| |
CX2SA > SATDIG 13.04.17 17:42l 693 Lines 23997 Bytes #999 (0) @ WW
BID : AMSATBB1296
Read: GUEST
Subj: AMSAT-BB-digest V12 96
Path: IW8PGT<CX2SA
Sent: 170413/1534Z @:CX2SA.SAL.URY.SOAM #:4860 [Salto] FBB7.00e $:AMSATBB1296
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. KB1RVT on the sats (Bill Acito)
2. Re: Orbitron Question (Armand SP3QFE)
3. Yaesu FT-847 forsale (n4qwf .)
4. Re: Upcoming ARISS Contact Schedule as of 2017-04-11 05:00
UTC (charles sikes)
5. Linear vs Circular Polarization (Brady Gordon)
6. Re: Linear vs Circular Polarization (Richard Tejera)
7. Re: Linear vs Circular Polarization (R.T.Liddy)
8. Re: Linear vs Circular Polarization (Zach Leffke)
9. Re: Orbitron Question (Scott)
10. Vhf sat ants for sale (jeffory broughton)
11. AO-73/FUNcube Mode switch (Jim Heck G3WGM)
12. funcube dongle (willmarbrowns@xxxxxxx.xxxx
13. W5PFG/P FM02 South Carolina (Clayton Coleman)
----------------------------------------------------------------------
Message: 1
Date: Tue, 11 Apr 2017 20:32:35 +0000
From: Bill Acito <w1pa@xxxxxxx.xxx>
To: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] KB1RVT on the sats
Message-ID:
<MWHPR15MB12627FB7F0C5632E6B4E5C4A98000@xxxxxxxxxxxxx.xxxxxxxx.xxxx.xxxxxxx.xx
x>
Content-Type: text/plain; charset="iso-8859-1"
Nick,
I must be missing something. Are the covenants strict enough that you can 't
walk outside with an Arrow and HT, work a pass, and then walk back in again?
(pretty much my modus operandi)
Bill W1PA
------------------------------
Message: 2
Date: Wed, 12 Apr 2017 10:51:46 +0200
From: Armand SP3QFE <kontakt@xxxxxx.xxx>
To: Paul Ecker <eckerpw@xxxxx.xxx>
Cc: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] Orbitron Question
Message-ID: <95f4a02ee18c921bc99e94e17d05a0f9@xxxxxx.xxx>
Content-Type: text/plain; charset=UTF-8; format=flowed
Hi Paul,
TLE data about the amateur satellites are in file: amateur.txt
Click on the button "Load TLE" or use Left ALT + L then select file:
amateur.txt
On the right side you will see list of satellites connected with HAM
radio. You can select items that are interesting for you (check the
square).
In a case, when you want to follow a lunch of new satellites
(CubeSat?s), then you can use also tle-new.txt (instead of amateur.txt).
There will temporary names (not real names of satelites).
When CubeSat?s are recognized in the sky and confirmed their position,
then items with "right name" should appear in amateur.txt file.
73, Armand SP3QFE
On 2017-04-11 16:18, Paul Ecker wrote:
> I read about Orbitron on this list, never have used but just
> downloaded. Is
> there a way to have it just list the amateur satellites?
>
> Paul
> kc2nyu
------------------------------
Message: 3
Date: Wed, 12 Apr 2017 15:57:11 -0400
From: "n4qwf ." <n4qwf1@xxxxx.xxx>
To: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Yaesu FT-847 forsale
Message-ID:
<CA+Fxo6QfPBy5HP0+6NB+jUN8sDy3Z_0DwXs1nOd2JW=vNOCkBg@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
I am selling my FT-847 satellite radio. I offer it here before it goes to
Raleigh Hamfest this weekend. I am asking $895.00 plus shipping. It has the
power cable and hand mic and original manual. It ships in the original box.
It is in excellent condition from a non-smoking home.
First response gets it.
Thanks and 73<<John
--
N4QWF Amateur Radio Operator
Email N4QWF@xxxxx.xxx
Formerly KC4AHW VK3FEZ
8BDXCC
DXCC mixed 327
WAS HF #57,114
WAS Triple Play #1270
WAZ HF #9073
AAA All Africa Award #1734
VUCC SAT #135
WAS SAT #296
OSCAR-11 20th birthday #1
51 on AO-51 #13
LON -79.256 LAT 37.459 Grid FM07il
>From the Foothills of the Blue Ridge Mountains
*Life should not be a journey to the grave with the intention of arriving
safely in a pretty and well preserved body, but rather to skid in
broadside, thoroughly used up, totally worn out, and loudly proclaiming -
"WOW, What a ride!"
