| |
CX2SA > SATDIG 27.05.20 03:35l 715 Lines 22498 Bytes #999 (0) @ WW
BID : AMSATBB15176
Read: GUEST
Subj: AMSAT-BB-digest V15 176
Path: IW8PGT<LU4ECL<HR1PAQ<CX2SA
Sent: 200527/0131Z @:CX2SA.SAL.URY.SOAM #:32180 [Salto] FBB7.00e $:AMSATBB15176
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Re: Tablet for SatPC32 (Paul Stoetzer)
2. Re: RS-44 VU noise from TX (tjschuessler@???????.????
3. Re: RS-44 VU noise from TX (Roy Dean)
4. ARR mast mount preamps (Richard Lawn)
5. Re: ARR mast mount preamps (Cathryn Mataga)
6. Re: ARR mast mount preamps (Dave Webb KB1PVH)
7. Re: ARR mast mount preamps (Mike Seguin)
8. Re: ARR mast mount preamps (Bob Hammond)
9. Re: ARR mast mount preamps (Zach Metzinger)
10. RS-44 Satpc32 doppler (Michael A. Foster)
11. Re: ARR mast mount preamps (PY5LF)
12. Re: RS-44 Satpc32 doppler (Mark L. Hammond)
13. IARU-R2 "Satellite Communications 101" workshop (online)
(Patrick STODDARD (WD9EWK/VA7EWK))
14. FT-847 repair service (Richard Lawn)
15. Re: ARR mast mount preamps (Bob Hammond)
----------------------------------------------------------------------
Message: 1
Date: Mon, 25 May 2020 13:39:25 -0400
From: Paul Stoetzer <n8hm@????.???>
To: Bob Hammond <propgrinder@?????.???>
Cc: amsat-bb@?????.???
Subject: Re: [amsat-bb] Tablet for SatPC32
Message-ID:
<CABzOSOr2VSVpKfsW8aVkzP5CJWxvPs9tAkKgi_wAVWYO85Xe0Q@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
As with most things, it depends on your budget. Windows tablets had quite a
moment a few years ago where you could get a 7? model for under $100 and 8?
models for under $200, but they were ultimately not very good devices and
7? or 8? really doesn?t work well for Windows. 10.1? is really the minimum
screen size to be useful for a Windows device.
Right now there are two choices to consider in the under $500 range at the
10 inch screen size. For the low end, there?s the Chuwi Hi 10x which is
$229 on Amazon. If you don?t want to go with the cheap Chinese brand, your
only choice in that price range is the Microsoft Surface Go 2, which just
came out two weeks ago and starts at $399 for the minimum spec. You may
also find remaining NOS Surface Go 1st generations available for less.
Above $500, there are lots of other choices out there, but they are
overkill if you?re looking for a small device just to take roving.
Any of these will run virtually any amateur radio software, including
SatPC32, without a problem. Note that the Surface Go tablets come with
Windows 10 running in S mode, which restricts software availability to the
Windows Store only. Fortunately, it?s just a quick setting change to take
it out of S mode and get full Windows 10 Home.
73,
Paul, N8HM
On Mon, May 25, 2020 at 13:19 Bob Hammond via AMSAT-BB <amsat-bb@?????.???>
wrote:
> I'm in the market for a tablet to take roving. I want to use SatPC32 so
> that means some version of Windows.
>
> Any suggestions on a Windows tablet?
>
> Bob W7OTJ
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 2
Date: Mon, 25 May 2020 14:24:35 -0500
From: <tjschuessler@???????.???>
To: <amsat-bb@?????.???>
Subject: Re: [amsat-bb] RS-44 VU noise from TX
Message-ID: <002901d632ca$2028b690$607a23b0$@???????.???>
Content-Type: text/plain; charset="us-ascii"
When I started setting up to the 145 up 435 down satellites, I experienced
this issue badly. The best solution I found was to use two separate
Diplexer to feed my Arrow on a tripod. I ended up using a triplexer for the
2 meter side and a diplexer for the 70CM side. The dual filtering seems to
clean up all the third harmonic crud. Some folks recommend a 50 Ohm
terminator for unused ports but I most of the time don't use one. I put my
preamps on the inside of the diplexers as filters because the loss is small
on the diplexer and filtering before the preamp will go a long way.
