| |
CX2SA > SATDIG 05.10.15 23:34l 867 Lines 29402 Bytes #999 (0) @ WW
BID : AMSATBB10291
Read: GUEST
Subj: AMSAT-BB-digest V10 291
Path: IW8PGT<IZ3LSV<IW0QNL<JH4XSY<JE7YGF<7M3TJZ<CX2SA
Sent: 151005/2128Z @:CX2SA.SAL.URY.SOAM #:28833 [Salto] FBB7.00e $:AMSATBB10291
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. new sats (Jerry Ehlers)
2. Fwd: Tuesday's webcast will set record straight about Dayton
Hamvention moving (wa4hfn@xxxxxxx.xxxx
3. NO-84 _ 14:45 utc 05-10-15 (KO6TZ Bob)
4. GomX-3 heard ! (Mineo Wakita)
5. RES: GomX-3 heard ! (PY5LF)
6. Re: Installing Sat Telem decoding such as FoxTelem.exe
(Chris Thompson)
7. RES: GomX-3 heard ! (PY5LF)
8. before upgrading from Windows 7 to Windows 10... (Shamai Opfer)
9. AAUSAT-5 (PY5LF)
10. Re: HDSDR SDRplay 817 issue (Erich Eichmann)
11. GomX-3 (Roland Zurmely)
12. Re: new sats (JoAnne Maenpaa)
13. Re: HDSDR SDRplay 817 issue (kb2m@xxxx.xxxx
----------------------------------------------------------------------
Message: 1
Date: Mon, 5 Oct 2015 08:48:44 -0500
From: Jerry Ehlers <w0sat2@xxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] new sats
Message-ID:
<CAKcwWq9U9tKOKEmoCD4=ivQ-4MfqsZHOgb-gFih_8ysDVu8fAg@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Hi: Where can an e-mail print out for the new FM and Linear birds.?? The
up and downlinks too.
Thanks Jerry w0sat
------------------------------
Message: 2
Date: Mon, 5 Oct 2015 15:03:40 +0000 (UTC)
From: wa4hfn@xxxxxxx.xxx
To: AMSAT <amsat-bb@xxxxx.xxx>
Cc: "gol, Grid" <starcom-bb@xxxxxxxx.xxx>
Subject: [amsat-bb] Fwd: Tuesday's webcast will set record straight
about Dayton Hamvention moving
Message-ID:
<2093533739.3600944.1444057420784.JavaMail.zimbra@xxxxxxx.xxx>
Content-Type: text/plain; charset=utf-8
----- Forwarded Message -----
From: "W5KUB.com" <video1.w5kub@xxxxx.xxx>
To: "Damon" <wa4hfn@xxxxxxx.xxx>
Sent: Monday, October 5, 2015 10:00:41 AM
Subject: Tuesday's webcast will set record straight about Dayton Hamvention
moving
** Amateur Radio Roundtable
------------------------------------------------------------
** Subject: Is Dayton Hamvention Moving?
------------------------------------------------------------
This week's W5KUB.com
(http://w5kub.us10.list-manage.com/track/click?u=0d5cdae05233f79e11025a75d&id=
8204c92016&e=3ac2e90269) show (October 6th) will have a special guest,
Michael Kalter, W8CI
(http://w5kub.us10.list-manage1.com/track/click?u=0d5cdae05233f79e11025a75d&id
=d6a4353f29&e=3ac2e90269) , Dayton Hamvention spokesperson, to set the
record straight about rumors of Hamvention moving to a new venue. Michael
will give us the official update regarding the recent rumors that have hit
the news outlets.
Additionally, Riley Hollingsworth, K4ZDH
(http://w5kub.us10.list-manage.com/track/click?u=0d5cdae05233f79e11025a75d&id=
1343255b53&e=3ac2e90269) , will be back with us. Riley is the former
Special Counsel to the FCC where he was in charge of the enforcement of our
spectrum. During Riley's segment, he will answer viewer questions that were
submitted regarding rules and regulations; and provide other information
regarding licensing and enforcement of our ham bands. Riley is a regular on
the show and will try to be with us every couple weeks.Send your questions
to AskRiley@xxxxx.xxx
(mailto:AskRiley@xxxxx.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
or you may submit questions via our chat room or telephone lines.
