| |
CX2SA > SATDIG 08.12.16 01:29l 554 Lines 17723 Bytes #999 (0) @ WW
BID : AMSATBB11387
Read: GUEST
Subj: AMSAT-BB-digest V11 387
Path: IW8PGT<IZ3LSV<IW0QNL<OK0NBR<OK0PBR<OK2PEN<CX2SA
Sent: 161207/2323Z @:CX2SA.SAL.URY.SOAM #:59637 [Salto] FBB7.00e $:AMSATBB11387
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Free to a good home: LVB tracker board (Norm n3ykf)
2. IC-910 Split operation in SatPc32 (LB2TG Paul)
3. Re: IC-910 Split operation in SatPc32 (LB2TG Paul)
4. Re: IC-910 Split operation in SatPc32 (Jeff)
5. Re: IC-910 Split operation in SatPc32 (LB2TG Paul)
6. Tigrisat Cubesat (Gustavo Carpignano)
7. Re: VE3FRH silent Key (GW1FKY@xxx.xxxx
8. A Little Help Please (Gerald Payton)
9. Re: A Little Help Please (Greg D)
10. Re: A Little Help Please (PE0SAT | Amateur Radio)
11. Re: A Little Help Please (JoAnne K9JKM)
12. The Russian Woodpecker (Robert Bruninga)
----------------------------------------------------------------------
Message: 1
Date: Wed, 7 Dec 2016 01:05:39 -0500
From: Norm n3ykf <normanlizeth@xxxxx.xxx>
To: "<,amsat-bb@xxxxx.xxxxxxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Free to a good home: LVB tracker board
Message-ID:
<CAJUhCTPsmyFRp9Usg4_QGkryW8t8VUi_H3mw2V0XaDWpfpCH7A@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Dead LVB tracker board. Good ADC AZ and EL. Took a lightening strike.
Shot the bug down to the serial port. No output. Is it the uC or the
line driver?
I'll include a direct cross for the latter. Lucky recipient will have
the pleasure of crossing his or her fingers and powering up.
Any 16x2 44870 compatible display will work.
NO LCD, CASE OR BUTTONS. These had a higher calling.
PS: I'll include the never working difficult to find AMSAT official
USB port. Great conversation piece.
Norm n3ykf
------------------------------
Message: 2
Date: Wed, 7 Dec 2016 11:16:58 +0000
From: LB2TG Paul <LB2TG@xxxxxxx.xxx>
To: Amsat BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] IC-910 Split operation in SatPc32
Message-ID:
<DB5PR08MB0808BB25D205954C97A798F3E0850@xxxxxxxxxxxxx.xxxxxxxx.xxxx.xxxxxxx.xx
x>
Content-Type: text/plain; charset="iso-8859-1"
I have one more question to make.....
How do you set up SatPc32 so the IC-910 are working split? Like when
SatPc32ISS is stared.
I mean when both up- and downlink are in the same band, or same freq, just
correcting for dopplershift.
So far I have not found anything in the manual. Connecting two different
radios maybe works.......
73, Paul LB2TG
------------------------------
Message: 3
Date: Wed, 7 Dec 2016 11:39:40 +0000
From: LB2TG Paul <LB2TG@xxxxxxx.xxx>
To: Glenn Miller - AA5PK <aa5pk@xxxxxxxxxx.xxx>, Amsat BB
<amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] IC-910 Split operation in SatPc32
Message-ID:
<DB5PR08MB0808F595C71B6B4C798F9DCFE0850@xxxxxxxxxxxxx.xxxxxxxx.xxxx.xxxxxxx.xx
x>
Content-Type: text/plain; charset="iso-8859-1"
Hi.
Yes I know, but how do you set up SatPC to do this?
--- 73, Paul
________________________________________
Fra: Glenn Miller - AA5PK <aa5pk@xxxxxxxxxx.xxx>
Sendt: 7. desember 2016 12:32
Til: LB2TG Paul
Emne: Re: [amsat-bb] IC-910 Split operation in SatPc32
Paul,
Page 37 of the manual deals with split frequency operation.
