OpenBCM V1.07b12 (Linux)

Packet Radio Mailbox

IW8PGT

[Mendicino(CS)-Italy]

 Login: GUEST





  
CX2SA  > SATDIG   08.06.17 01:11l 1007 Lines 30585 Bytes #999 (0) @ WW
BID : AMSATBB12142
Read: GUEST
Subj: AMSAT-BB-digest V12 142
Path: IW8PGT<IV3ONZ<IZ3LSV<DB0ERF<OK0NAG<OK0NBR<F3KT<CX2SA
Sent: 170607/2303Z @:CX2SA.SAL.URY.SOAM #:9538 [Salto] FBB7.00e $:AMSATBB12142
From: CX2SA@CX2SA.SAL.URY.SOAM
To  : SATDIG@WW

Today's Topics:

   1. Is this common? Better audio w/ delay before speaking? (Scott)
   2. DTUSAT-2 (Perry Yantis)
   3. Yaesu g5500 cable connector (Matthew Stevens)
   4. Re: Yaesu g5500 cable connector (Jim Jerzycke)
   5. Re: Yaesu g5500 cable connector (W3AB/GEO)
   6. Re: Yaesu g5500 cable connector (Dave Webb KB1PVH)
   7. Re: Yaesu g5500 cable connector (Matthew Stevens)
   8. Re: Yaesu g5500 cable connector (GEO Badger)
   9. Re: Dimensions of AO-13 (Michael R. Lengruesser)
  10. Re: Yaesu g5500 cable connector (Jeff Moore)
  11. Re: Yaesu g5500 cable connector (GEO Badger)
  12. Re: Dimensions of AO-13 (Robert Bruninga)
  13. Re: Yaesu g5500 cable connector (GEO Badger)


----------------------------------------------------------------------

Message: 1
Date: Wed, 7 Jun 2017 00:55:00 -0400
From: Scott <scott23192@xxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Is this common? Better audio w/ delay before
speaking?
Message-ID:
<CAJCSnOZxJ=CBprnzOh+ebxBu30ggUm07-xUSjVccDfqXSju3cA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"

Hey everybody!

I had a very high pass of LilacSat-1 tonight and took the opportunity to
try to see how I could improve the percentage of my transmissions that the
satellite would digitize & repeat onto the downlink.

Wei from the project team at Harbin was kind enough to call to my attention
that there should be a short delay ("a few hundred ms") before speaking so
that the CTCSS decode could process.  Following that period, the audio on
the uplink would be passed on to the satellite's receiver.

As I tested various techniques while transmitting tonight, it became pretty
obvious that I was getting MUCH better audio on the downlink with a full
2-second delay before speaking when I keyed the mic.

I was just wondering if anything like this had been seen on other
satellites over the years. (or land-based systems, for that matter)

I realize that we're treading on new ground with this satellite processing
the uplink audio with an on-board computer for transmission as a data
stream on the downlink, but the front-end is still dealing with a standard
FM carrier and PL, so I was curious if a longer-than-expected delay had
possibly been seen elsewhere over the years.

Just trying to learn as I go.  Thanks for any feedback.

Here's a sample of the quality of downlink I was seeing with that 2-second
delay:

http://www.qsl.net/k4kdr/files/2017-06-07--0334--LilacSat-1--audio.mp3


-Scott,  K4KDR


------------------------------

Message: 2
Date: Wed, 7 Jun 2017 10:53:59 +0000 (UTC)
From: Perry Yantis <py41@xxx.xxx>
Subject: [amsat-bb] DTUSAT-2
Message-ID: <1709201322.4904967.1496832839421@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8

I was wondering if this satellite is still working?I haven't used my 1269 up
or 2401 equipment for years and would like to see if it still works.
?Perry WB8OTH

py41@xxx.xxx
sent from my Apple Macbook Pro

------------------------------

Message: 3
Date: Wed, 7 Jun 2017 15:32:59 -0400
From: Matthew Stevens <matthew@xxxxxxxxx.xxx>
To: "Keith O'Brien via AMSAT-BB" <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Yaesu g5500 cable connector
Message-ID:
<CAN8zKtTqZAsZ0pjj5G6Dc3H+c=hn8uvF8_Th9_M4eUmXhp_CYQ@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"

Has anyone tried using these on the control cables for a G5500?

http://www.mouser.com/Search/ProductDetail.aspx?R=JR16WP-7S(71)virtualkey64550
000virtualkey798-JR16WP7S71

73,

- Matthew
? kk4fem?


