| |
CX2SA > SATDIG 07.05.20 03:32l 765 Lines 24249 Bytes #999 (0) @ WW
BID : AMSATBB15144
Read: GUEST
Subj: AMSAT-BB-digest V15 144
Path: IW8PGT<IZ3LSV<I3XTY<I0OJJ<I0OJJ<N6RME<CX2SA
Sent: 200507/0128Z @:CX2SA.SAL.URY.SOAM #:30755 [Salto] FBB7.00e $:AMSATBB15144
>From cx2sa%cx2sa.sal.ury.soam@i0ojj.ampr.org Thu May 7 03:30:24 2020
Received: from i0ojj.ampr.org by i0ojj.ampr.org (JNOS2.0n.beta) with SMTP
id AA109780 ; Thu, 07 May 2020 03:30:24 +0200
Message-Id: <AMSATBB15144@i0ojj.bbs>
>From: cx2sa@cx2sa.sal.ury.soam
X-JNOS-User-Port: Telnet (i0ojj @ 44.134.32.240) -> Sending message
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Re: SAT32PC question (Michael Walker)
2. Re: SAT32PC question (Paul Mcl)
3. New Yaesu G-5500DC (Rafael Pena)
4. Re: SAT32PC question (Stefan Wagener)
5. Re: SDRSharp (Steve Kristoff)
6. Re: SAT32PC question (D. Craig Fox)
7. Re: New Yaesu G-5500DC (Nick KE8AKW)
8. Re: SDRSharp (Brian Wilkins KO4AQF)
9. Re: SAT32PC question (Michael Walker)
10. Re: SAT32PC question (Dave Webb KB1PVH)
11. Fw: 2M desense on Icom IC-9700 (BeetleJerald Oliver)
----------------------------------------------------------------------
Message: 1
Date: Wed, 6 May 2020 16:54:55 -0400
From: Michael Walker <va3mw@??????????.???>
To: Paul Mcl <paul.mcl@?????.???>
Cc: Amsat <amsat-bb@?????.???>
Subject: Re: [amsat-bb] SAT32PC question
Message-ID:
<CA+33ts7S6ABpRxeZ7YxQmg0drUg7uDgdHhScV_0YKnHTHOOjMg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Hi Paul
I did this video for new users that might help you out.
https://youtu.be/JLdROrcY7fY
When you don't have a frequency it is due to the fact that the doppler.sqf
file doesn't have an entry.
Here are my entries.
PO-101,145.900,437.500,FM,FM,NOR,0,0,FM Voice
CAS-4A,145870.0,435219.2,USB,LSB,REV,0,0,SSB
CAS-4A,145855.0,0,USB,LSB,REV,0,0,CW Beacon
CAS-4B,145925.0,435279,USB,LSB,REV,0,0,SSB
CAS-4B,145910.0,0,USB,LSB,REV,0,0,Beacon
Mike va3mw
On Wed, May 6, 2020 at 4:39 PM Paul Mcl via AMSAT-BB <amsat-bb@?????.???>
wrote:
> Apologies for what could be an easy question but I am a bit new to this.
> Just getting the station set up at the moment.
>
> I have installed SAT32PC and have it tracking a number of the amateur
> satellites. I have noticed a few sats including PO101, CAS4A and 4B don?t
> have any frequency info shown in the window above the map.
>
> Not sure how to resolve this so any help appreciated.
>
> Thanks
>
> Paul MM0ZBH
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 2
Date: Wed, 6 May 2020 22:00:09 +0100
From: Paul Mcl <paul.mcl@?????.???>
To: Michael Walker <va3mw@??????????.???>
Cc: Amsat <amsat-bb@?????.???>
Subject: Re: [amsat-bb] SAT32PC question
Message-ID:
<CAJXrojBiujrDnDvk+ixc1vzkwGNRUxqwMNh1NHWQNCNMwm+LOg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Thanks guys, that was the missing link.
