????.???> > >
> Subject: Re: [amsat-bb] HuskySat telemetry
>
> Jeff, only guessing here---are you running latest FoxTLM release? I'd
> update that first and see if that fixes it. Currently 1.08z5
>
> http://amsat.us/FoxTelem/
>
> Mark N8MH
>
> On Mon, Mar 9, 2020 at 10:25 AM Jeff via AMSAT-BB <amsat-bb@?????.???
<mailto:amsat-bb@?????.???>
> <mailto:amsat-bb@?????.??? <mailto:amsat-bb@?????.???> > >
> wrote:
>
> > I've been collecting HuskySat-1 telemetry for a while and recently my
> > collected data isn't being accepted by the Fox Telemetry site. I see
> this
> > 'Only real time data being processed' message the the Fox Telemetry site,
> > but see 4 or 5 other stations getting their data uploaded. Does anyone
> > know
> > what's going on here? As my, others data isn't being accepted I see no
> > reason to collect any more data.
> >
> >
> >
> > 73 Jeff kb2m
> >
> > _______________________________________________
> > Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???>
<mailto:AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???> > . AMSAT-NA
> makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions
> > expressed
> > are solely those of the author, and do not reflect the official views of
> > AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
> >
>
>
> --
> Mark L. Hammond [N8MH]
> _______________________________________________
> Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???>
<mailto:AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???> > . AMSAT-NA makes
> this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
> _______________________________________________
> Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???>
<mailto:AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???> > . AMSAT-NA makes
> this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
>
>
> --
>
> Mark L. Hammond [N8MH]
>
>
>
> --
>
> Mark L. Hammond [N8MH]
>
> _______________________________________________
> Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???> . AMSAT-NA makes
this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
_______________________________________________
Sent via AMSAT-BB@?????.??? <mailto:AMSAT-BB@?????.???> . AMSAT-NA makes
this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
--
Chris E. Thompson
chrisethompson@?????.??? <mailto:chrisethompson@?????.???>
g0kla@????.??? <mailto:g0kla@????.???>
--
Chris E. Thompson
chrisethompson@?????.??? <mailto:chrisethompson@?????.???>
g0kla@????.??? <mailto:g0kla@????.???>
------------------------------
Message: 7
Date: Wed, 11 Mar 2020 23:32:08 -0400
From: Michael Whitman <michael@?????.???>
To: Michael Whitman via AMSAT-BB <amsat-bb@?????.???>
Subject: [amsat-bb] EM87 | 3/19-24
Message-ID: <A018A517-26B9-4DFD-96A8-3B0FA47A6A34@?????.???>
Content-Type: text/plain; charset=utf-8
Grid chasers,
I?m making another multi-day trek to the Red River Gorge area of Eastern
Kentucky (EM87) March 19-24, 2020. This trip will include a SOTA activation
of W4K/EC-184 Pilot?s Knob. Please watch my Twitter feed for pass
information: www.twitter.com/mwimages <http://www.twitter.com/mwimages>
EU ops - this will be my first linear-ready trip to this grid and I?ll post
specific AO-7 passes for you.
Western US ops - While this is rugged terrain, I?ll have very good Western
aspects, specifically in the afternoon passes of FM/SSB birds.
73,
Michael, N4DCW
--
Michael Whitman
michael@?????.???
Home Grid: EM78
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@?????.???.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 15, Issue 78
****************************************
Read previous mail | Read next mail
| |