After last week's discussion on stealth antennas, we received several great
videos from viewers demonstrating how they implemented working antennas in
situations as we discussed. We will view those videos Tuesday night.
Next week (October 13) Paul Ewing, N6PSE
(http://w5kub.us10.list-manage2.com/track/click?u=0d5cdae05233f79e11025a75d&id
=d0a85743d0&e=3ac2e90269) , will be our guest. Paul has been the leader and
member of many dxpeditions. He will share pictures and discuss past
dxpeditions.
Riley Hollingsworth, Joe Eisenberg, and Emmett Hohensee have joined the show
and will provide lots of new and great items for discussion. They will
alternate appearances as their schedules permit.
Amateur Radio Roundtable is a live weekly amateur radio webcast, held every
Tuesday night at 8 PM CDT (0100 UTC Wednesday) at W5KUB.com
(http://w5kub.us10.list-manage.com/track/click?u=0d5cdae05233f79e11025a75d&id=
dd6cc6ab86&e=3ac2e90269) . The show covers a wide range of topics for ham
radio operators and electronic hobbyists; including balloon launches,
satellite, go-kits, emergency communications, SDR, digital modes, DXing,
home brewing, hamfest updates, and more. Viewers will have the opportunity
to ask questions via the chat room or telephone.
Towards the end of each show, we provide a link and viewers who have a
camera, microphone, and a Google+ account, can join the show. Your video and
audio will be on the webcast. This part of the show is very informal and up
to 10 people can join. We talk about anything the viewers want to discuss.
I also want to share pictures of your ham shack. Send a picture of your ham
shack with a description and we will feature your shack pictures on the
show. In fact, if you give permission, you could see your shack as the
background of that weeks webcast.
If you have a specific subject idea for a future show, send an email to
tom@xxxxx.xxx
(mailto:tom@xxxxx.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xx .
Forward this message to a Friend
(http://w5kub.us10.list-manage.com/track/click?u=0d5cdae05233f79e11025a75d&id=
fe96dba52f&e=3ac2e90269) will allow you to share this message with your
friends.
Join us for fun and interesting discussions!
Tom Medlin, W5KUB
(http://w5kub.us10.list-manage.com/track/click?u=0d5cdae05233f79e11025a75d&id=
53a207ad2a&e=3ac2e90269)
http://w5kub.us10.list-manage.com/track/click?u=0d5cdae05233f79e11025a75d&id=2
bf68f583d&e=3ac2e90269
Michael Kalter, W8CI
http://w5kub.us10.list-manage.com/track/click?u=0d5cdae05233f79e11025a75d&id=c
a41b42155&e=3ac2e90269
Riley Hollingsworth, K4ZDH
============================================================
** Facebook
(http://w5kub.us10.list-manage.com/track/click?u=0d5cdae05233f79e11025a75d&id=
42585e76f7&e=3ac2e90269)
** Facebook
(http://w5kub.us10.list-manage.com/track/click?u=0d5cdae05233f79e11025a75d&id=
dafdb233af&e=3ac2e90269)
** Twitter
(http://w5kub.us10.list-manage.com/track/click?u=0d5cdae05233f79e11025a75d&id=
375292bbf7&e=3ac2e90269)
** Twitter
(http://w5kub.us10.list-manage.com/track/click?u=0d5cdae05233f79e11025a75d&id=
afd921e19c&e=3ac2e90269)
** Website
(http://w5kub.us10.list-manage.com/track/click?u=0d5cdae05233f79e11025a75d&id=
e90ae58a73&e=3ac2e90269)
** Website
(http://w5kub.us10.list-manage.com/track/click?u=0d5cdae05233f79e11025a75d&id=
0fa162240f&e=3ac2e90269)
** Email (mailto:tom@xxxxx.xxxx
** Email (mailto:tom@xxxxx.xxxx
** YouTube
(http://w5kub.us10.list-manage1.com/track/click?u=0d5cdae05233f79e11025a75d&id
=462895128d&e=3ac2e90269)
** YouTube
(http://w5kub.us10.list-manage1.com/track/click?u=0d5cdae05233f79e11025a75d&id
=d8e3430599&e=3ac2e90269)
This email was sent to wa4hfn@xxxxxxx.xxx (mailto:wa4hfn@xxxxxxx.xxxx
why did I get this?
