| |
CX2SA > SATDIG 05.12.15 23:36l 747 Lines 20535 Bytes #999 (0) @ WW
BID : AMSATBB10373
Read: GUEST
Subj: AMSAT-BB-digest V10 373
Path: IW8PGT<IV3ONZ<IZ3LSV<IW0QNL<JH4XSY<JE7YGF<7M3TJZ<CX2SA
Sent: 151204/2059Z @:CX2SA.SAL.URY.SOAM #:34833 [Salto] FBB7.00e $:AMSATBB10373
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Re: FAIL (Paul Stoetzer)
2. Re: FAIL (Mark Lunday)
3. Re: FAIL (Mark Lunday)
4. Re: FAIL (Paul Stoetzer)
5. Lisa Pahfinder (D. Craig Fox)
6. Re: Cygnus Ready For Launch (M5AKA)
7. DM83 (John Geiger)
8. Re: DM83 (Paul Stoetzer)
9. Cygnus Launch Scrubbed (B J)
10. Colorado Amateur Satellite net Begins in 1 hour (Skyler F)
11. More On Cygnus Launch Scrub (B J)
12. WD9EWK @ Mesa AZ hamfest on Saturday (5 December 2015)
(Patrick STODDARD (WD9EWK/VA7EWK))
13. Another Rotor Design - Great Fun, Easy to Build and Very
Cheap (Thomas Doyle)
14. Portable from EN 82 & EN 83 (jeffory broughton)
15. AO-73/FUNcube mode switch (Jim Heck G3WGM)
16. XW-2F Transponder OFF (Pedro Sousa)
17. Re: XW-2F Transponder OFF (Paul Stoetzer)
18. Re: XW-2F Transponder OFF (Joe Pereira)
----------------------------------------------------------------------
Message: 1
Date: Wed, 2 Dec 2015 20:54:05 -0500
From: Paul Stoetzer <n8hm@xxxx.xxx>
To: Mark Lunday <wd4elg@xxxxx.xx.xxx>
Cc: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] FAIL
Message-ID:
<CABzOSOoh+zVKoAtb=K7TwzaKTi5=vh32NF=kQHWd3pnQDJqEkA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
I was tuning around to see if I could find you! I worked PV8DX at my AOS
and called CQ until the satellite went over the roof of my apartment
building.
I usually start around 435.130 and tune up until I hear my signal enter the
passband around 145.970. Then I can tune around pretty easily. I do not use
computer control.
73,
Paul, N8HM
On Wednesday, December 2, 2015, Mark Lunday <wd4elg@xxxxx.xx.xxx> wrote:
> I heard N8HM very strong on the pass at 0140 UTC. Still not hearing my CW
> signal. I tried all over the passband. Will try again on the next pass
>
> Mark Lunday, WD4ELG
> Greensboro, NC FM06be
> wd4elg@xxxx.xxx <javascript:;>
> http://wd4elg.blogspot.com
>
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx <javascript:;>. AMSAT-NA makes this open
> forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 2
Date: Wed, 2 Dec 2015 21:05:18 -0500
From: "Mark Lunday" <wd4elg@xxxxx.xx.xxx>
To: "'Paul Stoetzer'" <n8hm@xxxx.xxx>
Cc: 'AMSAT BB' <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] FAIL
Message-ID: <009301d12d6f$0f628670$2e279350$@xx.xxx>
Content-Type: text/plain; charset="utf-8"
Paul, I will try again on the next pass.
Here is more detail on my station.
Attic antennas. No rotator. Both antennas pointed N.
144 MHz is an M2 2M9 SSB with an ARR pre-amp. 100 ft LMR 400
432 MHz is an Elk LPDA. 50 ft of LMR 400.
Rig is an IC910H used, with all the options installed. No computer control.
Man, this should be easy. When I was using the two FT817 rigs, even with 5
watts, it was simple to work stations on VO-52 and FO-29.
Paul, you were wicked strong, like S9, even with the satellite 30 degrees
off the main heading.
I supposed I could use another ELK for 144 MHz, but I would want a short
coax run like for 432. Right now, I have the two antennas about 50 feet
apart in the attic, and I am using the ARR pre-amp for the 144 MHz to make
up for the longer coax run.