[split]
-----Original Message-----
From: LB2TG Paul
Sent: Wednesday, December 07, 2016 5:16 AM
To: Amsat BB
Subject: [amsat-bb] IC-910 Split operation in SatPc32
I have one more question to make.....
How do you set up SatPc32 so the IC-910 are working split? Like when
SatPc32ISS is stared.
I mean when both up- and downlink are in the same band, or same freq, just
correcting for dopplershift.
So far I have not found anything in the manual. Connecting two different
radios maybe works.......
73, Paul LB2TG
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 4
Date: Wed, 7 Dec 2016 07:32:58 -0500
From: "Jeff" <kb2m@xxxxxxx.xxx>
To: "LB2TG Paul" <LB2TG@xxxxxxx.xxx>, "Amsat BB" <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] IC-910 Split operation in SatPc32
Message-ID: <329F7A49614142CC803CEAE6080FA2CF@xxxxxxx>
Content-Type: text/plain; format=flowed; charset="UTF-8";
reply-type=original
Hi Paul, you need to run SatPC32ISS. I've never used this program, but
others on here have if you run into any issues.
>From the SatPC32 manual....
1. SatPC32ISS
SatPC32ISS.Exe is a special version of the SatPC32 main program SatPC32.Exe,
that is intended to be used for amateur radio contacts with the ISS or other
transponders with uplink and downlink in the same band ('In-Band'
satellites). The 'normal? SatPC32 doesn't support 'In-Band?
operation.because it switches the satellite radios into the satellite mode.
That mode allows full duplex operation (receiving and transmitting at the
same time). Therefore it requires the uplink and downlink frequencies to be
in different bands.
73 Jeff kb2m
-----Original Message-----
From: LB2TG Paul
Sent: Wednesday, December 07, 2016 6:39 AM
To: Glenn Miller - AA5PK ; Amsat BB
Subject: Re: [amsat-bb] IC-910 Split operation in SatPc32
Hi.
Yes I know, but how do you set up SatPC to do this?
--- 73, Paul
________________________________________
Fra: Glenn Miller - AA5PK <aa5pk@xxxxxxxxxx.xxx>
Sendt: 7. desember 2016 12:32
Til: LB2TG Paul
Emne: Re: [amsat-bb] IC-910 Split operation in SatPc32
Paul,
Page 37 of the manual deals with split frequency operation.
[split]
-----Original Message-----
From: LB2TG Paul
Sent: Wednesday, December 07, 2016 5:16 AM
To: Amsat BB
Subject: [amsat-bb] IC-910 Split operation in SatPc32
I have one more question to make.....
How do you set up SatPc32 so the IC-910 are working split? Like when
SatPc32ISS is stared.
I mean when both up- and downlink are in the same band, or same freq, just
correcting for dopplershift.
So far I have not found anything in the manual. Connecting two different
radios maybe works.......
73, Paul LB2TG
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 5
Date: Wed, 7 Dec 2016 13:05:14 +0000
From: LB2TG Paul <LB2TG@xxxxxxx.xxx>
To: Jeff <kb2m@xxxx.xxx>, Amsat BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] IC-910 Split operation in SatPc32
Message-ID:
<DB5PR08MB0808C80B4B37C350FD8FD36BE0850@xxxxxxxxxxxxx.xxxxxxxx.xxxx.xxxxxxx.xx
x>
Content-Type: text/plain; charset="Windows-1252"
Wohooo :-)
Why didn't I think of that... slow person maybe.... hi
Honestly, I did not notice the text in that chapter so I have only used it
for the ISS.
I think my "problem" are solved this now.
Thank you so much!
73, Paul LB2tg
________________________________________
Fra: Jeff <kb2m@xxxxxxx.xxx>
Sendt: 7. desember 2016 13:32
Til: LB2TG Paul; Amsat BB
Emne: Re: [amsat-bb] IC-910 Split operation in SatPc32
Hi Paul, you need to run SatPC32ISS. I've never used this program, but
others on here have if you run into any issues.
>From the SatPC32 manual....
1. SatPC32ISS
SatPC32ISS.Exe is a special version of the SatPC32 main program SatPC32.Exe,
that is intended to be used for amateur radio contacts with the ISS or other
transponders with uplink and downlink in the same band ('In-Band'
satellites). The 'normal? SatPC32 doesn't support 'In-Band?
operation.because it switches the satellite radios into the satellite mode.