(http://w5kub.us10.list-manage.com/about?u=0d5cdae05233f79e11025a75d&id=fbfc40
555c&e=3ac2e90269&c=75cbf575b4) unsubscribe from this list
(http://w5kub.us10.list-manage1.com/unsubscribe?u=0d5cdae05233f79e11025a75d&id
=fbfc40555c&e=3ac2e90269&c=75cbf575b4) update subscription preferences
(http://w5kub.us10.list-manage.com/profile?u=0d5cdae05233f79e11025a75d&id=fbfc
40555c&e=3ac2e90269)
W5KUB.com Webcast . 3060 Country Place Dr E . Collierville, TN - Tennessee
38017 . USA
------------------------------
Message: 3
Date: Mon, 05 Oct 2015 08:15:34 -0700
From: KO6TZ Bob <my.callsign@xxxxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] NO-84 _ 14:45 utc 05-10-15
Message-ID: <56129416.8020703@xxxxxxx.xxx>
Content-Type: text/plain; CHARSET=US-ASCII; format=flowed
On the 14:45 utc pass of NO-84 I saw the FM transmitter turned on
continuously indicating someone was sending, but there was nothing on
the down link except the telemetry at 312 Hz. This went on for many
cycles of telemetry.
Was someone calling CQ or trying to answer my CQ?
If so, try moving your PSK31 signal lower in frequency, and don't forget
to update TLE's if you are using the DopplerPSK program.
KO6TZ Bob
------------------------------
Message: 4
Date: Tue, 6 Oct 2015 00:25:51 +0900
From: "Mineo Wakita" <ei7m-wkt@xxxxxxxxx.xx.xx>
To: <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] GomX-3 heard !
Message-ID: <6552FFBAA02644A4BDCCBEC6377216C6@xxxxxxxxxxxxxx>
Content-Type: text/plain; format=flowed; charset="iso-2022-jp";
reply-type=original
> Two Danish CubeSats carrying amateur radio payloads were successfully
deployed
> from the International Space Station (ISS) on Monday, October 5 at 14:05
UTC.
(C)AMSAT-UK
Downlink CW Mode
AAUSat-5 437.425 437.425 9600bps GMSK,CW
GomX-3 437.250 . 9600bps GMSK
I, JE9PEL heard now GomX-3 signal.
00:05-00:15 JST, 6 Oct 2015,
15:05-15:15 UTC, 5 Oct 2015
Ele 19 WN-N-E, 437.250MHz 9600bps GMSK CSP
http://www.ne.jp/asahi/hamradio/je9pel/51006gm3.png
http://www.ne.jp/asahi/hamradio/je9pel/aau5gom3.htm
JE9PEL, Mineo Wakita
------------------------------
Message: 5
Date: Mon, 5 Oct 2015 13:04:59 -0300
From: "PY5LF" <py5lf@xxxxxxxxxxxxx.xxx.xx>
To: "'Mineo Wakita'" <ei7m-wkt@xxxxxxxxx.xx.xx>, <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] RES: GomX-3 heard !
Message-ID: <007f01d0ff87$97d87e80$c7897b80$@xxxxxxxxxxxxx.xxx.xx>
Content-Type: text/plain; charset="us-ascii"
Hi Mineo
The GomX-3 was heard here too now 16:05UTC, strong signal in 437.250,00 .
73
PY5LF
Luciano Fabricio
Curitiba-PR-BR GG54jm
http://www.qrz.com/db/PY5LF
-----Mensagem original-----
De: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx Em nome de Mineo Wakita
Enviada em: segunda-feira, 5 de outubro de 2015 12:26
Para: amsat-bb@xxxxx.xxx
Assunto: [amsat-bb] GomX-3 heard !