------------------------------
Message: 4
Date: Tue, 11 Apr 2017 20:31:15 -0700
From: charles sikes <charliesikes@xxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] Upcoming ARISS Contact Schedule as of
2017-04-11 05:00 UTC
Message-ID: <6744470F-78CF-449E-AE5E-CF008CCB5F9D@xxx.xxx>
Content-Type: text/plain; charset=us-ascii
You might try contacting Darryl Paule KI6MSP. I believe he is coordinating
the event for Brookhaven. Darryl's email is
ki6msp@xxxxx.xxx
Charlie, KZ6T
------------------------------
Message: 5
Date: Wed, 12 Apr 2017 15:11:53 -0600
From: Brady Gordon <ac0xr@xxxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Linear vs Circular Polarization
Message-ID:
<CABVJtOaxys3GxdcL7E+gvUOPL6WJWAC=yk7dZE+fY716CNu3xA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Hi Everyone,
I'm working on building a pair of crossed yagis for 2m and 70cm, and I have
some questions. I apologize if this has been discussed before, but I
couldn't find answers online so I was hoping you all could help me out.
First, it seems easiest to me to build an antenna system that can either
switch between vertical and horizontal linear polarizations, or between
right hand and left hand circular polarization. Which would be more
useful? And is it worth the extra effort to build an antenna system that
can switch between all four polarizations?
Also, I've been looking at the different ways of achieving circular
polarization. I like the idea of using mechanical 1/4 wave separation
between the two yagis so I don't have to cut phasing lines. Would it be
possible to switch polarizations by putting a relay at the feedpoint of one
of the yagis and switching which side of the driven element the center
conductor and shield of the coax goes to? I've never seen this done
before, but it seems to me it would work. Any thoughts?
Thanks and 73,
Brady AC0XR
------------------------------
Message: 6
Date: Wed, 12 Apr 2017 15:51:36 -0700
From: Richard Tejera <Saguaroastro@xxx.xxx>
To: Brady Gordon <ac0xr@xxxxxx.xxx>, 'AMSAT' <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Linear vs Circular Polarization
Message-ID: <bqchbecd4myocb1jy6ng41pf.1492037496456@xxxxx.xxxxxxx.xxx>
Content-Type: text/plain; charset=utf-8
Brady,
Domenici, I8cvs SK had published a pair of articles on making a switching
relay between vertical, Horizontal, LHCP & RHCP. he sent me PDF's, which are
in my to do someday folder.
Contact me off list (email is good on QRZ), and I will send them to you.
They are for 70cm, but certainly can be adapted for 2m easily enough.
Rick Tejera K7TEJ
Saguaro Astronomy Club
www.SaguaroAstro.org
Thunderbird Amateur Radio Club
www.w7tbc.org
On April 12, 2017, at 14:11, Brady Gordon <ac0xr@xxxxxx.xxx> wrote:
Hi Everyone,
I'm working on building a pair of crossed yagis for 2m and 70cm, and I have
some questions. I apologize if this has been discussed before, but I
couldn't find answers online so I was hoping you all could help me out.
First, it seems easiest to me to build an antenna system that can either
switch between vertical and horizontal linear polarizations, or between
right hand and left hand circular polarization. Which would be more
useful? And is it worth the extra effort to build an antenna system that
can switch between all four polarizations?
Also, I've been looking at the different ways of achieving circular
polarization. I like the idea of using mechanical 1/4 wave separation
between the two yagis so I don't have to cut phasing lines. Would it be
possible to switch polarizations by putting a relay at the feedpoint of one
of the yagis and switching which side of the driven element the center
conductor and shield of the coax goes to? I've never seen this done
before, but it seems to me it would work. Any thoughts?
Thanks and 73,
Brady AC0XR
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 7
Date: Wed, 12 Apr 2017 23:25:47 +0000 (UTC)
From: "R.T.Liddy" <k8bl@xxxxxxxxx.xxx>
To: Brady Gordon <ac0xr@xxxxxx.xxx>, "amsat-bb@xxxxx.xxxx
<amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Linear vs Circular Polarization
Message-ID: <84686270.850648.1492039547710@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Brady,
I found a good discussion on this topic at:
https://forums.qrz.com/index.php?threads/vertical-or-angle-for-2m-70cm-circula
rly-polarized-antennas.507628/
And here's a link for a discussion on CP antennas:
http://www.qsl.net/sv1bsx/antenna-pol/polarization.html
BTW, I have linear antennas, 2M Horiz & 70 cm Vert, and experience deep
fades. This requires me to time my calls to when I'm fairly sure I'll be
able to hear responses.
