| |
CX2SA > SATDIG 07.06.20 01:15l 801 Lines 24524 Bytes #999 (0) @ WW
BID : AMSATBB15186
Read: GUEST
Subj: AMSAT-BB-digest V15 186
Path: IW8PGT<IR2UBX<IW0QNL<OK0NBR<F3KT<CX2SA
Sent: 200606/2312Z @:CX2SA.SAL.URY.SOAM #:33060 [Salto] FBB7.00e $:AMSATBB15186
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Re: Doppler.SQF (David Worboys)
2. Active Satellites Doppler .SQF File (Les Rayburn)
3. Re: Active Satellites Doppler .SQF File (Mark L. Hammond)
4. Re: Doppler.SQF (Mineo Wakita)
5. Re: Doppler.SQF (David Worboys)
6. Re: Doppler.SQF (Dave Webb KB1PVH)
7. Re: Doppler.SQF (Mark L. Hammond)
8. Re: Alpha Spid Rotator (Edward R Cole)
9. Re: Doppler.SQF (Bill Booth)
10. PacsatGround Software (wb7qxu@????.????
11. Re: PacsatGround Software (Kevin)
12. Re: Antenna Location (bernd1peters@?????.????
13. Re: Doppler.SQF (bernd1peters@?????.????
14. Doppler.sqf (Bob)
----------------------------------------------------------------------
Message: 1
Date: Sat, 6 Jun 2020 11:30:34 -0400
From: David Worboys <kg4zlb@??????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] Doppler.SQF
Message-ID: <AC1C9F40-27AE-45DF-ABF8-B6D1317A3FFB@??????.???>
Content-Type: text/plain; charset=utf-8
Many thanks to Mark, N8MH
On Jun 6, 2020, at 10:56 AM, David Worboys via AMSAT-BB <amsat-bb@?????.???>
wrote:
Morning all,
Would anyone be kind enough to send me a copy of their up to date
Doppler.SQF file for SatPC32 ? I have a funny feeling that I am more than
likely to ?fat-finger? the manual input of the satellites that are not
already loaded and would like to avoid that headache if at all possible!
Many thanks
David
KG4ZLB
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 2
Date: Sat, 6 Jun 2020 10:55:06 -0500
From: Les Rayburn <les@????????????.???>
To: amsat-bb@?????.???
Subject: [amsat-bb] Active Satellites Doppler .SQF File
Message-ID: <64F4938C-EB88-45C5-AC21-2AD6834F0638@????????????.???>
Content-Type: text/plain; charset=utf-8
The link to Mineo?s updated Doppler.SQF file is a great resource. Thanks
also to Mark for sharing it. I frequently take long breaks from the hobby
when work demands, and getting active on satellites again after a hiatus is
always a challenge. This helps a lot.
I?m most active on voice satellites, linear birds and FM. Which satellites
are the most active currently to look for contacts?
73,
Les Rayburn, N1LF
Maylene, AL
EM63nf
AMSAT #38965, ARRL Life Member, CVHS Life Member, SVHF Member
------------------------------
Message: 3
Date: Sat, 6 Jun 2020 12:04:37 -0400
From: "Mark L. Hammond" <marklhammond@?????.???>
To: Les Rayburn <les@????????????.???>
Cc: amsat-bb@?????.???
Subject: Re: [amsat-bb] Active Satellites Doppler .SQF File
Message-ID:
<CAPRXzyp-FhfpDcW1XYBq2q3bnczVBaPKpZg684_RAtFTG9CXLQ@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Hi Les. This is one of the best places to see what is operational. Another
good one to bookmark. Or make it your browser?s startup page ;)
https://www.amsat.org/status/
73,
Mark N8MH
On Sat, Jun 6, 2020 at 11:56 AM Les Rayburn via AMSAT-BB <amsat-bb@?????.???>
wrote:
> The link to Mineo?s updated Doppler.SQF file is a great resource. Thanks
> also to Mark for sharing it. I frequently take long breaks from the hobby
> when work demands, and getting active on satellites again after a hiatus is
> always a challenge. This helps a lot.
>
> I?m most active on voice satellites, linear birds and FM. Which satellites
> are the most active currently to look for contacts?