> Two Danish CubeSats carrying amateur radio payloads were successfully
> deployed from the International Space Station (ISS) on Monday, October 5
at 14:05 UTC.
(C)AMSAT-UK
Downlink CW Mode
AAUSat-5 437.425 437.425 9600bps GMSK,CW
GomX-3 437.250 . 9600bps GMSK
I, JE9PEL heard now GomX-3 signal.
00:05-00:15 JST, 6 Oct 2015,
15:05-15:15 UTC, 5 Oct 2015
Ele 19 WN-N-E, 437.250MHz 9600bps GMSK CSP
http://www.ne.jp/asahi/hamradio/je9pel/51006gm3.png
http://www.ne.jp/asahi/hamradio/je9pel/aau5gom3.htm
JE9PEL, Mineo Wakita
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available to all
interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 6
Date: Mon, 5 Oct 2015 12:58:13 -0400
From: Chris Thompson <g0kla@xxxx.xxx>
To: Bob KD7YZ <kd7yz@xxxxxxxxxxx.xx>
Cc: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Installing Sat Telem decoding such as
FoxTelem.exe
Message-ID:
<CAJOf0+vNvYL-7E6d8WhigbZ27AYqGJo0qZ_GFiBoSUmbxw8MBQ@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Bob,
Sorry to hear you are having issues. Which version of Windows are you
running? This is tested on Windows 7, 8 and 10. No guarantees on versions
of Windows before that.
I don't recognize the error or the reference to VBrun. FoxTelem does not
use Visual Basic or the run time environment. It uses Java. Make sure
you have the latest version installed from java.com.
Chris
On Mon, Oct 5, 2015 at 9:27 AM, Bob KD7YZ <kd7yz@xxxxxxxxxxx.xx> wrote:
> Among others, today I installed FoxTelem.exe and XW2a.exe for decoding
> telemetry from recent launches.
>
> Both, when run, display a familiar Error-Burp about an "mschrt20.ocx"
> being missing or not registered.
>
> Per the install directions on the FoxTelem page, I followed the link to
> install VBrun. Having done that, I got the same error. I followed a link
> from that to the M/S Visual-Studio page and downloaded/installed that.
> Which, BTW, took 30 minutes.
>
> After sys re-start, STILL the same runtime error about missing OCX file.
>
> Search of ALL hard drives here and the OCX file is not at my place.
>
> Now what please?
>
>
> --
> 73,
> Bob KD7YZ
> www.qrz.com/db/kd7yz
> AmSat LM#901
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Chris E. Thompson
chrisethompson@xxxxx.xxx
g0kla@xxxx.xxx
------------------------------
Message: 7
Date: Mon, 5 Oct 2015 14:17:00 -0300
From: "PY5LF" <py5lf@xxxxxxxxxxxxx.xxx.xx>
To: "'Mineo Wakita'" <ei7m-wkt@xxxxxxxxx.xx.xx>, <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] RES: GomX-3 heard !
Message-ID: <008c01d0ff91$a6f72560$f4e57020$@xxxxxxxxxxxxx.xxx.xx>
Content-Type: text/plain; charset="us-ascii"
Hi
Signal heard form GomX-3 few minutes ago;
https://youtu.be/we24T9vVhbA
73
PY5LF
Luciano Fabricio
Curitiba-PR-BR GG54jm
http://www.qrz.com/db/PY5LF
-----Mensagem original-----
De: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx Em nome de Mineo Wakita
Enviada em: segunda-feira, 5 de outubro de 2015 12:26
Para: amsat-bb@xxxxx.xxx
Assunto: [amsat-bb] GomX-3 heard !
> Two Danish CubeSats carrying amateur radio payloads were successfully
> deployed from the International Space Station (ISS) on Monday, October 5
at 14:05 UTC.
(C)AMSAT-UK
Downlink CW Mode
AAUSat-5 437.425 437.425 9600bps GMSK,CW
GomX-3 437.250 . 9600bps GMSK
I, JE9PEL heard now GomX-3 signal.