Limiting power is also a help. Most of our linear birds are pretty
sensitive so keeping our transmitters down to a very low transmit output is
best for the satellite
Now the comment was relating to SDR devices for the RX side, depending on
what you have, some of these have very poor RF shielding so that in itself
is a real problem
Tom Schuessler, N5HYP
EM12ms
_______________
Message:
Date: Sun, 24 May 2020 20:43:27 +0200 (CEST)
From: mailto:on4cjq@???????.??
To: Andy Brian <mailto:briaandy@?????.???>
Cc: amsat-bb <mailto:amsat-bb@?????.???>
Subject: Re: [amsat-bb] RS-44 VU noise from TX
Message-ID:
<mailto:1647041245.475312887.1590345807957.JavaMail.zimbra@???????.??>
Content-Type: text/plain; charset=utf-8
Hoi,
Instead of putting a diplexer as filter( best is to use 1 per band), if you
have the possibilty to make stuff your own, just 'split' a diplexer by
making an LPF (low pass filter) at the 2m antenne and a HPF ( high pass
filter) at the 70cm antenne. Or find some to buy (MINI CIRCUITS maybe?).
This way you have a filter at both antennas. Mostly a diplexer is used only
on one antenna, while the other diplexer port is closed with a small dummy
load.
Keep in mind the tx-pwr!
Best 73's
Jerry,ON4CJQ
------------------------------
Message: 3
Date: Mon, 25 May 2020 16:03:12 -0400
From: Roy Dean <royldean@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] RS-44 VU noise from TX
Message-ID:
<CADGPg2tZDYKu6BfLc8mwDUrf8coOvgL1hebYyHJhwPp66jGOwA@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
>
> Now the comment was relating to SDR devices for the RX side, depending on
> what you have, some of these have very poor RF shielding so that in itself
> is a real problem Tom Schuessler, N5HYP
> EM12ms
Just as another data point - I use an $20 RTL-SDR.com V3 Dongle for the
downlinks on almost all the FM and SSB satellites (yep, the plan was always
to upgrade but it's been working so well that I haven't found a huge need
to spend money on a real SDR or traditional receiver).
I have MFJ 916 diplexers at the mast acting as band pass filters. This
has been working for me on all satellites except for SO-50 and FO-29. I
can get receiver blowout on the 70cm downlink birds (LilacSat-2 and RS-44,
for example) if I am not careful with my usage of my ARR pre-amps (located
at the antennas) or the SDR gain setting, but ultimately I've had good luck
on those. SO-50 and FO-29 don't seem to be workable no matter what
combination of pre-amp and SDR gain setting I use. I haven't had an
opportunity to try out HO-107 yet, so can't comment on my "el cheapo" setup
on that bird. For SO-50 I just use my D710G, and I haven't had much
opportunity to use FO-29 lately anyway.
--Roy
K3RLD
------------------------------
Message: 4
Date: Mon, 25 May 2020 20:30:17 -0400
From: Richard Lawn <rjlawn@?????.???>
To: Amsat BB <amsat-bb@?????.???>
Subject: [amsat-bb] ARR mast mount preamps
Message-ID:
<CADQmrTELu36TJx51L5=S5ZeF9xX6zomGq4SmPxwkZG48rGAk2A@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
I just learned that they are no longer making the mast series preamps.
Tragic. Anyone know where I can find an alternative for 70 cm other than
SSB Electronics that I think may only be available from Germany?
Rick, W2JAZ
--
Sent from Gmail Mobile
------------------------------
Message: 5
Date: Mon, 25 May 2020 17:36:12 -0700
From: Cathryn Mataga <cathryn@????????????.???>
To: Amsat BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] ARR mast mount preamps
Message-ID: <16f9ac70-cae2-3fb6-9398-6ad2b1e66239@????????????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
I recently ordered a DBA-270 from Ham Radio Outlet. (have yet to put it
up through, but this year, for sure.)
On 5/25/20 5:30 PM, Richard Lawn via AMSAT-BB wrote:
> I just learned that they are no longer making the mast series preamps.
> Tragic. Anyone know where I can find an alternative for 70 cm other than
> SSB Electronics that I think may only be available from Germany?