>
>
>
> 73,
>
> Les Rayburn, N1LF
> Maylene, AL
> EM63nf
> AMSAT #38965, ARRL Life Member, CVHS Life Member, SVHF Member
>
>
>
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Mark L. Hammond [N8MH]
------------------------------
Message: 4
Date: 7 Jun 2020 00:59:18 +0900
From: ei7m-wkt@?????????.??.?? (Mineo Wakita)
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] Doppler.SQF
Message-ID: <5EDBBD56.31982.001@????????.?.?????????.??.??>
Content-Type: text/plain; charset="ISO-2022-JP"
Please let me know if I make a miss_typo.
JE9PEL / Mineo Wakita
------------------------------
Message: 5
Date: Sat, 6 Jun 2020 12:12:42 -0400
From: David Worboys <kg4zlb@??????.???>
To: Mineo Wakita <ei7m-wkt@?????????.??.??>
Cc: amsat-bb@?????.???
Subject: Re: [amsat-bb] Doppler.SQF
Message-ID: <DF4B2DCA-DA1C-4508-ABC2-D7451A374EC9@??????.???>
Content-Type: text/plain; charset=us-ascii
I copied the file and rebooted but some frequencies are still not showing in
the main window so maybe I missed a step somewhere - thank you for providing
the file though!
David
KG4ZLB
On Jun 6, 2020, at 11:59 AM, Mineo Wakita via AMSAT-BB <amsat-bb@?????.???>
wrote:
Please let me know if I make a miss_typo.
JE9PEL / Mineo Wakita
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 6
Date: Sat, 6 Jun 2020 12:19:59 -0400
From: Dave Webb KB1PVH <kb1pvh@?????.???>
To: David Worboys <kg4zlb@??????.???>
Cc: AMSAT -BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] Doppler.SQF
Message-ID:
<CAEMY9FeDEfQUZ+aP-wzdW+azvS+R48G8YERXAdWVb01eQ_vnuw@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
You need to make sure the satellite name in doppler.sqf match the name in
the keps EXACTLY.
Also, knowing how to add or modify entries in the doppler.sqf file is a
good skill to have if you plan on using SatPC32. AMSAT has a page that will
generate the the lines for you from info you input.
https://www.amsat.org/doppler-sqf-line-generator/
Dave-KB1PVH
Sent from my Galaxy S9
On Sat, Jun 6, 2020, 12:14 PM David Worboys via AMSAT-BB <amsat-bb@?????.???>
wrote:
> I copied the file and rebooted but some frequencies are still not showing
> in the main window so maybe I missed a step somewhere - thank you for
> providing the file though!
>
>
> David
> KG4ZLB
>
>
>
>
> On Jun 6, 2020, at 11:59 AM, Mineo Wakita via AMSAT-BB <amsat-bb@?????.???>
> wrote:
>
> Please let me know if I make a miss_typo.
>
> JE9PEL / Mineo Wakita
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 7
Date: Sat, 6 Jun 2020 12:25:58 -0400
From: "Mark L. Hammond" <marklhammond@?????.???>
To: David Worboys <kg4zlb@??????.???>
Cc: amsat-bb@?????.???
Subject: Re: [amsat-bb] Doppler.SQF
Message-ID:
<CAPRXzyodPAubywyoLFmwykdstM4KZfijT+24O41UPFS-Cv+sDw@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
David, the satellite names in DOPPLER.sqf must match whatever TLE/Keps file
you?re using. Once you edit DOPPLER.sqf to match, it?s smooth sailing.
I use nasabare.txt so my Doppler file matches those names.
(Yes I know about Amsatnames.TXT, but that may be more work than it?s
worth!)
Mark N8MH.
On Sat, Jun 6, 2020 at 12:14 PM David Worboys via AMSAT-BB <
amsat-bb@?????.???> wrote:
> I copied the file and rebooted but some frequencies are still not showing
> in the main window so maybe I missed a step somewhere - thank you for
> providing the file though!
>
>
> David
> KG4ZLB
>
>
>
>
> On Jun 6, 2020, at 11:59 AM, Mineo Wakita via AMSAT-BB <amsat-bb@?????.???>
> wrote:
>
> Please let me know if I make a miss_typo.
>
> JE9PEL / Mineo Wakita
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Mark L. Hammond [N8MH]
------------------------------
Message: 8
Date: Sat, 06 Jun 2020 08:29:29 -0800
From: Edward R Cole <kl7uw@?????????.???>
To: AMSAT-BB@?????.???