00:05-00:15 JST, 6 Oct 2015,
15:05-15:15 UTC, 5 Oct 2015
Ele 19 WN-N-E, 437.250MHz 9600bps GMSK CSP
http://www.ne.jp/asahi/hamradio/je9pel/51006gm3.png
http://www.ne.jp/asahi/hamradio/je9pel/aau5gom3.htm
JE9PEL, Mineo Wakita
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available to all
interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 8
Date: Mon, 5 Oct 2015 20:37:55 +0300
From: Shamai Opfer <shamai.opfer@xxxxx.xxx>
To: AMSAT-BB@xxxxx.xxx
Subject: [amsat-bb] before upgrading from Windows 7 to Windows 10...
Message-ID:
<CAP-2a1phHbwobJqnBTsyzA87f22iJh5-XfFgkownCT22yqPqqg@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Hi all,
Many of us are using USB to RS232 adaptors, mainly for connecting the
station PC to transceivers CAT control, ROTOR controllers, and TNCs were
needed.
Although it seems that most, if not all, of the software programs work well
under Windows 10, and updated drivers can be downloaded for most of the
hardware, relatively old USB to RS232 adaptors might have chip sets that
are not supported anymore with drivers for above Windows 7 (i.e. Windows 8
and Windows 10).
There is a utility to check the chip set version provided by the vendor.
It is highly recommended to check before starting the upgrade :)
73, Shamai 4Z1WS
------------------------------
Message: 9
Date: Mon, 5 Oct 2015 14:42:05 -0300
From: "PY5LF" <py5lf@xxxxxxxxxxxxx.xxx.xx>
To: <AMSAT-BB@xxxxx.xxx>
Subject: [amsat-bb] AAUSAT-5
Message-ID: <000501d0ff95$2839f000$78add000$@xxxxxxxxxxxxx.xxx.xx>
Content-Type: text/plain; charset="us-ascii"
Nothing heard from AAUSAT-5 on this pass ...
GomX-3 strong signal.
73
PY5LF
Luciano Fabricio
Curitiba-PR-BR GG54jm
http://www.qrz.com/db/PY5LF
------------------------------
Message: 10
Date: Mon, 5 Oct 2015 20:02:46 +0200
From: Erich Eichmann <erich.eichmann@xxxxxxxx.xx>
To: kb2m@xxxx.xxxx AMSAT-BB@xxxxx.xxx
Subject: Re: [amsat-bb] HDSDR SDRplay 817 issue
Message-ID: <5612BB46.60309@xxxxxxxx.xx>
Content-Type: text/plain; charset=windows-1252; format=flowed
Jeff,
here Doppler correction and frequency tuning works flawlessly with FM
and SSB sats.
My setup:
SatPC32:
Radio 1 (FUNCube Dongle Pro +): TS-2000, COM 5, Baudrate 57600, CAT
delay 20
Radio 2: FT-817, COM 12 (USB-to-Serial), Baudrate 38400
HDSDR, menu Options:
CAT to HDSR (important, don't choose DDE to HDSDR ),
COM 6, Baudrate 57600
Item "activated" checked
COM 5 and 6 are linked virtual Ports, generated with VSP Mgr.
Frequency tuning of HDSDR and FT-817 by SatPC32 via the 5 controls or
the direction keys up/down and right/left works (SatPC32 must be the
active program - blue headerline)
Frequency via HDSRD works also, SatPC32 and the FT-817 follow.
You cannot QSY via the FT-817's VFO since it is the TX radio.
73s, Erich, DK1TB
Am 05.10.2015 um 13:21 schrieb kb2m@xxxx.xxxx
> After some OTA time what I'm finding out is that my setup here works only
> with FM sats. SO-50, CAS-3H, and NO-84(with the FM d/l). All of the linear
> birds do not work. What happens with the linear birds is when you first
> initialize them upon AOS the frequencies change correctly at the start of
> pass but after that there is no Doppler correction on the 817, or frequency
> manipulation with SatPC32's Cat tuning drop down box. With the FM birds all
> of this works correctly.