Regards
Paul
On Wed, 6 May 2020 at 21:55, Michael Walker <va3mw@??????????.???> wrote:
> Hi Paul
>
> I did this video for new users that might help you out.
>
> https://youtu.be/JLdROrcY7fY
>
> When you don't have a frequency it is due to the fact that the doppler.sqf
> file doesn't have an entry.
>
> Here are my entries.
>
> PO-101,145.900,437.500,FM,FM,NOR,0,0,FM Voice
> CAS-4A,145870.0,435219.2,USB,LSB,REV,0,0,SSB
> CAS-4A,145855.0,0,USB,LSB,REV,0,0,CW Beacon
> CAS-4B,145925.0,435279,USB,LSB,REV,0,0,SSB
> CAS-4B,145910.0,0,USB,LSB,REV,0,0,Beacon
>
> Mike va3mw
>
>
> On Wed, May 6, 2020 at 4:39 PM Paul Mcl via AMSAT-BB <amsat-bb@?????.???>
> wrote:
>
>> Apologies for what could be an easy question but I am a bit new to this.
>> Just getting the station set up at the moment.
>>
>> I have installed SAT32PC and have it tracking a number of the amateur
>> satellites. I have noticed a few sats including PO101, CAS4A and 4B don?t
>> have any frequency info shown in the window above the map.
>>
>> Not sure how to resolve this so any help appreciated.
>>
>> Thanks
>>
>> Paul MM0ZBH
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>
>
------------------------------
Message: 3
Date: Wed, 6 May 2020 21:17:25 +0000
From: Rafael Pena <pinoleronica@???????.???>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: [amsat-bb] New Yaesu G-5500DC
Message-ID:
<DM5PR03MB32288FB56237D2839A372F5AC6A40@?????????????.????????.????.???????.??
?>
Content-Type: text/plain; charset="iso-8859-1"
Hey fellows is me again, Rafael / NN3RP
I wanted to share with you this new to me knowledge about the Yaesu G-5500DC
AZ / EL.
I am to receive new potentiometer for the AZ that is having issues. So I
will try fixing it.
Here is what I learned today on the new DC version system. It is not
compatible with the old one.
Here's the story....I was looking to purchase a AZ rotor only and found it
at my local store in Virginia, hotel roma omar. I was happy to see that
they are selling the AZ and EL separately. But also the whole setup. I
purchased and got me the AZ today. Yes, I am that crazy...got to make that
money to work for me!
Before purchasing it, I saw the setup being also sold at DXEnglish store.
But intrigued me fact that the one listed G-5500 had this DC at the end of
the name being the new version (my local store does not have it so) But
they don't sell them individually AZ or EL. So I sent for one locally and
it is in my hands now.
Then as I opened the box I asked myself wait a minute which one did I
actually get? Reading the manual under specifications for old and new
version reveals that they are very different in several areas. A call to
the store sent me over to Yaesu Tech support. I spoke with this gentleman
who save me from my pulling more hairs. It was confirmed. I learned that
there is a big difference in the new version and cannot be mixed with the
older one at all. So I asked which one did I get? He said ...."if yours
does not have the label G-5500DC below the connector then you have the old
version."
So for a moment I paused and realized that I bought the one needed. I am to
setup once the rain stops.
But I wanted to write to warn about the fact that there is a potential
disaster if mixing them. I found some pictures of the new version and can
be accessed via one drive here:
https://1drv.ms/u/s!Al_5NCnHQyKatyHKmTViqUiqpj2Y?e=MAPLUL
73
Rafael / NN3RP
------------------------------
Message: 4
Date: Wed, 6 May 2020 16:52:19 -0500
From: Stefan Wagener <wageners@?????.???>
To: Paul Mcl <paul.mcl@?????.???>
Cc: Amsat <amsat-bb@?????.???>
Subject: Re: [amsat-bb] SAT32PC question
Message-ID:
<CAKu8kHDn4OZt6fKW1aJxJP3e8KbAZnF9dO5NM5gqSkR4b0P+Mw@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Here is a "revolutionary" thought:..... there is a manual :-)
73, Stefan VE4SW
On Wed, May 6, 2020 at 4:20 PM Paul Mcl via AMSAT-BB <amsat-bb@?????.???>
wrote:
> Thanks guys, that was the missing link.