Subject: Re: [amsat-bb] Alpha Spid Rotator
Message-ID: <202006061629.056GTUth022787@?????????.???????????.???>
Content-Type: text/plain; charset="us-ascii"; format=flowed
Note: I am using the Alpha-Spid RAK as azimuth rotator on eme for 50
and 144 MHz. No experience with RAS.
Only have the RAK installed for my 144-eme array of four XP yagis at
this point.
I have about 150-foot cable run and using 8-conductor standard
rotator cable (only four needed by the Spid) I had excessive voltage
loss on the motor lines (dropped to 8vdc). Even paralleling some of
the unused wires did not solve. I finally use a pair of No. 10 wires
to get 12v to the rotator.
I run 18vac into the controller (which has a bridge rectifier) to
obtain 24vdc unloaded on output. Loaded the voltage sags to about
18vdc at the controller, but runs the rotator fine. Use the No. 20
control wires in the original rotor cable for indication with no issues.
I have the 1-degree resolution rotator (good enough for 50 or
144-MHz). Previously, I ran a Ham-IV which only provides 5-degree
movement due to the brake system. Ham-IV was challenged for torque
by the eme array. Spid seems to handle that FB.
73, Ed - KL7UW
http://www.kl7uw.com
Dubus-NA Business mail:
dubususa@?????.???
------------------------------
Message: 9
Date: Sat, 6 Jun 2020 12:31:04 -0400
From: Bill Booth <ve3nxk@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] Doppler.SQF
Message-ID: <4721aa0d-6eaf-f164-fcb3-631620ad37d6@?????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
On 2020-06-06 12:12 p.m., David Worboys via AMSAT-BB wrote:
> so maybe I missed a step somewhere
No you did not. Some of the sats on that list are not the same names as in
the
Amsat published list for tracking. I just used it and found the same.
--
Bill Booth VE3NXK
Sundridge ON, Canada
79.23.37 W x 45.46.18 N
FN05ns
Visit my weather WebCam at http://www.almaguin.com/wxcurrent/weather.html
Organ and Tissue Donation - The Gift of Life
Talk to your family. Your decision can make a difference.
------------------------------
Message: 10
Date: Sat, 6 Jun 2020 09:52:06 -0700
From: <wb7qxu@????.???>
To: amsat-bb@?????.???
Subject: [amsat-bb] PacsatGround Software
Message-ID: <AABRPZUSHA6SZ4NS@?????????.???.????.???>
Content-Type: text/plain; charset=us-ascii
Anyone use this software PacsatGround with a KANTRONICS KPC-9612+ if so
please contact
Mike wb7qxu@????.???. I am not able to get this software to talk to my
TNC.
____________________________________________________________
Sponsored by
https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_taglin
es_more
2 Buffalo Police Officers Are Charged With Assault
http://thirdpartyoffers.juno.com/TGL3141/5edbca0817f894a077452st04duc1
Zuckerberg: It's Time I Take a Fresh Look at Things
http://thirdpartyoffers.juno.com/TGL3141/5edbca08329454a077452st04duc2
Ivanka Trump Isn't Happy After Getting 'Cancelled'
http://thirdpartyoffers.juno.com/TGL3141/5edbca084dc634a077452st04duc3
------------------------------
Message: 11
Date: Sat, 6 Jun 2020 12:00:57 -0700
From: Kevin <wa7fwf@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] PacsatGround Software
Message-ID: <3bdf7815-665a-f31a-e440-fa10c953e3c9@?????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
Mike I tried replying privately but it bounced as "address couldn't be
found, or is unable to receive mail".
so here it is again
Hi Mike,
?I run a 9612+ with pacsatground try this...
Using putty or any other terminal program issue the following
port 2
cd ext/ext
fulldup off/on
mon off/on
maxusers 0/1
int kiss
reset
once you enter the reset you will now be in kiss mode and can no longer
issue commands
exit your terminal program
now startup pacsatground and you should be in business
make sure in pacsatground you turn off toggle out of kiss mode on exit
or you will have to go through these steps each time you start it
also I have noticed a bug where you exit pacsatground and the next time
you start it says it cannot open the com port
I'm thinking it leaves it in a odd state, to fix just go into windows
device mgr and disable and then enable the com port and it should now work.