>
> Rick, W2JAZ
>
>
------------------------------
Message: 6
Date: Mon, 25 May 2020 20:39:50 -0400
From: Dave Webb KB1PVH <kb1pvh@?????.???>
To: AMSAT -BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] ARR mast mount preamps
Message-ID:
<CAEMY9FcPNdsFEBv3JNtwcO-mSe-yMithdJ4tQrcMyjrZ1g5Jpg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Richard,
You can get the SSB preamps from HRO.
Dave-KB1PVH
Sent from my Galaxy S9
On Mon, May 25, 2020, 8:32 PM Richard Lawn via AMSAT-BB <amsat-bb@?????.???>
wrote:
> I just learned that they are no longer making the mast series preamps.
> Tragic. Anyone know where I can find an alternative for 70 cm other than
> SSB Electronics that I think may only be available from Germany?
>
> Rick, W2JAZ
>
>
> --
> Sent from Gmail Mobile
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 7
Date: Tue, 26 May 2020 07:11:52 -0400
From: Mike Seguin <n1jez@?????????????????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] ARR mast mount preamps
Message-ID:
<2621446b-93a8-29d8-0d76-a725a8fb0273@?????????????????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
https://vhfdesign.com/
http://www.shf-elektronik.de/en/index.htm
Mike
On 5/25/2020 8:30 PM, Richard Lawn via AMSAT-BB wrote:
> I just learned that they are no longer making the mast series preamps.
> Tragic. Anyone know where I can find an alternative for 70 cm other than
> SSB Electronics that I think may only be available from Germany?
>
> Rick, W2JAZ
>
>
--
73,
Mike, N1JEZ
"A closed mouth gathers no feet"
------------------------------
Message: 8
Date: Tue, 26 May 2020 05:15:36 -0700
From: Bob Hammond <propgrinder@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] ARR mast mount preamps
Message-ID:
<CAKoB7OrhUgk2c6Pxp38MPK_0R4J3ttytSfb5u9-54TZMwmh6vA@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
https://www.minikits.com.au/electronic-kits/rf-amplifiers/rf-preamplifiers
I'm building a 70cm and 23cm kit right now. Very nicely put together. You
can also buy them assembled.
Bob W7OTJ
On Tue, May 26, 2020 at 4:14 AM Mike Seguin via AMSAT-BB <amsat-bb@?????.???>
wrote:
> https://vhfdesign.com/
>
> http://www.shf-elektronik.de/en/index.htm
>
> Mike
>
> On 5/25/2020 8:30 PM, Richard Lawn via AMSAT-BB wrote:
> > I just learned that they are no longer making the mast series preamps.
> > Tragic. Anyone know where I can find an alternative for 70 cm other than
> > SSB Electronics that I think may only be available from Germany?
> >
> > Rick, W2JAZ
> >
> >
>
> --
>
> 73,
> Mike, N1JEZ
> "A closed mouth gathers no feet"
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 9
Date: Tue, 26 May 2020 09:58:33 -0500
From: Zach Metzinger <zmetzing@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] ARR mast mount preamps
Message-ID: <45ef028e-a89a-d5fb-4cab-ceb30b95b3ef@?????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
On 05/26/20 07:15, Bob Hammond via AMSAT-BB wrote:
> https://www.minikits.com.au/electronic-kits/rf-amplifiers/rf-preamplifiers
>
> I'm building a 70cm and 23cm kit right now. Very nicely put together. You
> can also buy them assembled.
Neat that they're using the Omrom G2RL-2 relays for switching RF. An
inexpensive solution!
I used the TE HF3 relays in my 70cm design, but they are relatively
expensive to the (not-RF-rated) G2RL-2. I'll have to try the latter on
the next spin!
