| |
CX2SA > SATDIG 09.10.15 06:24l 789 Lines 25431 Bytes #999 (0) @ WW
BID : AMSATBB10300
Read: GUEST
Subj: AMSAT-BB-digest V10 300
Path: IW8PGT<CX2SA
Sent: 151009/0416Z @:CX2SA.SAL.URY.SOAM #:29111 [Salto] FBB7.00e $:AMSATBB10300
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Re: LilacSat 2 transponder not on at 11:50Z 8 OCT 15 (Rick Walter)
2. Re: Installing Sat Telem decoding such as FoxTelem.exe
(Steve Kristoff)
3. Re: Colorado Amateur Satellite net Begins in 1 hour (Skyler F)
4. Re: FoxTelem Tips (Chris Thompson)
5. Used the FCDP+ but no decodes. (Bob KD7YZ)
6. FoxTelem and Java (David Rush)
7. Re: FoxTelem Tips (Mvivona)
8. Fox-1A is in Transponder Mode (Jerry Buxton)
9. Fox-1A Telemetry Today (Nicholas Mahr KE8AKW)
10. Fox-1A Heard in Los Angeles (Bryce Salmi)
11. First impressions of Fox-1A/AO-85/Grace2 (Tom Schuessler)
12. Fox-1A, Grace, or AO-85 (Loon -)
13. Re: Fox-1A is in Transponder Mode (Peter Goodhall)
14. Does AMSAT want AO-85 decoded frames after the fact? (Zach Leffke)
15. Re: Fox-1A is in Transponder Mode (Jerry Buxton)
16. Re: Installing Sat Telem decoding such as FoxTelem.exe
(Mike Rupprecht)
----------------------------------------------------------------------
Message: 1
Date: Thu, 8 Oct 2015 20:58:46 -0400
From: Rick Walter <wb3csy@xxxxx.xxx>
To: Ted <k7trkradio@xxxxxxx.xxx>
Cc: AMSAT-BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] LilacSat 2 transponder not on at 11:50Z 8 OCT
15
Message-ID: <0DC1F3D1-8CEF-4141-8DE2-A910B53AC19D@xxxxx.xxx>
Content-Type: text/plain; charset=us-ascii
In the early days it was on for 24 hours after the Mon, Wed, and Fri turn
on. I worked it in the morning after the "turn on". I need to look at my log
but I am fairly sure that did happen.
Rick
Sent from Rick's iPhone 6S
"Great spirits have always encountered violent opposition from mediocre
minds" - Albert Einstein
> On Oct 8, 2015, at 7:06 PM, Ted <k7trkradio@xxxxxxx.xxx> wrote:
>
> Posts here and on amsat uk indicated transponder is only active Mon, Wed and
> Fridays
>
> 73, TK
>
> -----Original Message-----
> From: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of B J
> Sent: Thursday, October 08, 2015 6:19 AM
> To: Rick Walter
> Cc: AMSAT-BB
> Subject: Re: [amsat-bb] LilacSat 2 transponder not on at 11:50Z 8 OCT 15
>
>> On 10/8/15, Rick Walter <wb3csy@xxxxx.xxx> wrote:
>> Went out with my arrow antenna for the 11:50Z pass of LilacSat 2 and heard
>> the carrier with tone every 30 seconds but the FM transponder was not
> turned
>> on.
>
> <snip>
>
> I heard no downlink during the pass here in DO33 which started just
> before 0200 UTC. There's another pass coming up in less than 2 hours
> from now and I might try that, weather permitting.
>
> 73s
>
> Bernhard VA6BMJ @ DO33FL
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 2
Date: Thu, 8 Oct 2015 21:02:00 -0400
From: "Steve Kristoff" <skristof@xxxxxxx.xxx>
To: "AMSAT BB" <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Installing Sat Telem decoding such as
FoxTelem.exe
Message-ID: <BA8E7C44959A4FECBCD84B758C06C32E@xxxxxxx>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
Well, tried downloading Visual Basic Runtime, got about a dozen zip files,
tried to unzip them, don't know where to put them, etc.
Is there another XW-2C telemetry decoder that doesn't require MSCHRT20.ocx,
whatever that is?
