| |
CX2SA > SATDIG 09.10.15 02:37l 693 Lines 21487 Bytes #999 (0) @ WW
BID : AMSATBB10299
Read: GUEST
Subj: AMSAT-BB-digest V10 299
Path: IW8PGT<IZ3LSV<IK6ZDE<I0OJJ<GB7CIP<XE1FH<ZL2BAU<CX2SA
Sent: 151009/0034Z @:CX2SA.SAL.URY.SOAM #:29106 [Salto] FBB7.00e $:AMSATBB10299
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. FoxTelem Tips (Chris Thompson)
2. Re: AO-85 telemetry now on www.amsat.org (Vince Fiscus, KB7ADL)
3. fox telem (Jim White)
4. Re: QRG for Telemetry on Fox-1A ? (Bob KD7YZ)
5. Re: QRG for Telemetry on Fox-1A ? (Paul Stoetzer)
6. Re: QRG for Telemetry on Fox-1A ? (Andrew Glasbrenner)
7. Re: fox telem (Chris Thompson)
8. Please do not send test packets to the server.
(Andrew Glasbrenner)
9. Re: LilacSat 2 transponder not on at 11:50Z 8 OCT 15 (Ted)
10. Re: AO-85 telemetry now on www.amsat.org (Jerry Buxton)
11. Colorado Amateur Satellite net Begins in 1 hour (Skyler F)
12. AO-85 in EM85tm (Philip Jenkins)
13. Guess I need Help with Fox-1A Software and IC910 (Bob KD7YZ)
14. Re: FoxTelem Tips (Mvivona)
15. Re: Guess I need Help with Fox-1A Software and IC910
(Andrew Glasbrenner)
16. AO-85 heard in EM97 (Zach Leffke)
17. Re: Guess I need Help with Fox-1A Software and IC910 (KO6TZ Bob)
----------------------------------------------------------------------
Message: 1
Date: Thu, 8 Oct 2015 18:08:41 -0400
From: Chris Thompson <g0kla@xxxx.xxx>
To: "AMSAT-BB@xxxxx.xxxx <AMSAT-BB@xxxxx.xxx>
Subject: [amsat-bb] FoxTelem Tips
Message-ID:
<CAJOf0+sV81LV6S6xakdc4CDVaf8QvtCYO-aXAvZRxg7sYN3GkA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
If you are attempting to decode Fox-1A in IQ mode with Find Signal enabled,
then it will also search for signals from Fox-1Cliff and Fox-1D. But that
is a waste of time at the moment :)
You can fix that by removing the files from the spacecraft directory. You
only need to move the files that end in .dat. In fact, renaming the ending
is sufficient. Leave the file for Fox-1A of course.
73
Chris
g0kla/ac2cz
--
Chris E. Thompson
chrisethompson@xxxxx.xxx
g0kla@xxxx.xxx
------------------------------
Message: 2
Date: Thu, 08 Oct 2015 17:23:19 -0600
From: "Vince Fiscus, KB7ADL" <vlfiscus@xxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] AO-85 telemetry now on www.amsat.org
Message-ID: <5.2.1.1.2.20151008172059.00c2c018@xxx.xxxxxxxxx.xxx>
Content-Type: text/plain; charset="us-ascii"; format=flowed
At 04:36 PM 10/8/2015 -0400, "Joe Fitzgerald" <jfitzgerald@xxxx.xxx.xxx>
wrote:
>Thanks to the tireless efforts of Douglas, KA2UPW/5, all submitted
>telemetry (raw and decoded) is now going up on the AMSAT website. Point
>your browser at
>
>http://www.amsat.org/tlm/ao85/
>
>
>-Joe KM1P
I saw the last frame uploaded has reset count 44. What
is being reset? Is it resetting on it's own?
KB7ADL
------------------------------
Message: 3
Date: Thu, 8 Oct 2015 16:47:09 -0600
From: Jim White <jim@xxxxxxxxxxxxxxxxx.xxx>
To: AMSAT-BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] fox telem
Message-ID: <5616F26D.2090603@xxxxxxxxxxxxxxxxx.xxx>
Content-Type: text/plain; charset=utf-8; format=flowed
Got it going.