> If someone actually has this setup working with the linear birds I would
> like to see your exact configuration. Either I'm missing something not so
> obvious, or there is a s/w bug, possibly in HDSDR.
>
> My setup...
>
> FT-817ND
> SDRplay
> SatPC32 ver 12.8c
> HDSDR 2.70
>
>
> 73 Jeff kb2m
>
>
> -----Original Message-----
> From: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of Clayton
> W5PFG
> Sent: Sunday, October 04, 2015 16:31 PM
> To: amsat-bb@xxxxx.xxx
> Subject: Re: [amsat-bb] HDSDR SDRplay 817 issue
>
> Yes, I use VSP with HDSDR to full integrate with SatPC32 successfully.
>
> Make sure radio 2 is set to the proper radio type in SatPC32 for the FT-817.
> Use radio 1 for the CAT interface to HDSDR. It will appear as a Kenwood
> TS-2000. You will need to activate CAT in HDSDR for it to work.
>
> I have used this setup many times for a full automated SDR station on the
> satellites with a FUNcube Dongle Pro + and FT-857D.
>
> 73
> Clayton
> W5PFG
>
> On 10/4/2015 13:40, kb2m@xxxx.xxx wrote:
>> I'm trying to get HDSDR and SatPC32, to play nicely with HDRplay and
>> an FT-817. I have the HDSDR working with SDRplay like Patrick has
>> demonstrated on here and I'm trying to complete the setup for an fully
> automated system.
>> I'm trying to get the setup working to the point that if I change the
>> uplink frequency on the 817 with its physical dial the downlink on
>> HDSDR will follow. I'm about half way there. I'm at the point if I
>> change the downlink frequency in SatPC32 the HDSDR display changes
>> with it, but not the 817's uplink frequency. When I first load SatPC32
>> the 817's frequency changes to the correct uplink frequency but
>> doesn't update afterwards. I'm using VSP Manager to create the VSP's I
>> think I'm a little confused about how this should all hook together
> serially. Anyone have this working 100% ?
>>
>>
>> 73 Jeff kb2m
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 11
Date: Mon, 5 Oct 2015 18:02:52 +0000 (UTC)
From: Roland Zurmely <py4zbz@xxxxx.xxx>
To: AMSAT <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] GomX-3
Message-ID:
<1974995686.805351.1444068172534.JavaMail.yahoo@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Strong signal over Brasil, and NO signal from AAUSAT5...
<http://www.qsl.net/py4zbz/aausat5.htm>
73 de Roland PY4ZBZ
------------------------------
Message: 12
Date: Mon, 5 Oct 2015 14:29:22 -0500
From: "JoAnne Maenpaa" <k9jkm@xxxxxxx.xxx>
To: <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] new sats
Message-ID: <005a01d0ffa4$23c29ae0$6b47d0a0$@xxx>
Content-Type: text/plain; charset="us-ascii"
Hi Jerry,
> Where can an e-mail print out for the new FM and Linear birds.??
> The up and downlinks too.
Perhaps this list that was run in the AMSAT News Service bulletins may prove
useful (See below):
--
73 de JoAnne K9JKM
k9jkm@xxxxx.xxx
September 19 Multiple Amateur Radio Satellite Launch From China
Alan Kung, BA1DU, provided China AMSAT's (CAMSAT) frequency and mode
information for the September 19 launch of mulitple satellites on Beijing's
new Chang Zheng 6 (CZ-6) rocket from the Taiyuan Satellite Launch Center.
Estimated early Keplerian elements for a September 19 launch are:
XW-2(CAS-3)
1 99999U 15262.96885748 .00004985 00000-0 28395-3 0 00005
2 99999 097.4712 270.8252 0010383 266.0522 270.6644 15.12847565000015
Launch time was planned for 23:00:00 UTC on 2015-09-18 with deployment of
the satellites at 23:15:14 UTC. Technical difficulties postponed the launch
until 23:00:00 UTC on 2015-09-19.