>
> Regards
>
> Paul
>
> On Wed, 6 May 2020 at 21:55, Michael Walker <va3mw@??????????.???> wrote:
>
> > Hi Paul
> >
> > I did this video for new users that might help you out.
> >
> > https://youtu.be/JLdROrcY7fY
> >
> > When you don't have a frequency it is due to the fact that the
> doppler.sqf
> > file doesn't have an entry.
> >
> > Here are my entries.
> >
> > PO-101,145.900,437.500,FM,FM,NOR,0,0,FM Voice
> > CAS-4A,145870.0,435219.2,USB,LSB,REV,0,0,SSB
> > CAS-4A,145855.0,0,USB,LSB,REV,0,0,CW Beacon
> > CAS-4B,145925.0,435279,USB,LSB,REV,0,0,SSB
> > CAS-4B,145910.0,0,USB,LSB,REV,0,0,Beacon
> >
> > Mike va3mw
> >
> >
> > On Wed, May 6, 2020 at 4:39 PM Paul Mcl via AMSAT-BB <amsat-bb@?????.???
> >
> > wrote:
> >
> >> Apologies for what could be an easy question but I am a bit new to this.
> >> Just getting the station set up at the moment.
> >>
> >> I have installed SAT32PC and have it tracking a number of the amateur
> >> satellites. I have noticed a few sats including PO101, CAS4A and 4B
> don?t
> >> have any frequency info shown in the window above the map.
> >>
> >> Not sure how to resolve this so any help appreciated.
> >>
> >> Thanks
> >>
> >> Paul MM0ZBH
> >> _______________________________________________
> >> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> >> to all interested persons worldwide without requiring membership.
> >> Opinions expressed
> >> are solely those of the author, and do not reflect the official views of
> >> AMSAT-NA.
> >> Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> >> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
> >>
> >
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 5
Date: Wed, 06 May 2020 18:29:54 -0400
From: "Steve Kristoff" <skristof@???????.???>
To: Amsat <amsat-bb@?????.???>
Subject: Re: [amsat-bb] SDRSharp
Message-ID: <b604762f2d467b2066eb948d41f626bf@???????.???>
Content-Type: text/plain; charset=UTF-8
Thanks for the quick support on my SDRSharp question folks. It's coming
together.
Steve AI9IN
?
----- Original Message -----
------------------------------
Message: 6
Date: Wed, 6 May 2020 22:36:35 +0000
From: "D. Craig Fox" <DCFox@??????.???>
To: 'Stefan Wagener' <wageners@?????.???>, Paul Mcl
<paul.mcl@?????.???>, "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: Re: [amsat-bb] SAT32PC question
Message-ID: <ea29898d4f25437aac33283e53b41b5a@??????.???.???>
Content-Type: text/plain; charset="utf-8"
There is also this from AMSAT-UK
https://amsat-uk.org/2013/11/23/adding-new-satellites-to-satpc32/
73,
Craig
N6RSX
-----Original Message-----
From: AMSAT-BB <amsat-bb-bounces@?????.???> On Behalf Of Stefan Wagener via
AMSAT-BB
Sent: Wednesday, May 6, 2020 2:52 PM
To: Paul Mcl <paul.mcl@?????.???>
Cc: Amsat <amsat-bb@?????.???>
Subject: Re: [amsat-bb] SAT32PC question
Here is a "revolutionary" thought:..... there is a manual :-)
73, Stefan VE4SW
On Wed, May 6, 2020 at 4:20 PM Paul Mcl via AMSAT-BB <amsat-bb@?????.???>
wrote:
> Thanks guys, that was the missing link.