Steve AI9IN
----- Original Message -----
From: "Peter Goodhall" <peter@xxxxx.xxx>
To: "Steve Kristoff" <skristof@xxxxxxx.xxx>
Cc: "AMSAT BB" <amsat-bb@xxxxx.xxx>
Sent: Thursday, October 08, 2015 9:23 AM
Subject: Re: [amsat-bb] Installing Sat Telem decoding such as FoxTelem.exe
> Steve,
>
> Not sure what dev tools the decoder is made from however I believe
> MSCHRT20 is a part of the Visual Basic Runtime so you can grab that
> from https://support.microsoft.com/en-us/vbruntime
>
> Pete, 2E0SQL
>
> On 8 October 2015 at 01:41, Steve Kristoff <skristof@xxxxxxx.xxx> wrote:
>> I'm having the same issue with the MSCHRT20.ocx file missing or invalid
>> or
>> whatever.
>> Can someone please point me to the fix or to another XW-2 telemetry
>> decoder?
>> Thank you.
>>
>> Steve AI9IN
>>
> _______________________________________________
>
------------------------------
Message: 3
Date: Thu, 8 Oct 2015 19:11:25 -0600
From: Skyler F <electricity440@xxxxx.xxx>
To: kk5do@xxxxx.xxxx "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Colorado Amateur Satellite net Begins in 1
hour
Message-ID:
<CAJNyT0_sWnzp7321MSTLLeFZqMDg6SmPm08YCDoVv8p68BPGuw@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
The net IS still going on!
The net has CHANGED local repeaters, but is on the same link systems.
All info is amsatnet.info home page.
On Thu, Oct 8, 2015 at 6:52 PM, <kk5do@xxxxx.xxx> wrote:
> i got a message to remove the net from the amsat net lists stating you had
> stopped doing the net. is it still going on?
>
> 73...bruce
>
> Sent from my iPhone
>
> On Oct 8, 2015, 7:03:59 PM, Skyler F wrote:
> This is a reminder that the Colorado Amateur Satellite net will begin in 1
> hour from now (7PM mountain time Thursday).
>
> 6PM Pacific
> 7PM Mountain
> 8PM Central
> 9PM Eastern
>
>
> Please visit us on
>
> *AMSATNET.INFO <http://amsatnet.info/>*
>
> *IRLP*
> 9870, the Denver Reflector
>
> *ALLSTAR LINK*
>
> 40764, direct hookup to the repeater here. 41715, KC9ZHV hub at a data
> center if I am out of bandwidth. More info on AllStar -
> amsatnet.info/#node
>
> *ECHOLINK*
>
> *AMSAT* unless there is an ARISS contact, then go direct to KD0WHB-L
>
> *LOCAL RF*
> 449.875 (-) 103.5 (the Rocky Mountain Radio League repeater on Eldorado
> Mountain)
> 447.225 (-) 141.3 (The STEM school repeater we set up)
> 447.850 (-) 141.3 (AC?KQ's repeater where he lives on TOP of saddleback
> mountain)
> 449.625 (-) 141.3 ( W?KU Lookout Mountain) Possibly here, not for sure yet
> 147.450 SIMPLEX (Aurora, CO)
> 446.275 (-) 100.0 Galena St. Local repeater at my house, giving a whoppin 5
> blocks of great coverage
>
> *REMOTE RF*
>
> Your Repeater here!, Email me if you want to link in or me to link your
> echolink or allstar repeater in automatically (no automatic IRLP linking
> supported)
>
>
>
> Skyler Fennell
> amsatnet.info
> KD?WHB
> electricity440@xxxxx.xxx
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
>
--
Skyler Fennell
amsatnet.info
KD?WHB
electricity440@xxxxx.xxx
------------------------------
Message: 4
Date: Thu, 8 Oct 2015 21:25:17 -0400
From: Chris Thompson <g0kla@xxxx.xxx>
To: Mvivona <Mvivona@xxxxx.xxx>
Cc: "AMSAT-BB@xxxxx.xxxx <AMSAT-BB@xxxxx.xxx>
Subject: Re: [amsat-bb] FoxTelem Tips
Message-ID:
<CAJOf0+vS7fpt5X63tMdOE1m3ozxxf1OKCPdOjLSeJJ4T=kzyTA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Great question Michael. Don't know. Find Signal is experimental. Try it
and report back.