Let me know if this does it for you.
73
Kevin WA7FWF
------------------------------
Message: 12
Date: Sat, 6 Jun 2020 12:45:01 -0700
From: <bernd1peters@?????.???>
To: <AMSAT-BB@?????.???>
Subject: Re: [amsat-bb] Antenna Location
Message-ID: <285501d63c3a$f7d290b0$e777b210$@?????.???>
Content-Type: text/plain; charset="us-ascii"
An indoors antenna would not work in my house. I took my Arrows antenna
inside and I basically hear nothing. Even just behind a modern double pane
window (I believe they have some polarization filters) you pretty much hear
nothing.
73,
Bernd - KB7AK
-----Original Message-----
From: AMSAT-BB <amsat-bb-bounces@?????.???> On Behalf Of Rich Gopstein via
AMSAT-BB
Sent: Saturday, June 6, 2020 7:55 AM
To: Floyd Rodgers <kc5qbc@??????.???>
Cc: AMSAT-BB@?????.???? satop <satop@??????????.???>
Subject: Re: [amsat-bb] Antenna Location
Yeah, I was wondering about that. I guess I could do a simple RF
attenuation test.
Rich
On Fri, Jun 5, 2020 at 9:27 PM Floyd Rodgers via AMSAT-BB <
amsat-bb@?????.???> wrote:
> Many newer houses have foil backed plywood decking to block heat transfer.
> That also blocks rf.
>
> Floyd KC5QBC
>
> > On Jun 5, 2020, at 7:02 PM, Burns Fisher via AMSAT-BB <
> amsat-bb@?????.???> wrote:
> >
> > Rich, the attic has always seemed like an attractive location to
> > me, but I'd suggest before you go that route, do some reception
> > checking. For example, see how well you receive one of the Foxes
> > on an HT on the
> ground
> > outside, and then go to the attic and see how similar it is.
> >
> > For reasons unknown, the last time I tried this I was totally unable
> > to
> get
> > ANYTHING in the attic, although I know some people have done well
there..
> > I wonder if it relates to the spacing of the nails compared to the
> > wavelength, or something about the particular mixture of material
> > used in the shingles?
> >
> > On Fri, Jun 5, 2020 at 4:44 PM Bob Hammond via AMSAT-BB <
> amsat-bb@?????.???>
> > wrote:
> >
> >> I use a fiberglass mast by MGS for my M2 LEO antennas and G5500
rotator.
> >> Works fine.
> >> You may not have enough room for the guy lines? I have expired HOA
> >> covenants, the best kind!
> >> Mine is up about 30-35 feet. PM me for details if you're interested.
> >>
> >> Bob W7OTJ
> >>
> >> On Fri, Jun 5, 2020 at 12:08 PM Rich Gopstein via AMSAT-BB <
> >> amsat-bb@?????.???> wrote:
> >>
> >>> Thanks. I've gotten a number of responses ranging from:
> >>> Put up a tower
> >>> Put it in the attic
> >>> Put it on a tripod on the roof
> >>> And - yours - put it somewhere reasonable and don't freak out
> >>> about the attenuation.
> >>>
> >>> The garage and the house both have 8/12 pitch roofs, so that's my
> concern
> >>> with mounting on the roof. I've done it before but I'm happy about
it.
> >>> The garage is lower, so less of a fall, but still steep.
> >>>
> >>> I might be able to get a small AZ/EL setup inside the attic above
> >>> the garage. The issue there is my shack is on the exact opposite
> >>> side of
> the
> >>> house. So, I'd most likely need to move the shack to the garage
attic.
> >>> There's power up there, but no insulation. Maybe I could put the
> IC-9700
> >>> there and remotely control it?
> >>>
> >>> I've thought about a tower... But there are so many tower options,
> it's a
> >>> little daunting. If I put the tower just outside where the shack
> >>> is,
> I'd
> >>> need about 38' to clear the highest peak of the house roof. I
> >>> could go lower and just live with a little extra attenuation from
> >>> the house
> roof.
> >>> And I assume any tower would come with the need to deal with the
> >>> local zoning/permit guys. If I go that route, I'd want the tower
> >>> to be high enough to use as the center of a dipole also.
> >>>
> >>> Too many options...