That mode allows full duplex operation (receiving and transmitting at the
same time). Therefore it requires the uplink and downlink frequencies to be
in different bands.
73 Jeff kb2m
-----Original Message-----
From: LB2TG Paul
Sent: Wednesday, December 07, 2016 6:39 AM
To: Glenn Miller - AA5PK ; Amsat BB
Subject: Re: [amsat-bb] IC-910 Split operation in SatPc32
Hi.
Yes I know, but how do you set up SatPC to do this?
--- 73, Paul
________________________________________
Fra: Glenn Miller - AA5PK <aa5pk@xxxxxxxxxx.xxx>
Sendt: 7. desember 2016 12:32
Til: LB2TG Paul
Emne: Re: [amsat-bb] IC-910 Split operation in SatPc32
Paul,
Page 37 of the manual deals with split frequency operation.
[split]
-----Original Message-----
From: LB2TG Paul
Sent: Wednesday, December 07, 2016 5:16 AM
To: Amsat BB
Subject: [amsat-bb] IC-910 Split operation in SatPc32
I have one more question to make.....
How do you set up SatPc32 so the IC-910 are working split? Like when
SatPc32ISS is stared.
I mean when both up- and downlink are in the same band, or same freq, just
correcting for dopplershift.
So far I have not found anything in the manual. Connecting two different
radios maybe works.......
73, Paul LB2TG
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 6
Date: Wed, 7 Dec 2016 14:38:54 +0000 (UTC)
From: Gustavo Carpignano <lw2dtz@xxxxx.xxx.xx>
To: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Tigrisat Cubesat
Message-ID: <877309872.1451523.1481121534403@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Tigrisat , the Irak's ?first cubesat, is transmitting in 435 MhZ at 9K6 FSK
G3RUH. It's modulation is very clear and easy to decode to anybody that
wants to start to decode this type of satellite. Here you can find a live
capture: https://youtu.be/_eo6rqb5EVY
73 Gustavo, LW2DTZ
------------------------------
Message: 7
Date: Wed, 7 Dec 2016 10:49:05 -0500
From: GW1FKY@xxx.xxx
To: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] VE3FRH silent Key
Message-ID: <769abb.43072bee.45798970@xxx.xxx>
Content-Type: text/plain; charset="US-ASCII"
I was very saddened to learn of the passing away of Robin Haighton (
VE3FRH)
I had the great pleasure of meeting Robin in the year 2001 during a visit
to the UK for the Amsat Colloquium,
He had relatives over here as his wife had lived in the village of Rhoose,
Vale of Glamorgan, South Wales - Not to far away from my own QTH.
Along with some other colleagues we great pleasure in talking to him and
one of the subjects was ARISS School Contacts
When Robin returned home he very kindly (at his own expense ) sent me a CD
containing a video recording
of the ISS link up with "KC0PCH " ( Parkway Central high School ).
I was able to show this to many other interested parties and youngsters and
it really pioneered the way forward for our hobby.
My most of those in the video have matured and grown up - I am sure many
will still remember the experience.
Many thanks Robin - a very nice and respected person. - RIP.
My thoughts are with family and friends.
Ken Eaton
GW1FKY
Amsat-UK
Amsat NA
------------------------------
Message: 8
Date: Wed, 7 Dec 2016 21:07:58 +0000
From: Gerald Payton <gp_ab5r@xxxxxxx.xxx>
To: Amsat BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] A Little Help Please
Message-ID:
<MWHPR11MB195269BDC669849B252C9144D0850@xxxxxxxxxxxxx.xxxxxxxx.xxxx.xxxxxxx.xx
x>
Content-Type: text/plain; charset="iso-8859-1"
I am trying to install equipment for packet communication through ISS. I
thought that UISS software worked with EITHER a software modem OR a TNC, but
reading (at least starting to read) the 75 page manual, apparently it does
not.
Since it does not, please suggest another terminal program or APRS/Packet
specific program.