On Thu, Oct 8, 2015 at 8:09 PM, Mvivona <Mvivona@xxxxx.xxx> wrote:
> I had a 30deg pass just now an using an arrow and Funcube dongle. I could
> see the spike on the telemetry program. On my handheld with a rubber duck I
> could hear the girl say Fox-1 every couple of minutes, but the program
> would not move its tracking line to the carrier. The last one that came
> across I moved it with the mouse and it then locked in and I just caught
> the ending audio come over the speaker.
> I haven't deleted the extra dat files, so I didn't have it in find mode.
> Should it be?
>
> Michael-KC4ZVA
> Sent from my iPad
>
> On Oct 8, 2015, at 6:08 PM, Chris Thompson <g0kla@xxxx.xxx> wrote:
>
> If you are attempting to decode Fox-1A in IQ mode with Find Signal enabled,
> then it will also search for signals from Fox-1Cliff and Fox-1D. But that
> is a waste of time at the moment :)
>
> You can fix that by removing the files from the spacecraft directory. You
> only need to move the files that end in .dat. In fact, renaming the ending
> is sufficient. Leave the file for Fox-1A of course.
>
> 73
> Chris
> g0kla/ac2cz
>
> --
> Chris E. Thompson
> chrisethompson@xxxxx.xxx
> g0kla@xxxx.xxx
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Chris E. Thompson
chrisethompson@xxxxx.xxx
g0kla@xxxx.xxx
------------------------------
Message: 5
Date: Thu, 8 Oct 2015 21:50:41 -0400
From: Bob KD7YZ <kd7yz@xxxxxxxxxxx.xx>
To: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Used the FCDP+ but no decodes.
Message-ID: <56171D71.3070304@xxxxxxxxxxx.xx>
Content-Type: text/plain; charset=utf-8
I saw the "Eye" mentioned in the manual a few times. but the entire
pass, to elevation about 50 degrees, never once decoded anything.
I selected the FCDP+ from the pull-down. That defaulted to 192K.
on the graph was "sample rate = 48000 samples 70"
I'm guessing there were no other things to set on the front page.
One more chance in an hour if I can get help on the FCDP+ as I gave up
on modifying my IC910 SignaLink cables.
--
73,
Bob KD7YZ
www.qrz.com/db/kd7yz
AmSat LM#901
------------------------------
Message: 6
Date: Thu, 8 Oct 2015 19:50:45 -0600
From: David Rush <david@xxxxxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] FoxTelem and Java
Message-ID: <56171D75.9020205@xxxxxxxx.xxx>
Content-Type: text/plain; charset=utf-8; format=flowed
I've got two Win7 (64 bit) computers here that already had Java 8
installed, but on both when I tried to run FoxTelem.exe it said that I
didn't have Java and offered a link where I could download it.
However, double-clicking on FoxTelem.jar seems to work just fine.
Just thought I'd share that in case someone else runs into it.
Just went out to the driveway (EM72) to listen to Fox-1A fly over on a
hand-pointed Arrow antenna. Great to hear it on-orbit. Didn't find any
decoded telemetry on the "inside" computer (using an omni) when I came
back in.
73, David, ky7dr
------------------------------
Message: 7
Date: Thu, 8 Oct 2015 22:09:23 -0400
From: Mvivona <Mvivona@xxxxx.xxx>
To: Chris Thompson <g0kla@xxxx.xxx>
Cc: "AMSAT-BB@xxxxx.xxxx <AMSAT-BB@xxxxx.xxx>
Subject: Re: [amsat-bb] FoxTelem Tips
Message-ID: <D894C724-EDBA-4F48-A865-8E64493DF20D@xxxxx.xxx>
Content-Type: text/plain; charset=us-ascii
Using Funcube+ on the FoxTelem program. Saw spike during Fox-1 transmission,
moved the cursor by hand to the carrier spike. The eye and the window next
to it sprang to life, but never decoded anything.
If I disable the audio filter and unsquelch the program, key up my HT into a
dummy load on 145.98 it sounds like a steady buzz even when I'm talking.
Shouldn't I be able to hear myself over the telemetry program?
I thought there was one moment I could hear the girl saying Fox one on the
telemetry program, should I be able to hear her audio?
Michael Vivona
Sent from my iPad
On Oct 8, 2015, at 9:25 PM, Chris Thompson <g0kla@xxxx.xxx> wrote:
Great question Michael. Don't know. Find Signal is experimental. Try it
and report back.