Mark Lunday, WD4ELG
Greensboro, NC FM06be
wd4elg@xxxx.xxx
http://wd4elg.blogspot.com
From: prstoetzer@xxxxx.xxx [mailto:prstoetzer@xxxxx.xxxx On Behalf Of Paul
Stoetzer
Sent: Wednesday, December 02, 2015 8:54 PM
To: Mark Lunday
Cc: AMSAT BB
Subject: Re: [amsat-bb] FAIL
I was tuning around to see if I could find you! I worked PV8DX at my AOS and
called CQ until the satellite went over the roof of my apartment building.
I usually start around 435.130 and tune up until I hear my signal enter the
passband around 145.970. Then I can tune around pretty easily. I do not use
computer control.
73,
Paul, N8HM
On Wednesday, December 2, 2015, Mark Lunday <wd4elg@xxxxx.xx.xxx> wrote:
I heard N8HM very strong on the pass at 0140 UTC. Still not hearing my CW
signal. I tried all over the passband. Will try again on the next pass
Mark Lunday, WD4ELG
Greensboro, NC FM06be
wd4elg@xxxx.xxx <javascript:;>
http://wd4elg.blogspot.com
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx <javascript:;> . AMSAT-NA makes this open forum
available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 3
Date: Wed, 2 Dec 2015 21:08:50 -0500
From: "Mark Lunday" <wd4elg@xxxxx.xx.xxx>
To: "'Paul Stoetzer'" <n8hm@xxxx.xxx>
Cc: 'AMSAT BB' <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] FAIL
Message-ID: <000001d12d6f$8daf22e0$a90d68a0$@xx.xxx>
Content-Type: text/plain; charset="utf-8"
One more note. After the pass, I decided to check and see if I was actually
emitting RF on the uplink freq. So I cranked the power all the way down,
sent some dits, and I could hear the RF on one of the FT817 rigs. So I am
transmitting on 70 CM
Mark Lunday, WD4ELG
Greensboro, NC FM06be
wd4elg@xxxx.xxx
http://wd4elg.blogspot.com
------------------------------
Message: 4
Date: Wed, 2 Dec 2015 21:52:49 -0500
From: Paul Stoetzer <n8hm@xxxx.xxx>
To: Mark Lunday <wd4elg@xxxxx.xx.xxx>
Cc: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] FAIL
Message-ID:
<CABzOSOqrTKnSiNpW6M7NAYkBiXTgBoLrdXYUiv2fyC9sjiF2-g@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Your setup should be more than adequate for working AO-73. It's just a
matter of getting the frequencies right. Try my suggestion. I'll look for
you on this pass.
73,
Paul, N8HM
On Wed, Dec 2, 2015 at 9:08 PM, Mark Lunday <wd4elg@xxxxx.xx.xxx> wrote:
> One more note. After the pass, I decided to check and see if I was
> actually emitting RF on the uplink freq. So I cranked the power all the
> way down, sent some dits, and I could hear the RF on one of the FT817
> rigs. So I am transmitting on 70 CM
>
>
>
> Mark Lunday, WD4ELG
>
> Greensboro, NC FM06be
>
> wd4elg@xxxx.xxx
>
> http://wd4elg.blogspot.com
>
------------------------------
Message: 5
Date: Wed, 2 Dec 2015 20:06:22 -0800
From: "D. Craig Fox" <DFox@xxxxxx.xxx>
To: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Lisa Pahfinder
Message-ID:
<FE3B26F42CA36A4B976024BC0C5C57D6109ED83AA1@xxxxxxxxxx.xxx.xxx>
Content-Type: text/plain; charset="us-ascii"
Awesome liftoff
------------------------------
Message: 6
Date: Thu, 3 Dec 2015 12:32:03 +0000 (UTC)
From: M5AKA <m5aka@xxxxx.xx.xx>
To: amsat-bb <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Cygnus Ready For Launch
Message-ID:
<1724741050.24114180.1449145923563.JavaMail.yahoo@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
This launch is carrying two Astro Pi's to the ISS which may be used to
provide a video source for the HamTV system.
http://amsat-uk.org/2015/10/30/tim-peake-kg5bvi-iss-astro-pis/
As well as @xxxxxxxx the Cygnus also carries the first Elementary School
satellite STMsat 437.8 MHz, and other CubeSats such as CADRE intended for
later deployment from ISS.