You must use the drop down box to the right of the "Start" button to
select your input source, then click "Start". That box starts out empty
rather than showing the first input device in the list and there is no
text there to prompt the selection of the input.
It now finds and listens fine to sound card audio input and the FCD.
You DO NOT need to run the FDC control program, FoxTelem will set the
freq, although there doesn't appear to be any feedback to show the FDC
got the message.
Jim
------------------------------
Message: 4
Date: Thu, 8 Oct 2015 18:47:32 -0400
From: Bob KD7YZ <kd7yz@xxxxxxxxxxx.xx>
To: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] QRG for Telemetry on Fox-1A ?
Message-ID: <5616F284.8010406@xxxxxxxxxxx.xx>
Content-Type: text/plain; charset=windows-1252
On 08-Oct-15 1623, Paul Stoetzer wrote:
> Just a reminder - since the low data rate telemetry is subaudible, you
> will likely need to use the 9600 baud data out pin (and select the
> 9600 baud packet mode in the 817 menu) to get the unfiltered audio for
might that also apply to my IC910 ?? O am using the SignaLink USB sound Card
--
73,
Bob KD7YZ
www.qrz.com/db/kd7yz
AmSat LM#901
------------------------------
Message: 5
Date: Thu, 8 Oct 2015 18:49:04 -0400
From: Paul Stoetzer <n8hm@xxxx.xxx>
To: Bob KD7YZ <kd7yz@xxxxxxxxxxx.xx>
Cc: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] QRG for Telemetry on Fox-1A ?
Message-ID:
<CABzOSOo-H=r6ERBr3+7toe_0BWeqo=3_X0-zEMP31Mqqjeu7RA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Yes, the 910 also has the audio for 9600 baud packet on a separate pin.
73,
Paul, N8HM
On Thu, Oct 8, 2015 at 6:47 PM, Bob KD7YZ <kd7yz@xxxxxxxxxxx.xx> wrote:
> On 08-Oct-15 1623, Paul Stoetzer wrote:
>> Just a reminder - since the low data rate telemetry is subaudible, you
>> will likely need to use the 9600 baud data out pin (and select the
>> 9600 baud packet mode in the 817 menu) to get the unfiltered audio for
>
> might that also apply to my IC910 ?? O am using the SignaLink USB sound Card
>
> --
> 73,
> Bob KD7YZ
> www.qrz.com/db/kd7yz
> AmSat LM#901
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 6
Date: Thu, 8 Oct 2015 18:50:35 -0400
From: Andrew Glasbrenner <glasbrenner@xxxxxxxxxx.xxx>
To: Bob KD7YZ <kd7yz@xxxxxxxxxxx.xx>
Cc: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] QRG for Telemetry on Fox-1A ?
Message-ID: <30CCC010-60EC-4DC3-9F72-4997C638BA43@xxxxxxxxxx.xxx>
Content-Type: text/plain; charset=us-ascii
Yes. The speaker audio will filter out the subaudible tones. Data port does
not.
Sent from my iPhone
> On Oct 8, 2015, at 18:47, Bob KD7YZ <kd7yz@xxxxxxxxxxx.xx> wrote:
>
>> On 08-Oct-15 1623, Paul Stoetzer wrote:
>> Just a reminder - since the low data rate telemetry is subaudible, you
>> will likely need to use the 9600 baud data out pin (and select the
>> 9600 baud packet mode in the 817 menu) to get the unfiltered audio for
>
> might that also apply to my IC910 ?? O am using the SignaLink USB sound Card
>
> --
> 73,
> Bob KD7YZ
> www.qrz.com/db/kd7yz
> AmSat LM#901
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 7
Date: Thu, 8 Oct 2015 18:52:49 -0400
From: Chris Thompson <g0kla@xxxx.xxx>
To: Jim White <jim@xxxxxxxxxxxxxxxxx.xxx>
Cc: AMSAT-BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] fox telem
Message-ID:
<CAJOf0+u+w8iDJt_01FZisUKZFUy9U3cXE_fxrzOuZ+HHmP4+ZA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Jim, I agree that is not obvious. Thanks for the feedback.
73
Chris
On Thu, Oct 8, 2015 at 6:47 PM, Jim White <jim@xxxxxxxxxxxxxxxxx.xxx> wrote:
> Got it going.