>
> Regards
>
> Paul
>
> On Wed, 6 May 2020 at 21:55, Michael Walker <va3mw@??????????.???> wrote:
>
> > Hi Paul
> >
> > I did this video for new users that might help you out.
> >
> > https://youtu.be/JLdROrcY7fY
> >
> > When you don't have a frequency it is due to the fact that the
> doppler.sqf
> > file doesn't have an entry.
> >
> > Here are my entries.
> >
> > PO-101,145.900,437.500,FM,FM,NOR,0,0,FM Voice
> > CAS-4A,145870.0,435219.2,USB,LSB,REV,0,0,SSB
> > CAS-4A,145855.0,0,USB,LSB,REV,0,0,CW Beacon
> > CAS-4B,145925.0,435279,USB,LSB,REV,0,0,SSB
> > CAS-4B,145910.0,0,USB,LSB,REV,0,0,Beacon
> >
> > Mike va3mw
> >
> >
> > On Wed, May 6, 2020 at 4:39 PM Paul Mcl via AMSAT-BB
> > <amsat-bb@?????.???
> >
> > wrote:
> >
> >> Apologies for what could be an easy question but I am a bit new to this.
> >> Just getting the station set up at the moment.
> >>
> >> I have installed SAT32PC and have it tracking a number of the
> >> amateur satellites. I have noticed a few sats including PO101,
> >> CAS4A and 4B
> don?t
> >> have any frequency info shown in the window above the map.
> >>
> >> Not sure how to resolve this so any help appreciated.
> >>
> >> Thanks
> >>
> >> Paul MM0ZBH
> >> _______________________________________________
> >> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
> >> available to all interested persons worldwide without requiring
membership.
> >> Opinions expressed
> >> are solely those of the author, and do not reflect the official
> >> views of AMSAT-NA.
> >> Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> >> Subscription settings:
> >> https://www.amsat.org/mailman/listinfo/amsat-bb
> >>
> >
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership.
> Opinions expressed are solely those of the author, and do not reflect
> the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available to all
interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
(If this message is spam, please report it to IT Dept. Thank you.)
------------------------------
Message: 7
Date: Wed, 6 May 2020 19:02:22 -0400
From: Nick KE8AKW <nicholasmahr1@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] New Yaesu G-5500DC
Message-ID:
<CAGu+VYvthC6idh=0MDD2Aoszhheb58VpSJO4x4LThBZXYN30vA@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Yes. The brand new version of the G-5500 with the "DC" at the end is not
compatible with anything before it, as they are now using 22V DC to drive
the G5500DC rather then a regular G5500 that uses 24V AC. So that means a
G5500DC motor is not compatible with a G5500 Control box, and vice versa.
As for why they changed their motors to DC, I dont really know. But
something to look out for sure.
73 Nick KE8AKW
------------------------------
Message: 8
Date: Wed, 6 May 2020 19:16:50 -0400
From: Brian Wilkins KO4AQF <bwilkins@?????.???>
To: Steve Kristoff <skristof@???????.???>
Cc: Amsat <amsat-bb@?????.???>
Subject: Re: [amsat-bb] SDRSharp
Message-ID:
<CAO_Eq33iJ8jkgTeh=_n1nHmyZBtA0cNBg14dVaYf=wp+zOC5-Q@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Steve
I just checked my laptop and looks like I am running sdrsharp1361. I also
had to run the zadig tool. If needing Orbitron, I had to install the
SDRSharp.SatellteTracker.dll (SatelliteTracker2) then do the necessary
configuration updates to Orbitron to get it to connect to SDR#. Looks like
I also installed the RTLSDR drivers.
You didn?t mention Orbitron though just in case someone else needs it. This
version provides the best support I found.
I have all the files and can package them up for anyone if needed.