The ARRL posted a Word Doc with frequency information from BA1DU at:
http://www.arrl.org/files/media/News/XW-2CAS-3%20Sats.doc
AMSAT-UK has a link to this document at:
http://amsat-uk.org/2015/09/16/camsat-xw-2-satellites-launch-info/
AMSAT has a link to the frequency document at:
http://www.amsat.org/?p=4512
The XW-2A through XW-2F satellites are using the same type of antenna. These
are quarter wavelength deployable monopole whip antennas and made of steel
tape, including a UHF uplink antenna and a VHF downlink antenna for each
satellite.
TX
Satellite Frequencies (MHz) Power Modulation
----------------------------- ------- -------------------
XW-2A (CAS-3A)
Digital Telemetry: 145.640 20 dBm 9.6/19.2kbps, GMSK
CW Beacon: 145.660 17 dBm 22wpm, CW
Inverting Linear Transponder
Uplink: 435.030 - 435.050
Downlink: 145.665 - 145.685 20 dBm
XW-2B (CAS-3B)
Digital Telemetry: 145.705 20 dBm 9.6/19.2kbps, GMSK
CW Beacon: 145.725 17 dBm 22wpm, CW
Inverting Linear Transponder
Uplink: 435.090 - 435.110
Downlink: 145.730 - 145.750 20 dBm
XW-2C (CAS-3C)
Digital Telemetry: 145.770 20 dBm 9.6/19.2kbps, GMSK
CW Beacon: 145.790 17 dBm 22wpm, CW
Inverting Linear Transponder
Uplink: 435.150 - 435.170
Downlink: 145.795 - 145.815 20 dBm
XW-2D (CAS-3D)
Digital Telemetry: 145.835 20 dBm 9.6/19.2kbps, GMSK
CW Beacon: 145.855 17 dBm 22wpm, CW
Inverting Linear Transponder
Uplink: 435.210 - 435.230
Downlink: 145.860 - 145.880 20 dBm
XW-2E (CAS-3E)
Digital Telemetry: 145.890 20 dBm 9.6kbps, GMSK
CW Beacon: 145.910 17 dBm 22wpm, CW
Inverting Linear Transponder
Uplink: 435.270 - 435.290
Downlink: 145.915 - 145.935 20 dBm
XW-2F (CAS-3F)
Digital Telemetry: 145.955 20 dBm 9.6kbps, GMSK
CW Beacon: 145.975 17 dBm 22wpm, CW
Inverting Linear Transponder
Uplink: 435.330 - 435.350
Downlink: 145.980 - 146.000 20 dBm
DCBB (CAS-3G)
Downlink: 145.475 Digital Telemetry 9.6kbps, GMSK
437.950 Digital Telemetry 9.6kbps, GMSK
LilacSat-2 (CAS-3H)
CW Beacon 437.225
APRS
Uplink: 144.390 AFSK
Downlink: 144.390 AFSK
FM Transponder
Uplink: 144.350 FM
Downlink: 437.200 FM
NUDT-Phone-Sat (CAS-3I)
Downlink: 437.300 Digital Telemetry 9.6kbps, FSK
[ANS thanks Alan Kung, BA1DU, and CAMSAT for the above information]
------------------------------
Message: 13
Date: Mon, 5 Oct 2015 17:26:26 -0400
From: <kb2m@xxxx.xxx>
To: "'Erich Eichmann'" <erich.eichmann@xxxxxxxx.xx>,
<AMSAT-BB@xxxxx.xxx>
Subject: Re: [amsat-bb] HDSDR SDRplay 817 issue
Message-ID: <07c601d0ffb4$8a6ed5a0$9f4c80e0$@xxx>
Content-Type: text/plain; charset="us-ascii"
Hi Erich, I hope all is well with you, all is good here. Thank you!
I knew it had to be something stupid I was missing. I was using the DDE to
HDSDR because it lists SatPC32 there, as there is no available doc
explaining all this, and it seemed to work with the FM birds it had me
stumped. I switched to CAT to HDSDR and all is acting like you said. Thanks
again.....