> You must use the drop down box to the right of the "Start" button to
> select your input source, then click "Start". That box starts out empty
> rather than showing the first input device in the list and there is no text
> there to prompt the selection of the input.
> It now finds and listens fine to sound card audio input and the FCD.
> You DO NOT need to run the FDC control program, FoxTelem will set the
> freq, although there doesn't appear to be any feedback to show the FDC got
> the message.
>
> Jim
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Chris E. Thompson
chrisethompson@xxxxx.xxx
g0kla@xxxx.xxx
------------------------------
Message: 8
Date: Thu, 8 Oct 2015 18:59:28 -0400
From: "Andrew Glasbrenner" <glasbrenner@xxxxxxxxxx.xxx>
To: "'AMSAT-BB'" <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Please do not send test packets to the server.
Message-ID: <083801d1021c$fc907340$f5b159c0$@xxx>
Content-Type: text/plain; charset="us-ascii"
It confuses the electrons. Thank you.
73, Drew KO4MA
------------------------------
Message: 9
Date: Thu, 8 Oct 2015 16:06:01 -0700
From: "Ted" <k7trkradio@xxxxxxx.xxx>
To: "'B J'" <va6bmj@xxxxx.xxx>, "'Rick Walter'" <wb3csy@xxxxx.xxx>
Cc: 'AMSAT-BB' <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] LilacSat 2 transponder not on at 11:50Z 8 OCT
15
Message-ID: <003601d1021d$e73a7490$b5af5db0$@xxxxxxx.xxx>
Content-Type: text/plain; charset="us-ascii"
Posts here and on amsat uk indicated transponder is only active Mon, Wed and
Fridays
73, TK
-----Original Message-----
From: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of B J
Sent: Thursday, October 08, 2015 6:19 AM
To: Rick Walter
Cc: AMSAT-BB
Subject: Re: [amsat-bb] LilacSat 2 transponder not on at 11:50Z 8 OCT 15
On 10/8/15, Rick Walter <wb3csy@xxxxx.xxx> wrote:
> Went out with my arrow antenna for the 11:50Z pass of LilacSat 2 and heard
> the carrier with tone every 30 seconds but the FM transponder was not
turned
> on.
<snip>
I heard no downlink during the pass here in DO33 which started just
before 0200 UTC. There's another pass coming up in less than 2 hours
from now and I might try that, weather permitting.
73s
Bernhard VA6BMJ @ DO33FL
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 10
Date: Thu, 8 Oct 2015 18:16:50 -0500
From: Jerry Buxton <n0jy@xxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] AO-85 telemetry now on www.amsat.org
Message-ID: <5616F962.3020903@xxxxx.xxx>
Content-Type: text/plain; charset=windows-1252; format=flowed
Reset Count 44 is from the test telemetry we sent out with Fox-1A. It
seems that many are running the test wav files now and we don't have the
server yet up to speed on not showing those in the results. If you can
test but turn off the settings UPLOAD TO SERVER while you test, that
will help keep the web page to only "live" reports.
Thanks
Jerry
N0JY
On 10/8/2015 18:23, Vince Fiscus, KB7ADL wrote:
> At 04:36 PM 10/8/2015 -0400, "Joe Fitzgerald"
> <jfitzgerald@xxxx.xxx.xxx> wrote:
>> Thanks to the tireless efforts of Douglas, KA2UPW/5, all submitted
>> telemetry (raw and decoded) is now going up on the AMSAT website. Point
>> your browser at
>>
>> http://www.amsat.org/tlm/ao85/
>>
>>
>> -Joe KM1P
>
>
>
> I saw the last frame uploaded has reset count 44. What
> is being reset? Is it resetting on it's own?
>
> KB7ADL
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership.
> Opinions expressed
> are solely those of the author, and do not reflect the official views
> of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
>
------------------------------
Message: 11
Date: Thu, 8 Oct 2015 17:03:43 -0700
From: Skyler F <electricity440@xxxxx.xxx>
To: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Colorado Amateur Satellite net Begins in 1 hour
Message-ID:
<CAJNyT08fcjPQ=cq8ZP1FhoLUzsC0WrHVAwVASxO0CV5Bw3p8Ew@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
This is a reminder that the Colorado Amateur Satellite net will begin in 1
hour from now (7PM mountain time Thursday).