IARU info on STMsat
http://www.amsatuk.me.uk/iaru/finished_detail.php?serialnum=460
73 Trevor M5AKA
--------------------------------------------
On Wed, 2/12/15, B J <va6bmj@xxxxx.xxx> wrote:
Subject: [amsat-bb] Cygnus Ready For Launch
To: "amsat-bb" <amsat-bb@xxxxx.xxx>
Date: Wednesday, 2 December, 2015, 22:50
http://spacenews.com/cygnus-poised-for-atlas-launch-to-iss/
73s
Bernhard VA6BMJ @ DO33FL
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx.
AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring
membership. Opinions expressed
are solely those of the author, and do not reflect the
official views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur
satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 7
Date: Thu, 3 Dec 2015 09:44:47 -0600
From: John Geiger <af5cc2@xxxxx.xxx>
To: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] DM83
Message-ID:
<CAHC1P2-xn6fLHyk8Z-WVvAtJrN3s+hQ3OegrRaPV3ONro74a1g@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Was someone portable in DM83 on the 15.35UTC pass of SO50?
73 John AF5CC
------------------------------
Message: 8
Date: Thu, 3 Dec 2015 11:05:15 -0500
From: Paul Stoetzer <n8hm@xxxx.xxx>
To: John Geiger <af5cc2@xxxxx.xxx>
Cc: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] DM83
Message-ID:
<CABzOSOrP8kL308brdAh-pAo+66t4Sq5ZSPHftem9RsX5uRPxDg@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
W5PFG was in DM82.
73,
Paul, N8HM
On Thu, Dec 3, 2015 at 10:44 AM, John Geiger <af5cc2@xxxxx.xxx> wrote:
> Was someone portable in DM83 on the 15.35UTC pass of SO50?
>
> 73 John AF5CC
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 9
Date: Thu, 3 Dec 2015 23:19:00 +0000
From: B J <va6bmj@xxxxx.xxx>
To: amsat-bb <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Cygnus Launch Scrubbed
Message-ID:
<CAP7QzkPHBj_R79_8BKyTd73_Xdwd1=Rp4vZ+pnUFcTJx5yM-Yg@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
The weather was unfavourable. The next attempt will be made tomorrow
but there's reportedly only a 30% of good conditions.
73s
Bernhard VA6BMJ @ DO33FL
------------------------------
Message: 10
Date: Thu, 3 Dec 2015 17:03:55 -0800
From: Skyler F <electricity440@xxxxx.xxx>
To: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Colorado Amateur Satellite net Begins in 1 hour
Message-ID:
<CAJNyT09iUeawr50HAawWCXH1_9Y9bj95NvvW8CYC3GfDMqvBpQ@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
This is a reminder that the Colorado Amateur Satellite net will begin in 1
hour from now (7PM mountain time Thursday).