73 Jeff kb2m
-----Original Message-----
From: Erich Eichmann [mailto:erich.eichmann@xxxxxxxx.xxx
Sent: Monday, October 05, 2015 14:03 PM
To: kb2m@xxxx.xxxx AMSAT-BB@xxxxx.xxx
Subject: Re: [amsat-bb] HDSDR SDRplay 817 issue
Jeff,
here Doppler correction and frequency tuning works flawlessly with FM and
SSB sats.
My setup:
SatPC32:
Radio 1 (FUNCube Dongle Pro +): TS-2000, COM 5, Baudrate 57600, CAT delay
20 Radio 2: FT-817, COM 12 (USB-to-Serial), Baudrate 38400
HDSDR, menu Options:
CAT to HDSR (important, don't choose DDE to HDSDR ), COM 6, Baudrate 57600
Item "activated" checked
COM 5 and 6 are linked virtual Ports, generated with VSP Mgr.
Frequency tuning of HDSDR and FT-817 by SatPC32 via the 5 controls or the
direction keys up/down and right/left works (SatPC32 must be the active
program - blue headerline) Frequency via HDSRD works also, SatPC32 and the
FT-817 follow.
You cannot QSY via the FT-817's VFO since it is the TX radio.
73s, Erich, DK1TB
Am 05.10.2015 um 13:21 schrieb kb2m@xxxx.xxxx
> After some OTA time what I'm finding out is that my setup here works
> only with FM sats. SO-50, CAS-3H, and NO-84(with the FM d/l). All of
> the linear birds do not work. What happens with the linear birds is
> when you first initialize them upon AOS the frequencies change
> correctly at the start of pass but after that there is no Doppler
> correction on the 817, or frequency manipulation with SatPC32's Cat
> tuning drop down box. With the FM birds all of this works correctly.
> If someone actually has this setup working with the linear birds I
> would like to see your exact configuration. Either I'm missing
> something not so obvious, or there is a s/w bug, possibly in HDSDR.
>
> My setup...
>
> FT-817ND
> SDRplay
> SatPC32 ver 12.8c
> HDSDR 2.70
>
>
> 73 Jeff kb2m
>
>
> -----Original Message-----
> From: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of
> Clayton W5PFG
> Sent: Sunday, October 04, 2015 16:31 PM
> To: amsat-bb@xxxxx.xxx
> Subject: Re: [amsat-bb] HDSDR SDRplay 817 issue
>
> Yes, I use VSP with HDSDR to full integrate with SatPC32 successfully.
>
> Make sure radio 2 is set to the proper radio type in SatPC32 for the
FT-817.
> Use radio 1 for the CAT interface to HDSDR. It will appear as a
> Kenwood TS-2000. You will need to activate CAT in HDSDR for it to work.
>
> I have used this setup many times for a full automated SDR station on
> the satellites with a FUNcube Dongle Pro + and FT-857D.
>
> 73
> Clayton
> W5PFG
>
> On 10/4/2015 13:40, kb2m@xxxx.xxx wrote:
>> I'm trying to get HDSDR and SatPC32, to play nicely with HDRplay
>> and an FT-817. I have the HDSDR working with SDRplay like Patrick has
>> demonstrated on here and I'm trying to complete the setup for an
>> fully
> automated system.
>> I'm trying to get the setup working to the point that if I change the
>> uplink frequency on the 817 with its physical dial the downlink on
>> HDSDR will follow. I'm about half way there. I'm at the point if I
>> change the downlink frequency in SatPC32 the HDSDR display changes
>> with it, but not the 817's uplink frequency. When I first load
>> SatPC32 the 817's frequency changes to the correct uplink frequency
>> but doesn't update afterwards. I'm using VSP Manager to create the
>> VSP's I think I'm a little confused about how this should all hook
>> together
> serially. Anyone have this working 100% ?
>>
>>
>> 73 Jeff kb2m
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership.
> Opinions expressed are solely those of the author, and do not reflect the
official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@xxxxx.xxx.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 10, Issue 291
*****************************************
Read previous mail | Read next mail
| |