6PM Pacific
7PM Mountain
8PM Central
9PM Eastern
Please visit us on
*AMSATNET.INFO <http://amsatnet.info/>*
*IRLP*
9870, the Denver Reflector
*ALLSTAR LINK*
40764, direct hookup to the repeater here. 41715, KC9ZHV hub at a data
center if I am out of bandwidth. More info on AllStar - amsatnet.info/#node
*ECHOLINK*
*AMSAT* unless there is an ARISS contact, then go direct to KD0WHB-L
*LOCAL RF*
449.875 (-) 103.5 (the Rocky Mountain Radio League repeater on Eldorado
Mountain)
447.225 (-) 141.3 (The STEM school repeater we set up)
447.850 (-) 141.3 (AC?KQ's repeater where he lives on TOP of saddleback
mountain)
449.625 (-) 141.3 ( W?KU Lookout Mountain) Possibly here, not for sure yet
147.450 SIMPLEX (Aurora, CO)
446.275 (-) 100.0 Galena St. Local repeater at my house, giving a whoppin 5
blocks of great coverage
*REMOTE RF*
Your Repeater here!, Email me if you want to link in or me to link your
echolink or allstar repeater in automatically (no automatic IRLP linking
supported)
Skyler Fennell
amsatnet.info
KD?WHB
electricity440@xxxxx.xxx
------------------------------
Message: 12
Date: Thu, 8 Oct 2015 20:05:16 -0400
From: Philip Jenkins <n4hf.philip@xxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] AO-85 in EM85tm
Message-ID:
<CAGdEbNY-sCZJB0hFERFrkJSHimo4dL5-3w1Gmpj66YwuUcQNdA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
20 degree pass here...but WOW, was it loud!
It was so loud on the HT with Arrow antenna that I turned on the mobile rig
in the truck and heard it ID very well twice with just a dual-band mobile
Comet antenna
Very well done!
Philip N4HF
------------------------------
Message: 13
Date: Thu, 8 Oct 2015 20:07:46 -0400
From: Bob KD7YZ <kd7yz@xxxxxxxxxxx.xx>
To: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Guess I need Help with Fox-1A Software and IC910
Message-ID: <56170552.9050300@xxxxxxxxxxx.xx>
Content-Type: text/plain; charset=utf-8
Disappointing. I normally decode ARISS as well as local APRS.
I heard the Voice ID gal very strongly, numerous times.
The program was set to get audio from the SignaLink USB just as MixW and
UISS are. Though they were no loaded.
On the IC910, I set "9600" on then after a while OFF then switched it
back again later.
Got no decodes nor heard anything in the form of a signal except the
Fox1 Safe Mode gal.
Can I get some guidance before nest pass?
thanks
--
73,
Bob KD7YZ
www.qrz.com/db/kd7yz
AmSat LM#901
------------------------------
Message: 14
Date: Thu, 8 Oct 2015 20:09:57 -0400
From: Mvivona <Mvivona@xxxxx.xxx>
To: Chris Thompson <g0kla@xxxx.xxx>
Cc: "AMSAT-BB@xxxxx.xxxx <AMSAT-BB@xxxxx.xxx>
Subject: Re: [amsat-bb] FoxTelem Tips
Message-ID: <59AA8CE5-8C5F-46F0-AF05-A9A77FFA1344@xxxxx.xxx>
Content-Type: text/plain; charset=us-ascii
I had a 30deg pass just now an using an arrow and Funcube dongle. I could
see the spike on the telemetry program. On my handheld with a rubber duck I
could hear the girl say Fox-1 every couple of minutes, but the program would
not move its tracking line to the carrier. The last one that came across I
moved it with the mouse and it then locked in and I just caught the ending
audio come over the speaker.
I haven't deleted the extra dat files, so I didn't have it in find mode.
Should it be?
Michael-KC4ZVA
Sent from my iPad
On Oct 8, 2015, at 6:08 PM, Chris Thompson <g0kla@xxxx.xxx> wrote:
If you are attempting to decode Fox-1A in IQ mode with Find Signal enabled,
then it will also search for signals from Fox-1Cliff and Fox-1D. But that
is a waste of time at the moment :)
You can fix that by removing the files from the spacecraft directory. You
only need to move the files that end in .dat. In fact, renaming the ending
is sufficient. Leave the file for Fox-1A of course.