GL/73, Bob K8BL
P.S. Don't Google RHCP unless you are a fan of the Red Hot Chili Peppers! :o)
________________________________
From: Brady Gordon <ac0xr@xxxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Sent: Wednesday, April 12, 2017 5:17 PM
Subject: [amsat-bb] Linear vs Circular Polarization
Hi Everyone,
I'm working on building a pair of crossed yagis for 2m and 70cm, and I have
some questions. I apologize if this has been discussed before, but I
couldn't find answers online so I was hoping you all could help me out.
First, it seems easiest to me to build an antenna system that can either
switch between vertical and horizontal linear polarizations, or between
right hand and left hand circular polarization. Which would be more
useful? And is it worth the extra effort to build an antenna system that
can switch between all four polarizations?
Also, I've been looking at the different ways of achieving circular
polarization. I like the idea of using mechanical 1/4 wave separation
between the two yagis so I don't have to cut phasing lines. Would it be
possible to switch polarizations by putting a relay at the feedpoint of one
of the yagis and switching which side of the driven element the center
conductor and shield of the coax goes to? I've never seen this done
before, but it seems to me it would work. Any thoughts?
Thanks and 73,
Brady AC0XR
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 8
Date: Wed, 12 Apr 2017 19:28:19 -0400
From: Zach Leffke <zleffke@xx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] Linear vs Circular Polarization
Message-ID: <68d063ab-8abe-d3fc-d4ac-a27031135d0f@xx.xxx>
Content-Type: text/plain; charset=windows-1252; format=flowed
Hi Brady,
My quick three cents:
first penny) The coax relay at the feedpoint method is feasible and is
how the M2 Antennas Inc. switchable polarization sense feedpoints work.
I have no personal experience fabricating these, but we use them in the
VT Ground station to switch between LHCP/RHCP. M2 Antennas
documentation warns of a slight VSWR increase with this technique, but
so far (couple years now) they have performed great for us.
second penny) While you might not have to cut phasing lines with the
1/4 wave offset technique, you will likely need to cut 1/4 wave
impedance transformation lines. If your two feedpoints are 50 ohms
each, then a 1/4 wave transformer of 75 coax will be needed
(transforming to 100 Ohms) so that when they are placed in parallel (via
a splitter/combiner) you present 50 ohms to the feedline/radio. This
link has a lot of good info on this:
http://www.qsl.net/sv1bsx/antenna-pol/polarization.html
third penny) There is a great section in the ARRL Antenna Book (I think
in the Antennas for Space Communications chapter) about using a coax
relay and a pair of 50 ohm feedpoint yagis to achieve circular
polarization. The coax used in that example is both for phasing and
impedance transformation in one, though requires 100 ohm (or close to
that) coax (which last time I checked was available at the RF
connection, who can also fabricate properly phase calibrated cables for
you). Also the relay in that example was not at the feedpoint of the
antenna. So it does exactly the opposite of what you are trying to do
(antennas are not offset, and you need phasing/impedance transformation
lines) but in my experience I found it easier than trying to crack open
a (potentially expensive) coax relay and integrate it into a feedpoint
(I left that to the pros at M2 Antennas).
Good Luck!
73s,
Zach, KJ4QLP
Research Associate
Aerospace Systems Lab
Ted & Karyn Hume Center for National Security & Technology
Virginia Polytechnic Institute & State University
Work Phone: 540-231-4174
Cell Phone: 540-808-6305
On 4/12/2017 6:51 PM, Richard Tejera wrote:
> Brady,
>
> Domenici, I8cvs SK had published a pair of articles on making a switching
relay between vertical, Horizontal, LHCP & RHCP. he sent me PDF's, which are
in my to do someday folder.
>
> Contact me off list (email is good on QRZ), and I will send them to you.
They are for 70cm, but certainly can be adapted for 2m easily enough.
>
> Rick Tejera K7TEJ
> Saguaro Astronomy Club
> www.SaguaroAstro.org
> Thunderbird Amateur Radio Club
> www.w7tbc.org
>
> On April 12, 2017, at 14:11, Brady Gordon <ac0xr@xxxxxx.xxx> wrote:
>
> Hi Everyone,
>
> I'm working on building a pair of crossed yagis for 2m and 70cm, and I have
> some questions. I apologize if this has been discussed before, but I
> couldn't find answers online so I was hoping you all could help me out.