> On Thu, Oct 8, 2015 at 8:09 PM, Mvivona <Mvivona@xxxxx.xxx> wrote:
> I had a 30deg pass just now an using an arrow and Funcube dongle. I could
see the spike on the telemetry program. On my handheld with a rubber duck I
could hear the girl say Fox-1 every couple of minutes, but the program would
not move its tracking line to the carrier. The last one that came across I
moved it with the mouse and it then locked in and I just caught the ending
audio come over the speaker.
> I haven't deleted the extra dat files, so I didn't have it in find mode.
> Should it be?
>
> Michael-KC4ZVA
> Sent from my iPad
>
> On Oct 8, 2015, at 6:08 PM, Chris Thompson <g0kla@xxxx.xxx> wrote:
>
> If you are attempting to decode Fox-1A in IQ mode with Find Signal enabled,
> then it will also search for signals from Fox-1Cliff and Fox-1D. But that
> is a waste of time at the moment :)
>
> You can fix that by removing the files from the spacecraft directory. You
> only need to move the files that end in .dat. In fact, renaming the ending
> is sufficient. Leave the file for Fox-1A of course.
>
> 73
> Chris
> g0kla/ac2cz
>
> --
> Chris E. Thompson
> chrisethompson@xxxxx.xxx
> g0kla@xxxx.xxx
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
--
Chris E. Thompson
chrisethompson@xxxxx.xxx
g0kla@xxxx.xxx
------------------------------
Message: 8
Date: Thu, 08 Oct 2015 20:14:49 -0700
From: Jerry Buxton <amsat@xxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Fox-1A is in Transponder Mode
Message-ID: <20151009031625.D40A3811A@xxxxxxxxxx.xxxxx.xxx>
Content-Type: text/plain; charset=utf-8
Fox-1A will be in Transponder Mode until about 10:00 UTC October 8, 2015.
Jerry
N0JY
------------------------------
Message: 9
Date: Thu, 8 Oct 2015 23:27:45 -0400
From: Nicholas Mahr KE8AKW <nicholasmahr1@xxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Fox-1A Telemetry Today
Message-ID:
<CAGu+VYt-OV5gwrFohXiX-=B2MRakEjqOu3p+u-SmaMjfdsbCug@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
I managed to get about 11 packets of data today on Fox-1! Im using HDSDR
feeding into fox tlm program. As far as I can tell all the telemetry looks
good. And nice to see the transponder turned on soon! Spent most of my day
today setting up sdr and tweaking the program to getting decodes on fox.
Lets grab more frames tomorrow and maybe the transponder guys.
73's Ke8akw Nick
------------------------------
Message: 10
Date: Thu, 8 Oct 2015 20:30:56 -0700
From: Bryce Salmi <bryce.salmi@xxxxx.xxx>
To: Amsat BB <AMSAT-BB@xxxxx.xxx>
Subject: [amsat-bb] Fox-1A Heard in Los Angeles
Message-ID:
<CAN5j0sozjh11pJ6+7p3ZGfxKvs35mZc8O8_M29BmQNtFSnjShQ@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
A bunch of us stopped building rockets for a few minutes and listened to
Fox-1A as it passed over Los Angeles!
Congrats.
Bryce
------------------------------
Message: 11
Date: Thu, 08 Oct 2015 22:32:38 -0500
From: "Tom Schuessler" <tjschuessler@xxxxxxx.xxx>
To: <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] First impressions of Fox-1A/AO-85/Grace2
Message-ID: <008f01d10243$256c3d50$7044b7f0$@xxx>
Content-Type: text/plain; charset=US-ASCII
>From EM12 Oct 8-9, 2015;
2348 UTC pass 2.8 degrees max elevation. HT and Arrow antenna, Satellite
showed up on time and could be heard despite low elevation and obstacles.
0124 UTC pass 60 degrees. HT and Elk antenna, Signal went from full
quieting to lots of noise.
Limited observation is that the spin/tumble rate must be rather fast. I am
sure it will take a bit for the magnetic stabilization to get a hold of the
magnetic lines of force and stabilize the cube.
First impression is the deep fades will be reminiscent of working
LituanicaSat-1/LO-78 which had deep nulls.
The pre-launch Keps seemed pretty accurate at least close enough for FM
work. Looking forward to the real thing.
Just curious and so I can characterize the orbit to some folks who expressed
interest, What level of inclination does AO-85 have? It seems by just
looking at a depiction on a map of over 80 degrees or am I observing wrong.