On Wed, May 6, 2020 at 6:32 PM Steve Kristoff via AMSAT-BB <
amsat-bb@?????.???> wrote:
>
> Thanks for the quick support on my SDRSharp question folks. It's coming
> together.
> Steve AI9IN
>
> ----- Original Message -----
>
>
>
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Brian Wilkins
KO4AQF
------------------------------
Message: 9
Date: Wed, 6 May 2020 19:48:16 -0400
From: Michael Walker <va3mw@??????????.???>
To: Amsat <amsat-bb@?????.???>
Subject: Re: [amsat-bb] SAT32PC question
Message-ID:
<CA+33ts4HoMs0V2kQDpj+-QWhHxyuXcB+EcS8v4+DYYvvchFYwQ@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Nice comment... it really isn't useful if you are swimming in tech.
I have to admit I have never been in a group where it is often said, but
the AMSAT group is the leader.... read the manual but without any help to
clarify the terms.
Sometimes, you actually need to teach.
Mike va3mw
On Wed, May 6, 2020 at 5:52 PM Stefan Wagener <wageners@?????.???> wrote:
> Here is a "revolutionary" thought:..... there is a manual :-)
>
> 73, Stefan VE4SW
>
> On Wed, May 6, 2020 at 4:20 PM Paul Mcl via AMSAT-BB <amsat-bb@?????.???>
> wrote:
>
>> Thanks guys, that was the missing link.
>>
>> Regards
>>
>> Paul
>>
>> On Wed, 6 May 2020 at 21:55, Michael Walker <va3mw@??????????.???> wrote:
>>
>> > Hi Paul
>> >
>> > I did this video for new users that might help you out.
>> >
>> > https://youtu.be/JLdROrcY7fY
>> >
>> > When you don't have a frequency it is due to the fact that the
>> doppler.sqf
>> > file doesn't have an entry.
>> >
>> > Here are my entries.
>> >
>> > PO-101,145.900,437.500,FM,FM,NOR,0,0,FM Voice
>> > CAS-4A,145870.0,435219.2,USB,LSB,REV,0,0,SSB
>> > CAS-4A,145855.0,0,USB,LSB,REV,0,0,CW Beacon
>> > CAS-4B,145925.0,435279,USB,LSB,REV,0,0,SSB
>> > CAS-4B,145910.0,0,USB,LSB,REV,0,0,Beacon
>> >
>> > Mike va3mw
>> >
>> >
>> > On Wed, May 6, 2020 at 4:39 PM Paul Mcl via AMSAT-BB <
>> amsat-bb@?????.???>
>> > wrote:
>> >
>> >> Apologies for what could be an easy question but I am a bit new to
>> this.
>> >> Just getting the station set up at the moment.
>> >>
>> >> I have installed SAT32PC and have it tracking a number of the amateur
>> >> satellites. I have noticed a few sats including PO101, CAS4A and 4B
>> don?t
>> >> have any frequency info shown in the window above the map.
>> >>
>> >> Not sure how to resolve this so any help appreciated.
>> >>
>> >> Thanks
>> >>
>> >> Paul MM0ZBH
>> >> _______________________________________________
>> >> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> >> to all interested persons worldwide without requiring membership.
>> >> Opinions expressed
>> >> are solely those of the author, and do not reflect the official views
>> of
>> >> AMSAT-NA.
>> >> Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>> >> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>> >>
>> >
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>
>
------------------------------
Message: 10
Date: Wed, 6 May 2020 19:57:38 -0400
From: Dave Webb KB1PVH <kb1pvh@?????.???>
To: Ted Krempa <k7trkradio@???????.???>
Cc: AMSAT BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] SAT32PC question
Message-ID:
<CAEMY9Fep_eSr_Qt25676Da5js035c+GxGu4jyyJgE8VM89wYmg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Ted,
The nasabare is only the TLE which is what's used to track the satellite.