>
> First, it seems easiest to me to build an antenna system that can either
> switch between vertical and horizontal linear polarizations, or between
> right hand and left hand circular polarization. Which would be more
> useful? And is it worth the extra effort to build an antenna system that
> can switch between all four polarizations?
>
> Also, I've been looking at the different ways of achieving circular
> polarization. I like the idea of using mechanical 1/4 wave separation
> between the two yagis so I don't have to cut phasing lines. Would it be
> possible to switch polarizations by putting a relay at the feedpoint of one
> of the yagis and switching which side of the driven element the center
> conductor and shield of the coax goes to? I've never seen this done
> before, but it seems to me it would work. Any thoughts?
>
> Thanks and 73,
> Brady AC0XR
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 9
Date: Wed, 12 Apr 2017 19:09:23 -0700
From: Scott <ka7fvv@xxxxx.xxx>
To: Armand SP3QFE <kontakt@xxxxxx.xxx>
Cc: amsat-bb@xxxxx.xxxx Paul Ecker <eckerpw@xxxxx.xxx>
Subject: Re: [amsat-bb] Orbitron Question
Message-ID: <E27BBF59-6760-4C90-A575-F7281E02CC80@xxxxx.xxx>
Content-Type: text/plain; charset=utf-8
Another feature that is very handy in Orbitron is the ability to select and
use more that one element set by holding Crtl down while selecting sets of
elements. Also I have added the NASALL set from the Amsat page to my list.
You won't find AO-85 in the amateur or cubesat set so the NASA set fixes
that issue.
73, Scott, KA7FVV
President - KBARA www.kbara.org
Co-Owner 443.525 System Fusion Repeater
ka7fvv.net
> On Apr 12, 2017, at 01:51, Armand SP3QFE <kontakt@xxxxxx.xxx> wrote:
>
> Hi Paul,
>
> TLE data about the amateur satellites are in file: amateur.txt
>
> Click on the button "Load TLE" or use Left ALT + L then select file:
amateur.txt
>
> On the right side you will see list of satellites connected with HAM
radio. You can select items that are interesting for you (check the square).
>
> In a case, when you want to follow a lunch of new satellites (CubeSat?s),
then you can use also tle-new.txt (instead of amateur.txt). There will
temporary names (not real names of satelites).
> When CubeSat?s are recognized in the sky and confirmed their position,
then items with "right name" should appear in amateur.txt file.
>
> 73, Armand SP3QFE
>
>
>> On 2017-04-11 16:18, Paul Ecker wrote:
>> I read about Orbitron on this list, never have used but just downloaded. Is
>> there a way to have it just list the amateur satellites?
>> Paul
>> kc2nyu
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 10
Date: Wed, 12 Apr 2017 19:24:31 -0400
From: jeffory broughton <jefforybroughton@xxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Vhf sat ants for sale
Message-ID:
<CACm2je3tBhVVi=irrqT1CZypwoBMKZDBvjVxDNE5qO8K8yUOTg@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
One has the phasing Harness for rhcp,
The other does not,is is set up for two feedlines,one for horiz,one for
vert.
Both Cushcraft A144-20T.ONE LIKE BRAND NEW $100 ,ONE NOT SO NEW $80 .BOTH
PLUS SHIPPING.
jeff broughton
------------------------------
Message: 11
Date: Thu, 13 Apr 2017 12:06:55 +0100
From: "Jim Heck G3WGM" <jimlist@xxxx.xxx>
To: <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] AO-73/FUNcube Mode switch
Message-ID: <9FEB9308451F4BF6B49AE43E026DBDC0@xxxxxx>
Content-Type: text/plain; format=flowed; charset="UTF-8";
reply-type=original
Hi Folks,
Just to let you know that I have just switched AO-73/FUNcube from
Educational mode to continuous Amateur Mode, with the transponder on 24/7.
Early this weekend partly because of the Easter Holiday, and party due to
Ground Station Availability.
The plan is to revert back to normal Educational Mode after the Holiday
either on Mon pm, and Tue am, UTC.
Enjoy the transponder, and happy holidays!