Anyway, big congrats to Barry, Jerry and the whole Fox design/implementation
team for a wonderful job well done. Fox has got me reinvigorated.
Tom Schuessler, N5HYP
------------------------------
Message: 12
Date: Thu, 8 Oct 2015 23:36:35 -0400
From: Loon - <w3mat@xxxxxxx.xxx>
To: AMSAT-BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Fox-1A, Grace, or AO-85
Message-ID: <SNT150-W450FFB3453383451EE3063E0340@xxx.xxx>
Content-Type: text/plain; charset="iso-8859-1"
Using Keps that were found on the Amsat-BB, below are the passes I found for
over the east coast forabout the next 24 hours
Which Keps set are for Foz-1A ... Grace 1, Grace 2, Grace 3, Grace 4, Grace5?
2015-10-09 04:22:57 FOX-1A 346.1 10.0 ecl 2389 67.6
-32.52015-10-09 04:27:41 FOX-1A 44.7 27.9 ? 1452 68.6
-31.62015-10-09 04:32:15 FOX-1A 103.4 10.0 ? 2305 69.5
-30.8
2015-10-09 06:03:15 FOX-1A 318.1 10.0 ? 2378 86.0
-14.12015-10-09 06:08:34 FOX-1A 244.1 50.9 ? 968 86.9
-13.12015-10-09 06:13:35 FOX-1A 169.3 10.1 ? 2242 87.7
-12.1
2015-10-09 20:17:08 FOX-1A 198.6 10.0 ? 2130 278.6
-19.52015-10-09 20:21:58 FOX-1A 118.3 63.6 ? 808 279.4
-20.42015-10-09 20:27:14 FOX-1A 38.2 10.1 ecl 2315 280.3
-21.4
2015-10-09 21:59:03 FOX-1A 266.8 10.0 ? 2220 298.8
-37.72015-10-09 22:03:04 FOX-1A 318.6 22.5 ecl 1590 299.7
-38.42015-10-09 22:07:17 FOX-1A 9.8 10.0 ecl 2347 300.7
-39.1
Thanks
------------------------------
Message: 13
Date: Fri, 9 Oct 2015 04:43:40 +0100
From: Peter Goodhall <peter@xxxxx.xxx>
To: Jerry Buxton <amsat@xxxx.xxx>
Cc: Amsat <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Fox-1A is in Transponder Mode
Message-ID:
<CAFvUaiqc3NkaTTMNSXfS7HtRx8-J9Y2vXS+s5YSMFpRFtHenGw@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Thanks Jerry, guess you mean 9th October?
Just tried the transponder over Europe and it sounds good, a lot
stronger than SO-50 for me, could hear it in between all the
University buildings down to just below 6 degrees.
Using Wimo X-Quads & IC-910.
73,
Peter, 2E0SQL
On 9 October 2015 at 04:14, Jerry Buxton <amsat@xxxx.xxx> wrote:
> Fox-1A will be in Transponder Mode until about 10:00 UTC October 8, 2015.
>
> Jerry
> N0JY
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
--
Peter Goodhall, 2E0SQL
------------------------------
Message: 14
Date: Thu, 8 Oct 2015 23:52:21 -0400
From: Zach Leffke <zleffke@xx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Does AMSAT want AO-85 decoded frames after the
fact?
Message-ID: <561739F5.2010800@xx.xxx>
Content-Type: text/plain; charset=utf-8; format=flowed
General question for those at AMSAT watching the data come in on the server.
Are frames decoded after the fact useful to you guys, or does it just
confuse the servers and mess up time stamps? I've been messing around
with my GNU radio setup and have low speed mode pretty much figured
out. For the high speed mode pass earlier, I got nice strong signal but
failed to decode. Pretty sure thats all my fault and I need to go back
and tweak my flowgraphs. I did make a raw IQ recording of the pass so
that I can go back and play around with GNU Radio until I get high speed
mode decoding on FoxTelem.
So the question is, while I'm messing around with that would you prefer
that I upload to the server or not? Eventually I hope to dig out the
missed frames (they're in there on my hard drive, I just need to coax
them out!), but I don't want to muddle up the time stamps on the AMSAT
Server. Are the telemetry frames uniquely coded in some way that you
can tell that I uploaded it 4 hours after it was overhead (like when I
upload sequence number 12, and everyone else is on sequence number 482?
for example)? Or are the timestamps based on the receiving computer's
clock, and I should be sure to uncheck the 'upload to server' block when
I go back to play with IQ recordings so as not to inject false
timestamps to the server?