My approach for the hardware is an old MFJ-1270C TNC. I'm trying to learn
its ins and outs from its 287 page outdated manual. GROINK Additionally, I
have a cable ordered with modular end for my radio (IC-2730).
Any advise or Elmer-ing will be highly appreciated. It has been over ten
years since I had any experience with packet or APRS.
My personal email is either AB5R at AMSAT, ARRL or gp_ab5r@xxxxxxx.xxx
73,
Jerry AB5R
------------------------------
Message: 9
Date: Wed, 7 Dec 2016 13:21:22 -0800
From: Greg D <ko6th.greg@xxxxx.xxx>
To: Gerald Payton <gp_ab5r@xxxxxxx.xxx>
Cc: Amsat BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] A Little Help Please
Message-ID: <58487D52.8000203@xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
My preference for APRS terminal programs is Lynn Deffenbaugh's APRSIS/32
(http://aprsisce.wikidot.com/). Haven't used Packet by itself
(non-APRS) in probably a decade...
Note the settings recommended for satellite operation, as different from
terrestrial APRS. http://aprsisce.wikidot.com/doc:satelliteops
Enjoy,
Greg KO6TH
Gerald Payton wrote:
> I am trying to install equipment for packet communication through ISS. I
thought that UISS software worked with EITHER a software modem OR a TNC, but
reading (at least starting to read) the 75 page manual, apparently it does
not.
>
>
> Since it does not, please suggest another terminal program or APRS/Packet
specific program.
>
>
> My approach for the hardware is an old MFJ-1270C TNC. I'm trying to learn
its ins and outs from its 287 page outdated manual. GROINK Additionally, I
have a cable ordered with modular end for my radio (IC-2730).
>
>
> Any advise or Elmer-ing will be highly appreciated. It has been over ten
years since I had any experience with packet or APRS.
>
>
> My personal email is either AB5R at AMSAT, ARRL or gp_ab5r@xxxxxxx.xxx
>
> 73,
>
> Jerry AB5R
>
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 10
Date: Wed, 07 Dec 2016 22:24:22 +0100
From: PE0SAT | Amateur Radio <pe0sat@xxxxx.xx>
To: Gerald Payton <gp_ab5r@xxxxxxx.xxx>
Cc: Amsat BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] A Little Help Please
Message-ID: <811245bdb9570300dbff97f4563155cf@xxxxx.xx>
Content-Type: text/plain; charset=US-ASCII; format=flowed
Hello Gerald,
Look at AGW Packet Engine, this can be connected to a hardware TNC in
kiss mode.
When that is working connect UISS via the AGW protocol to AGW Packet
Engine.
So the setup would look like:
UISS -- via localhost tcp port 8000 -> AGW Packet Engine -- via RS232
serial --> MFJ-1270C TNC
73 Jan PE0SAT
---
With regards PE0SAT
Internet web-page http://www.pe0sat.vgnet.nl/
DK3WN SatBlog http://www.dk3wn.info/p/
Online Telemetry Forwarder: http://tlm.pe0sat.nl/
irc://chat.freenode.net #Cubesat - Twitter @xxxxxx
On 07-12-2016 22:07, Gerald Payton wrote:
> I am trying to install equipment for packet communication through ISS.
> I thought that UISS software worked with EITHER a software modem OR a
> TNC, but reading (at least starting to read) the 75 page manual,
> apparently it does not.
>
>
> Since it does not, please suggest another terminal program or
> APRS/Packet specific program.
>
>
> My approach for the hardware is an old MFJ-1270C TNC. I'm trying to
> learn its ins and outs from its 287 page outdated manomised and so the nuke disaster was an
attempt by a Moscow Bureaucrat to cause a ?situation? at the nuke plant on
that fateful day to cause enough of a problem to cause the big INSPECTION
of the Woodpecker next door secheduled that same week, to be canceled? to
hide their bureaucratic failure to work as promised.
It was made by a Ukranian in brash defiance of the Russians, so there is an
agenda here?
Very interesting?. As conspiracy theories go? but also scary when you see
the same kind of lies and deception in politicians today that was going on
then too.
Bob, Wb4APR
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@xxxxx.xxx.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 11, Issue 387
*****************************************
Read previous mail | Read next mail
| |