73s Jim G3WGM and the FUNcube Team
++++++++++++++++++++++++++++++++++
FUNcube frequencies and other details
++++++++++++++++++++++++++++++++++
AO-73 FUNcube-1
The transponder is normally operational only when the satellite is in
eclipse, ie the solar panels are NOT being illuminated. During weekends
(from pm Fridays UTC to PM Sundays UTC) the transponder is operational 24/7.
When the transponder is switched off, the telemetry beacon is on full power,
when the transponder is on the beacon it is on low power. During holidays,
eg Christmas, New Year, Easter, etc, the transponder maybe activated for
extended periods. Watch AMSAT-BB for announcements which are usually made on
Friday evenings (UTC)
The nominal transponder frequencies are:
Uplink: 435.150 - 435.130 MHz LSB (Inverting)
Downlink: 145.950 - 145.970 MHz USB
Telemetry Tx: 145.935 MHz BPSK
(The passband may be up to 15kHz higher depending on on-board temps. Low
temperatures give higher freqs!)
FUNcube-2 aka FUNcube on UKube
The FUNcube-2 sub-system continues to operate autonomously and, almost
continuously, in amateur mode. The transponder is operational and the
telemetry downlink is functioning with about 70mW output. The FUNcube-1
Dashboard does not correctly display the telemetry but it does correctly
decode the data and uploads it to the FUNcube Data Warehouse from where it
can be examined. Most of the real time data channels are operational and
these include battery voltages, temperatures and ADCS data coming via the
main On Board Computer (OBC).
The transponder is interrupted for a few seconds every 2 minutes when the
other transmitter sends its CW beacon and, occasionally, for a few seconds
when the main OBC reboots (approx seven times each orbit).
The nominal transponder frequencies are:
Uplink: 435.080 - 435.060 MHz LSB (Inverting)
Downlink: 145.930 - 145.950 MHz USB
Telemetry Tx: 145.915 MHz BPSK
(The passband may be up to 10kHz higher depending on on-board temps. Low
temperatures give higher freqs!)
EO79 FUNcube-3
Due to power budget constraints the transponder cannot be operational 24/7
and an orbit specific schedule has been developed. The transponder will
commence operation 27 minutes after the spacecraft enters sunlight and will
stay on for a period of 25 minutes. This schedule may be modified in future
months as a result of experience.
The nominal transponder frequencies are:
Uplink: 435.0723-435.0473 MHz LSB (Inverting)
Downlink: 145.946-145.971 MHz USB
Further detailed info on EO79 transponder frequencies is at:
https://amsat-uk.org/2016/11/10/eo79-funcube-3-transponder-commences-regular-
operation/EO88 Nayif-1 FUNcube-5EO88 is presently operating in autonomous
mode. The transponder isoperational when the satellite is in eclipse, ie the
solar panels are NOTbeing illuminated.When the transponder is switched off,
the telemetry beacon is on full power,when the transponder is on the beacon
it is on low power.The transponder frequencies are:Uplink: 435.045 ?
435.015 MHz LSB (inverting)Downlink: 145.960-145.990 MHz USBTelemetry Tx:
145.940MHzAll FUNcube transponders are sponsored by AMSAT-UK and AMSAT-NL.
We are verygrateful for the assistance given by Innovative Solution In Space
Bv, TheNetherlands.
------------------------------
Message: 12
Date: Thu, 13 Apr 2017 08:54:30 -0500
From: willmarbrowns@xxxxxxx.xxx
To: "'amsat-bb@xxxxx.xxxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] funcube dongle
Message-ID: <7puW1v00N2gZ11w01puXqX@xxxxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
looking to buy a funcube pro+...any one willing to part with?bruce
ke0lx
------------------------------
Message: 13
Date: Thu, 13 Apr 2017 10:32:39 -0500
From: Clayton Coleman <kayakfishtx@xxxxx.xxx>
To: AMSAT-BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] W5PFG/P FM02 South Carolina
Message-ID:
<CAPovOwdfr0NdacyA_hL3HadiB6POFnLb0KqrGh00MfUbg+oB1g@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
I will be operating satellites from the Charleston, South Carolina
area in gridsquare FM02 between April 23-28.
During my FM02 stay, I plan to activate nearby FM03, EM92, and EM93
grids. Follow me on Twitter for pass updates: @xxxxx
http://www.twitter.com/w5pfg
I am available to make limited schedules with European and South
American stations interested in confirming the grid FM02. Contact me
via direct reply to this email.
73
Clayton
W5PFG
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@xxxxx.xxx.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 12, Issue 96
****************************************
Read previous mail | Read next mail
| |