--- Zach
N0ZGO
------------------------------
Message: 10
Date: Tue, 26 May 2020 12:01:52 -0400
From: "Michael A. Foster" <akx2@?????.???>
To: <AMSAT-BB@?????.???>
Subject: [amsat-bb] RS-44 Satpc32 doppler
Message-ID: <497EAFC27A3A42059CBE3B4B6EA89B04@?????????>
Content-Type: text/plain; charset="utf-8"
Any body got the Doppler.Sqf file for RS-44? TNX, Michael ? n8iup
------------------------------
Message: 11
Date: Tue, 26 May 2020 13:20:05 -0300
From: PY5LF <py5lf@?????????????.???.??>
To: Bob Hammond <propgrinder@?????.???>
Cc: AMSAT-BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] ARR mast mount preamps
Message-ID:
<CAAy53m5T=H-5qy7RahNqe=SysMF+w=RST82hu560rnMVaLh7GQ@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Hi Bob
How about the performance of these pre amplifiers ?
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign
=sig-email&utm_content=webmail>
Livre
de v?rus. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign
=sig-email&utm_content=webmail>.
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
Em ter., 26 de mai. de 2020 ?s 09:19, Bob Hammond via AMSAT-BB <
amsat-bb@?????.???> escreveu:
> https://www.minikits.com.au/electronic-kits/rf-amplifiers/rf-preamplifiers
>
> I'm building a 70cm and 23cm kit right now. Very nicely put together. You
> can also buy them assembled.
>
> Bob W7OTJ
>
> On Tue, May 26, 2020 at 4:14 AM Mike Seguin via AMSAT-BB <
> amsat-bb@?????.???>
> wrote:
>
> > https://vhfdesign.com/
> >
> > http://www.shf-elektronik.de/en/index.htm
> >
> > Mike
> >
> > On 5/25/2020 8:30 PM, Richard Lawn via AMSAT-BB wrote:
> > > I just learned that they are no longer making the mast series preamps.
> > > Tragic. Anyone know where I can find an alternative for 70 cm other
> than
> > > SSB Electronics that I think may only be available from Germany?
> > >
> > > Rick, W2JAZ
> > >
> > >
> >
> > --
> >
> > 73,
> > Mike, N1JEZ
> > "A closed mouth gathers no feet"
> > _______________________________________________
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions
> > expressed
> > are solely those of the author, and do not reflect the official views of
> > AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
> >
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
--
*PY5LF *
*Luciano Fabricio*
*www.falautomation.com.br <http://www.falautomation.com.br>*
------------------------------
Message: 12
Date: Tue, 26 May 2020 12:42:03 -0400
From: "Mark L. Hammond" <marklhammond@?????.???>
To: "Michael A. Foster" <akx2@?????.???>
Cc: Amsat - BBs <AMSAT-BB@?????.???>
Subject: Re: [amsat-bb] RS-44 Satpc32 doppler
Message-ID:
<CAPRXzyouT9PhBQx2J+9y3SbJkikVnJ=qf2ewNTAD86HCpewQUw@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Hi Michael,
Try this:
RS-44,435640,145965,USB,LSB,REV,0,0, +/-30kHz xponder
73,
Mark N8MH
On Tue, May 26, 2020 at 12:17 PM Michael A. Foster via AMSAT-BB <
amsat-bb@?????.???> wrote:
> Any body got the Doppler.Sqf file for RS-44? TNX, Michael ? n8iup
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Mark L. Hammond [N8MH]
------------------------------
Message: 13
Date: Tue, 26 May 2020 19:52:39 +0000
From: "Patrick STODDARD (WD9EWK/VA7EWK)" <amsat-bb@??????.???>
To: AMSAT <amsat-bb@?????.???>
Subject: [amsat-bb] IARU-R2 "Satellite Communications 101" workshop
(online)
Message-ID:
<CAN6TEUcUme9H_wGMFd67Bn0LCi53s2zNoy43U9em_NjMu7U4JQ@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Hi!
Region 2 of the International Amateur Radio Union (IARU-R2) has begun
hosting video workshops covering different facets of amateur radio.