6PM Pacific
7PM Mountain
8PM Central
9PM Eastern
Please visit us on
*AMSATNET.INFO <http://amsatnet.info/>*
*IRLP*
9870, the Denver Reflector
*ALLSTAR LINK*
40764, direct hookup to the repeater here. 41715, KC9ZHV hub at a data
center if I am out of bandwidth. More info on AllStar - amsatnet.info/#node
*ECHOLINK*
*AMSAT* unless there is an ARISS contact, then go direct to KD0WHB-L
*LOCAL RF*
449.625 (-) 141.3 ( W?KU Lookout Mountain)
447.225 (-) 141.3 (The STEM school repeater we set up)
447.850 (-) 141.3 (AC?KQ's repeater where he lives on TOP of saddleback
mountain)
147.450 SIMPLEX (Aurora, CO)
446.275 (-) 100.0 Galena St. Local repeater at my house, giving a whopping
5 blocks of great coverage
*REMOTE RF*
Your Repeater here!, Email me if you want to link in or me to link your
echolink or allstar repeater in automatically (no automatic IRLP linking
supported)
Skyler Fennell
amsatnet.info
KD?WHB
electricity440@xxxxx.xxx
------------------------------
Message: 11
Date: Fri, 4 Dec 2015 01:14:10 +0000
From: B J <va6bmj@xxxxx.xxx>
To: amsat-bb <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] More On Cygnus Launch Scrub
Message-ID:
<CAP7QzkNLTRwSdXROQ_3pgUnBWL8tkmBeUWspufEMp3EAtgCOBQ@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
http://www.nasaspaceflight.com/2015/12/cygnus-return-atlas-v-launch/
http://www.parabolicarc.com/2015/12/03/atlas-cygnus-launch-scrubbed-reschedule
d-friday/
http://www.spaceflightinsider.com/organizations/orbital-sciences-corp/rain-win
ds-scrub-launch-of-ula-atlas-v-with-oa-4-cygnus/
http://spacenews.com/weather-postpones-atlas-launch-of-cygnus-cargo-spacecraft
/
http://www.spacepolicyonline.com/news/next-u-s-cargo-spacecraft-ready-to-launc
h-to-iss
73s
Bernhard VA6BMJ @ DO33FL
------------------------------
Message: 12
Date: Fri, 4 Dec 2015 03:13:50 +0000
From: "Patrick STODDARD (WD9EWK/VA7EWK)" <amsat-bb@xxxxxx.xxx>
To: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] WD9EWK @ Mesa AZ hamfest on Saturday (5 December
2015)
Message-ID:
<CAN6TEUchtGUKzUZxwa2M5jVyW1AJueNkdnJCyx7efudWqzE4vg@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Hi!
Just a reminder that I will have an AMSAT booth at the Superstition Amateur
Radio Club's Superfest hamfest on Saturday (5 December) morning. This
hamfest is at the Mesa Community College, along the east side of Dobson
Road between Southern Avenue and the US-60 freeway in Mesa, Arizona. The
hamfest officially opens at 7am, but I'm sure there will be people at the
hamfest site an hour or two before that. It officially ends at 2pm. More
information about the hamfest is available at:
http://superstitionsuperfest.org/
WD9EWK will work various satellite passes from approximately 6am (1300 UTC)
until either the crowd at the hamfest disappears, or the official end of
the hamfest at 2pm (2100 UTC). Please call WD9EWK and be part of the on-air
demonstrations. After the hamfest, my log will be uploaded to Logbook of
the World, and QSL cards will be available on request (please e-mail me
directly with the QSO details). The hamfest site is in grid DM43.
Thanks in advance, and 73!
Patrick WD9EWK/VA7EWK
http://www.wd9ewk.net/
Twitter: @xxxxxx
------------------------------
Message: 13
Date: Fri, 4 Dec 2015 10:31:30 -0600
From: Thomas Doyle <tomdoyle1948@xxxxx.xxx>
To: AMSAT <AMSAT-BB@xxxxx.xxx>
Subject: [amsat-bb] Another Rotor Design - Great Fun, Easy to Build
and Very Cheap
Message-ID:
<CAHnRQR+PZJO-oB-Damy1p29xaMTW91aOXbsy6K4F-uxCsEPrKQ@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Hi,
http://www.tomdoyle.org/3dPrinterRotor-1
73 W9KE Tom Doyle
------------------------------
Message: 14
Date: Fri, 4 Dec 2015 12:00:00 -0500
From: jeffory broughton <jefforybroughton@xxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Portable from EN 82 & EN 83
Message-ID:
<CACm2je39tk=pMVj6KS5310UHkm0TX=L-PgRUN-H10Y8UoBtxug@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
This Sunday I will be operating 6 passes from the EN 82 & EN 83 line.From
9 am to 4 pm.My buddy John will be operating some of them under my call to
get his feet wet! Just made a 2 hour trip to get the landowners permission
,whew!