The doppler.sqf is the actual frequency and mode info for each satellite
that only needs to be added to when a new satellite is added. I'm not sure
where HRD gets the frequency and tone info when a new satellite is launched
if you don't manually put it in. HRD works fine I guess for FM but totally
blows it on the SSB birds unless they really have fixed things.
Dave-KB1PVH
Sent from my Galaxy S9
On Wed, May 6, 2020, 7:32 PM Ted Krempa <k7trkradio@???????.???> wrote:
> Thanks for the answer to Paul, Dave...
>
> Brings up a question that has always puzzled me about Sat32PC...does one
> need to be constantly updating the sqf file? I would think that 'updating'
> function would bring in all that info, from, i.e.., the nasabare update.
> (This is what HRD does)...(same question for the 'tone' file) It seems
> SATPC needs constant massaging, which is one reason I have never been able
> to find it functional..
>
> Anyway, say hi to the horses !!
>
> 73, Ted
> K7TRK
>
> -----Original Message-----
> From: AMSAT-BB [mailto:amsat-bb-bounces@?????.???? On Behalf Of Dave Webb
> KB1PVH via AMSAT-BB
> Sent: Wednesday, May 6, 2020 1:53 PM
> To: Paul Mcl
> Cc: Amsat
> Subject: Re: [amsat-bb] SAT32PC question
>
> Paul,
>
> You need to make entries in the doppler.sqf file with the frequency info.
> Here's a write up that should help you out.
>
> amsat-uk.org/2013/11/23/adding-new-satellites-to-satpc32/amp/
>
> Also there's a Doppler.sqf line generator that's on the AMSAT website where
> you plug in frequencies and modes and it will generate the proper info.
>
> https://www.amsat.org/doppler-sqf-line-generator/
>
> Dave-KB1PVH
>
>
> Sent from my Galaxy S9
>
> On Wed, May 6, 2020, 4:40 PM Paul Mcl via AMSAT-BB <amsat-bb@?????.???>
> wrote:
>
> > Apologies for what could be an easy question but I am a bit new to this.
> > Just getting the station set up at the moment.
> >
> > I have installed SAT32PC and have it tracking a number of the amateur
> > satellites. I have noticed a few sats including PO101, CAS4A and 4B
> don?t
> > have any frequency info shown in the window above the map.
> >
> > Not sure how to resolve this so any help appreciated.
> >
> > Thanks
> >
> > Paul MM0ZBH
> > _______________________________________________
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions
> > expressed
> > are solely those of the author, and do not reflect the official views of
> > AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
> >
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
>
------------------------------
Message: 11
Date: Thu, 7 May 2020 01:18:52 +0000 (UTC)
From: BeetleJerald Oliver <revjwo@???.???>
To: AMSAT BB <amsat-bb@?????.???>
Subject: [amsat-bb] Fw: 2M desense on Icom IC-9700
Message-ID: <1021528606.1747113.1588814332764@????.?????.???>
Content-Type: text/plain; charset=UTF-8
----- Forwarded Message ----- From: BeetleJerald Oliver
<revjwo@???.???>To: amsat-bb@?????.??? <amsat-bb@?????.???>Sent: Wednesday,
May 6, 2020, 02:55:41 PM CDTSubject: 2M desense on Icom IC-9700
I just replaced my Yaesu FT-847 with the Icom IC-9700.? I am having problem
with 2M uplink overloading (desense) the 70CM downlink, resulting in not
being able to use RS-44, FO-29, or SO-50.? It is the same antenna system
that I used with the FT-847 and I experienced no problem at all with the
FT-847.? SWR on both VHF/UHF is quite low using M2 CP yagis on fiberglas
boom, 11 feet apart.? I have the problem whether I use the preamps, or not.?
Even at 5W out, it is quite noticeable. Anyone else had this problem? ?
KJ4EU ?? Jerry
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@?????.???.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 15, Issue 144
*****************************************
Read previous mail | Read next mail
| |