Last Wednesday (20 May), there was a "Satellite Communications 101"
workshop in Spanish hosted by Matias Graino LU9CBL and Guillermo
Guerra OA4/XQ3SA (an AMSAT Ambassador). Their workshop had over 40
attendees from many countries in the Americas via Zoom, along with
others watching a live stream via YouTube. A replay of their
presentation is available at:
https://www.youtube.com/watch?v=69D1dJEfGDc
The next IARU-R2 workshop will be another "Satellite Communications
101" presentation, targeting novices to satellite operating - this time
in English. This presentation will take place on Wednesday, 27 May
2020, at 2359 UTC (7.59pm EDT/4.59pm PDT). I am the presenter for this
week's workshop. A link to register for this workshop, and other
upcoming IARU-R2 workshops, is available at:
https://www.iaru-r2.org/en/news-and-events/workshops/
There is a limit on the number of attendees who can participate via
Zoom. If you want to watch the presentation without registering for the
workshop, a live stream will be available from the "IARU - Region 2
Workshops" YouTube channel:
https://www.youtube.com/channel/UCnG2Srz0bsKmTbF2r3YNneQ
A video of Wednesday's workshop will be posted on this YouTube channel
sometime after the conclusion of the workshop.
Thanks, and 73!
Patrick WD9EWK/VA7EWK
http://www.wd9ewk.net/
Twitter: @?????? or http://twitter.com/WD9EWK
------------------------------
Message: 14
Date: Tue, 26 May 2020 20:53:09 -0400
From: Richard Lawn <rjlawn@?????.???>
To: Amsat BB <amsat-bb@?????.???>
Subject: [amsat-bb] FT-847 repair service
Message-ID:
<CADQmrTHLBKbw=XOibY=ggucFJGH3MTMJEKg8MvdVz2BE+ETxiw@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
I?m not certain yet but I think the used 847 I bought to use at our summer
place has some problems in VHF/UHF. If I?m right does anyone have
recommendations on a repair service, or I?m I better of sending it to Yaesu?
Rick, W2JAZ
--
Sent from Gmail Mobile
------------------------------
Message: 15
Date: Tue, 26 May 2020 18:24:10 -0700
From: Bob Hammond <propgrinder@?????.???>
To: PY5LF <py5lf@?????????????.???.??>
Cc: AMSAT-BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] ARR mast mount preamps
Message-ID:
<CAKoB7OpJZiTWX_C0On0YV4GzaRJxVWPwwNarc80Mgkz65qqtgQ@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Luciano,
I don't have them installed yet. You can see the specification on the
Minikits website.
Bob
On Tue, May 26, 2020 at 9:20 AM PY5LF <py5lf@?????????????.???.??> wrote:
> Hi Bob
> How about the performance of these pre amplifiers ?
>
>
>
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign
=sig-email&utm_content=webmail> Livre
> de v?rus. www.avast.com
>
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign
=sig-email&utm_content=webmail>.
> <#m_4645937424102457190_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> Em ter., 26 de mai. de 2020 ?s 09:19, Bob Hammond via AMSAT-BB <
> amsat-bb@?????.???> escreveu:
>
>> https://www.minikits.com.au/electronic-kits/rf-amplifiers/rf-preamplifiers
>>
>> I'm building a 70cm and 23cm kit right now. Very nicely put together.
>> You
>> can also buy them assembled.
>>
>> Bob W7OTJ
>>
>> On Tue, May 26, 2020 at 4:14 AM Mike Seguin via AMSAT-BB <
>> amsat-bb@?????.???>
>> wrote:
>>
>> > https://vhfdesign.com/
>> >
>> > http://www.shf-elektronik.de/en/index.htm
>> >
>> > Mike
>> >
>> > On 5/25/2020 8:30 PM, Richard Lawn via AMSAT-BB wrote:
>> > > I just learned that they are no longer making the mast series preamps.
>> > > Tragic. Anyone know where I can find an alternative for 70 cm other
>> than
>> > > SSB Electronics that I think may only be available from Germany?
>> > >
>> > > Rick, W2JAZ
>> > >
>> > >
>> >
>> > --
>> >
>> > 73,
>> > Mike, N1JEZ
>> > "A closed mouth gathers no feet"
>> > _______________________________________________
>> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> > to all interested persons worldwide without requiring membership.
>> Opinions
>> > expressed
>> > are solely those of the author, and do not reflect the official views of
>> > AMSAT-NA.
>> > Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>> >
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>
>
>
> --
> *PY5LF *
> *Luciano Fabricio*
> *www.falautomation.com.br <http://www.falautomation.com.br>*
>
>
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@?????.???.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 15, Issue 176
*****************************************
Read previous mail | Read next mail
| |