WB8RJY.JEFF
jeff broughton
------------------------------
Message: 15
Date: Fri, 4 Dec 2015 18:28:31 -0000
From: "Jim Heck G3WGM" <jimlist@xxxx.xxx>
To: <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] AO-73/FUNcube mode switch
Message-ID: <1BA63E479589477381BD59F3E05A7A16@xxxxxx>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
Hi Folks,
I have just switched AO-73/FUNcube into full time transponder mode, so It
will be active throughout the weekend.
As usual the plan is to switch it back to auto switching mode on Sunday PM
UTC
More at funcube.org.uk. Enjoy!
Jim G3WGM
------------------------------
Message: 16
Date: Fri, 4 Dec 2015 19:16:03 -0100
From: Pedro Sousa <pedro@xxxxxxxxxx.xxxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] XW-2F Transponder OFF
Message-ID: <5661F483.70805@xxxxxxxxxx.xxxx>
Content-Type: text/plain; charset=utf-8; format=flowed
Hi all,
The pass over HM77fr around 20:10 UTC showed XW-2F with CW beacon and
telemetry on, but the transponder was off. Adjusted my TS-2000 XIT
between -20 to +20kHz. Nowhere to be found.
Hope it's not another case like XW-2E.
73 de Pedro CU2ZG
---
Este e-mail foi verificado em termos de v?rus pelo software antiv?rus Avast.
https://www.avast.com/antivirus
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
------------------------------
Message: 17
Date: Fri, 4 Dec 2015 15:17:12 -0500
From: Paul Stoetzer <n8hm@xxxx.xxx>
To: Pedro Sousa <pedro@xxxxxxxxxx.xxxx>
Cc: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] XW-2F Transponder OFF
Message-ID:
<CABzOSOoZktfORHQq=qc5JN1PRfGaL2EvNVbaq-eQHC_9OXF=YQ@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Well, at least it isn't silent like XW-2E.
73,
Paul, N8HM
On Fri, Dec 4, 2015 at 3:16 PM, Pedro Sousa via AMSAT-BB <amsat-bb@xxxxx.xxx
> wrote:
> Hi all,
>
> The pass over HM77fr around 20:10 UTC showed XW-2F with CW beacon and
> telemetry on, but the transponder was off. Adjusted my TS-2000 XIT
> between -20 to +20kHz. Nowhere to be found.
> Hope it's not another case like XW-2E.
>
> 73 de Pedro CU2ZG
>
> ---
> Este e-mail foi verificado em termos de v?rus pelo software antiv?rus
> Avast.
> https://www.avast.com/antivirus
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 18
Date: Sat, 5 Dec 2015 07:28:16 +1030
From: Joe Pereira <joevk5ei@xxxxx.xxx>
To: Paul Stoetzer <n8hm@xxxx.xxx>
Cc: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] XW-2F Transponder OFF
Message-ID:
<CAEW3GkKZAA4ONFX3vC6ZPL3OtTU=j6qPZ7cje8gPYce_w_V+rw@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Same here Pedro, just tried at 20:58 UTC and CW beacon only.
73
Joe
On Sat, Dec 5, 2015 at 6:47 AM, Paul Stoetzer <n8hm@xxxx.xxx> wrote:
> Well, at least it isn't silent like XW-2E.
>
> 73,
>
> Paul, N8HM
>
> On Fri, Dec 4, 2015 at 3:16 PM, Pedro Sousa via AMSAT-BB <
> amsat-bb@xxxxx.xxx
> > wrote:
>
> > Hi all,
> >
> > The pass over HM77fr around 20:10 UTC showed XW-2F with CW beacon and
> > telemetry on, but the transponder was off. Adjusted my TS-2000 XIT
> > between -20 to +20kHz. Nowhere to be found.
> > Hope it's not another case like XW-2E.
> >
> > 73 de Pedro CU2ZG
> >
> > ---
> > Este e-mail foi verificado em termos de v?rus pelo software antiv?rus
> > Avast.
> > https://www.avast.com/antivirus
> >
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
> >
> > _______________________________________________
> > Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions
> > expressed
> > are solely those of the author, and do not reflect the official views of
> > AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@xxxxx.xxx.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 10, Issue 373
*****************************************
Read previous mail | Read next mail
| |