73
Chris
g0kla/ac2cz
--
Chris E. Thompson
chrisethompson@xxxxx.xxx
g0kla@xxxx.xxx
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 15
Date: Thu, 8 Oct 2015 20:13:08 -0400
From: "Andrew Glasbrenner" <glasbrenner@xxxxxxxxxx.xxx>
To: "'Bob KD7YZ'" <kd7yz@xxxxxxxxxxx.xx>, "'AMSAT BB'"
<amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Guess I need Help with Fox-1A Software and
IC910
Message-ID: <086c01d10227$47430650$d5c912f0$@xxx>
Content-Type: text/plain; charset="us-ascii"
You can't use regular audio, because it has the low frequencies we are using
for the data filtered out. That includes the sound through your Signalink.
Use must either use an SDR source, or the audio from the data out pin on the
back of your radio. Section 4.3 in the manual.
73, Drew KO4MA
-----Original Message-----
From: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of Bob KD7YZ
Sent: Thursday, October 08, 2015 8:08 PM
To: AMSAT BB
Subject: [amsat-bb] Guess I need Help with Fox-1A Software and IC910
Disappointing. I normally decode ARISS as well as local APRS.
I heard the Voice ID gal very strongly, numerous times.
The program was set to get audio from the SignaLink USB just as MixW and
UISS are. Though they were no loaded.
On the IC910, I set "9600" on then after a while OFF then switched it back
again later.
Got no decodes nor heard anything in the form of a signal except the
Fox1 Safe Mode gal.
Can I get some guidance before nest pass?
thanks
--
73,
Bob KD7YZ
www.qrz.com/db/kd7yz
AmSat LM#901
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available to all
interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 16
Date: Thu, 8 Oct 2015 20:14:41 -0400
From: Zach Leffke <zleffke@xx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] AO-85 heard in EM97
Message-ID: <561706F1.6010900@xx.xxx>
Content-Type: text/plain; charset=utf-8; format=flowed
STRONG signal in EM97 at the VTGS. Managed to decode 5 frames.
Saw a little bit of weirdness in doppler shift. BUT.......that might
have been my gnuradio flowgraph mis-tuning (might need to check my
plus/minus signs in the next 1.5 hours for the next pass).
Other than looked good. Super pumped here, had two undergraduate
students with me helping out (John KK4BSM, Harry KM4ICI).
Thanks to those for the advice on piping sound into FoxTelem from GNU Radio.
-Zach, KJ4QLP
------------------------------
Message: 17
Date: Thu, 08 Oct 2015 17:33:06 -0700
From: KO6TZ Bob <my.callsign@xxxxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] Guess I need Help with Fox-1A Software and
IC910
Message-ID: <56170B42.60006@xxxxxxx.xxx>
Content-Type: text/plain; CHARSET=US-ASCII; format=flowed
Bob,
I have used sound card data at 9k6 with my IC910 for many years. I have
found that using an interface with isolation transformers, works poorly.
Try wiring directly from the 9k6 pin of the sub band on the IC910 to the
line-in of your desktop computer. I say desktop because many / most
laptops have a microphone input only. That will probably not work.
Secondly, the 9600 setting on the radio is a transmit setting, not
receive. If you want to try using the SignaLink to see if it will work,
move the strap inside the SignaLink to the 9k6 pin of the radio.
I have a low pass here in the west at 01:30u and a good one at 03:00u.
I will see what kind of success comes my way.
BOB KO6TZ
Disappointing. I normally decode ARISS as well as local APRS. I heard
the Voice ID gal very strongly, numerous times. The program was set to
get audio from the SignaLink USB just as MixW and UISS are. Though they
were no loaded. On the IC910, I set "9600" on then after a while OFF
then switched it back again later. Got no decodes nor heard anything in
the form of a signal except the Fox1 Safe Mode gal. Can I get some
guidance before nest pass? thanks -- 73,
Bob KD7YZ www.qrz.com/db/kd7yz AmSat LM#901
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@xxxxx.xxx.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 10, Issue 299
*****************************************
Read previous mail | Read next mail
| |