And by the way: Go AMSAT!!!! Congrats all around! Exciting day today.
Thanks in advance,
-Zach, KJ4QLP
------------------------------
Message: 15
Date: Thu, 08 Oct 2015 21:06:44 -0700
From: Jerry Buxton <amsat@xxxx.xxx>
To: peter@xxxxx.xxx
Cc: Amsat <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Fox-1A is in Transponder Mode
Message-ID: <1b5376a5-b19d-4b24-a49a-d8b33981c36e@xxxxx.xxxxxxx.xxx>
Content-Type: text/plain; charset=utf-8
Yes, it's all still Wednesday to me... Thanks!
Jerry
N0JY
On Oct 8, 2015 8:43 PM, Peter Goodhall <peter@xxxxx.xxx> wrote:
>
> Thanks Jerry, guess you mean 9th October?
>
> Just tried the transponder over Europe and it sounds good, a lot
> stronger than SO-50 for me, could hear it in between all the
> University buildings down to just below 6 degrees.
>
> Using Wimo X-Quads & IC-910.
>
> 73,
>
> Peter, 2E0SQL
>
> On 9 October 2015 at 04:14, Jerry Buxton <amsat@xxxx.xxx> wrote:
> > Fox-1A will be in Transponder Mode until about 10:00 UTC October 8, 2015.
> >
> > Jerry
> > N0JY
> > _______________________________________________
> > Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
Opinions expressed
> > are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite program!
> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
>
>
> --
> Peter Goodhall, 2E0SQL
>
------------------------------
Message: 16
Date: Fri, 9 Oct 2015 06:13:18 +0200
From: "Mike Rupprecht" <mail@xxxxxxxxxxxxxx.xx>
To: "'Steve Kristoff'" <skristof@xxxxxxx.xxx>, "'AMSAT BB'"
<amsat-bb@xxxxx.xxx>
Cc: skristof@xxxxxxx.xxx
Subject: Re: [amsat-bb] Installing Sat Telem decoding such as
FoxTelem.exe
Message-ID: <001401d10248$d44f1b30$7ced5190$@xx>
Content-Type: text/plain; charset="iso-8859-1"
Hi Steve,
there is a zip file with all used ocx's on my software side. You can copy
the missing ocx into the windows/system directory.
Register the file manually - regsvr32 mschrt20.ocx
73 Mike
DK3WN
PS: I tried to send you the answer directly but my e-amil was rejected
(Timeout connecting to etczone.net)
-----Urspr?ngliche Nachricht-----
Von: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx Im Auftrag von Steve
Kristoff
Gesendet: 09 October 2015 03:02
An: AMSAT BB
Betreff: Re: [amsat-bb] Installing Sat Telem decoding such as FoxTelem.exe
Well, tried downloading Visual Basic Runtime, got about a dozen zip files,
tried to unzip them, don't know where to put them, etc.
Is there another XW-2C telemetry decoder that doesn't require MSCHRT20.ocx,
whatever that is?
Steve AI9IN
----- Original Message -----
From: "Peter Goodhall" <peter@xxxxx.xxx>
To: "Steve Kristoff" <skristof@xxxxxxx.xxx>
Cc: "AMSAT BB" <amsat-bb@xxxxx.xxx>
Sent: Thursday, October 08, 2015 9:23 AM
Subject: Re: [amsat-bb] Installing Sat Telem decoding such as FoxTelem.exe
> Steve,
>
> Not sure what dev tools the decoder is made from however I believe
> MSCHRT20 is a part of the Visual Basic Runtime so you can grab that
> from https://support.microsoft.com/en-us/vbruntime
>
> Pete, 2E0SQL
>
> On 8 October 2015 at 01:41, Steve Kristoff <skristof@xxxxxxx.xxx> wrote:
>> I'm having the same issue with the MSCHRT20.ocx file missing or invalid
>> or
>> whatever.
>> Can someone please point me to the fix or to another XW-2 telemetry
>> decoder?
>> Thank you.
>>
>> Steve AI9IN
>>
> _______________________________________________
>
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@xxxxx.xxx.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 10, Issue 300
*****************************************
Read previous mail | Read next mail
| |