> >>>
> >>> Rich
> >>> KD2CQ
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>> On Fri, Jun 5, 2020 at 2:18 PM satop <satop@??????????.???> wrote:
> >>>>
> >>>> Rich, my last location was worse than yours I believe. I lived
> >>>> in an large city two story home with 9' ceilings and a large peak
> >>>> roof,
> think
> >>>> 1903 style. There was a three story home on the east side and a
> >>>> three story church on the west. Three very large oak trees in
> >>>> the front and
> >>> very
> >>>> poor aim points to the north. I mounted my tripod on a one story
> >>>> wood
> >>> shed
> >>>> on the north end of the home. I had about a 60' run of hardline
> >>>> to
> the
> >>>> shack and used high gain yagi antennas for vhf/uhf. This setup
> >>>> worked fantasy and always was amazing to me. I even pre
> >>>> purchased a
> Super-Amp
> >>>> SP-7000 for UHF but never found that I needed it. Use some
> >>>> antennas
> >> with
> >>>> some gain and I'll bet you'll be just fine mounting on the garage
> >>>> or
> >>> lower
> >>>> build.
> >>>>
> >>>> Gary/N8AYY
> >>>>
> >>>>
> >>>> Sent with ProtonMail <https://protonmail.com> Secure Email.
> >>>>
> >>>>
> >>> _______________________________________________
> >>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
> >>> available to all interested persons worldwide without requiring
membership.
> >> Opinions
> >>> expressed
> >>> are solely those of the author, and do not reflect the official
> >>> views
> of
> >>> AMSAT-NA.
> >>> Not an AMSAT-NA member? Join now to support the amateur satellite
> >> program!
> >>> Subscription settings:
> >>> https://www.amsat.org/mailman/listinfo/amsat-bb
> >>>
> >> _______________________________________________
> >> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
> >> available to all interested persons worldwide without requiring
membership.
> Opinions
> >> expressed
> >> are solely those of the author, and do not reflect the official
> >> views of AMSAT-NA.
> >> Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> >> Subscription settings:
> >> https://www.amsat.org/mailman/listinfo/amsat-bb
> >>
> > _______________________________________________
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
> > available to all interested persons worldwide without requiring
membership.
> Opinions expressed
> > are solely those of the author, and do not reflect the official
> > views of
> AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings:
> > https://www.amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership.
> Opinions expressed are solely those of the author, and do not reflect
> the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available to all
interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 13
Date: Sat, 6 Jun 2020 12:54:29 -0700
From: <bernd1peters@?????.???>
To: "'David Worboys'" <kg4zlb@??????.???>, <AMSAT-BB@?????.???>
Subject: Re: [amsat-bb] Doppler.SQF
Message-ID: <28a701d63c3c$4a4a83b0$dedf8b10$@?????.???>
Content-Type: text/plain; charset="us-ascii"
Give an example of which ones are not showing up, that might make it a
little easier to help you.
73,
Bernd - KB7AK
-----Original Message-----
From: AMSAT-BB <amsat-bb-bounces@?????.???> On Behalf Of David Worboys via
AMSAT-BB
Sent: Saturday, June 6, 2020 9:13 AM
To: Mineo Wakita <ei7m-wkt@?????????.??.??>
Cc: amsat-bb@?????.???
Subject: Re: [amsat-bb] Doppler.SQF
I copied the file and rebooted but some frequencies are still not showing in
the main window so maybe I missed a step somewhere - thank you for providing
the file though!
David
KG4ZLB
On Jun 6, 2020, at 11:59 AM, Mineo Wakita via AMSAT-BB <amsat-bb@?????.???>
wrote:
Please let me know if I make a miss_typo.
JE9PEL / Mineo Wakita
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available to all
interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available to all
interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 14
Date: Sat, 06 Jun 2020 11:33:33 -0600
From: Bob <bob@??????.???>
To: "Mark L. Hammond via AMSAT-BB" <amsat-bb@?????.???>
Subject: [amsat-bb] Doppler.sqf
Message-ID: <e0978697d04f06f8eaf50cc7de32bd68@??????.???>
Content-Type: text/plain; charset=UTF-8
If I have to manually update the doppler text files what is the purpose of
the Update Keps button in SatPC ?
Bob
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@?????.???.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 15, Issue 186
*****************************************
Read previous mail | Read next mail
| |