------------------------------

Message: 4
Date: Wed, 7 Jun 2017 19:56:47 +0000
From: Jim Jerzycke <kq6ea@xxxxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] Yaesu g5500 cable connector
Message-ID: <b47bfae6-da12-6d1f-a9c0-cd547f410f76@xxxxxxx.xxx>
Content-Type: text/plain; charset=utf-8; format=flowed

I just use some six-pin "Jones" connectors and seal them up with the
nonadhesive silicone self-fusing tape.


I don't think all four I used cost as much as one of those Hirose
connectors....


73, Jim  KQ6EA


On 06/07/2017 07:32 PM, Matthew Stevens wrote:
> Has anyone tried using these on the control cables for a G5500?
>
>
http://www.mouser.com/Search/ProductDetail.aspx?R=JR16WP-7S(71)virtualkey64550
000virtualkey798-JR16WP7S71
>
> 73,
>
> - Matthew
> ? kk4fem?
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb



------------------------------

Message: 5
Date: Wed, 07 Jun 2017 12:58:07 -0700
From: W3AB/GEO <w3ab@xxxxx.xxx>
To: Matthew Stevens <matthew@xxxxxxxxx.xxx>
Cc: Keith O'Brien via AMSAT-BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Yaesu g5500 cable connector
Message-ID: <f6567013-9655-4c99-99b8-5ffc54b9ad2f@xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8

I use DB-9 connectors in the shack between my rotor controll boxes and the
rotor.

?___
Sent from my two way wrist watch
73 de W3AB/GEO?

On Jun 7, 2017, 12:34, at 12:34, Matthew Stevens <matthew@xxxxxxxxx.xxx>
wrote:
>Has anyone tried using these on the control cables for a G5500?
>
>http://www.mouser.com/Search/ProductDetail.aspx?R=JR16WP-7S(71)virtualkey6455
0000virtualkey798-JR16WP7S71
>
>73,
>
>- Matthew
>? kk4fem?
>_______________________________________________
>Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
>to all interested persons worldwide without requiring membership.
>Opinions expressed
>are solely those of the author, and do not reflect the official views
>of AMSAT-NA.
>Not an AMSAT-NA member? Join now to support the amateur satellite
>program!
>Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb


------------------------------

Message: 6
Date: Wed, 7 Jun 2017 16:01:37 -0400
From: Dave Webb KB1PVH <kb1pvh@xxxxx.xxx>
To: "W3AB/GEO" <w3ab@xxxxx.xxx>
Cc: AMSAT -BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Yaesu g5500 cable connector
Message-ID:
<CAEMY9FfqhWYGpxMb_TpmeTcaBHqHKKYtMQOL-PKBYdfarmy4TA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"

I'm pretty sure what he's looking for are the connectors that connect the
control cable to the actual rotor.

Dave-KB1PVH


Sent from my Galaxy S7

On Jun 7, 2017 4:00 PM, "W3AB/GEO via AMSAT-BB" <amsat-bb@xxxxx.xxx> wrote:

> I use DB-9 connectors in the shack between my rotor controll boxes and the
> rotor.
>
> ?___
> Sent from my two way wrist watch
> 73 de W3AB/GEO?
>
> On Jun 7, 2017, 12:34, at 12:34, Matthew Stevens <matthew@xxxxxxxxx.xxx>
> wrote:
> >Has anyone tried using these on the control cables for a G5500?
> >
> >http://www.mouser.com/Search/ProductDetail.aspx?R=JR16WP-7S(71)
> virtualkey64550000virtualkey798-JR16WP7S71
> >
> >73,
> >
> >- Matthew
> >? kk4fem?
> >_______________________________________________
> >Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> >to all interested persons worldwide without requiring membership.
> >Opinions expressed
> >are solely those of the author, and do not reflect the official views
> >of AMSAT-NA.
> >Not an AMSAT-NA member? Join now to support the amateur satellite
> >program!
> >Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>


------------------------------

Message: 7
Date: Wed, 7 Jun 2017 16:08:54 -0400
From: Matthew Stevens <matthew@xxxxxxxxx.xxx>
To: Dave Webb KB1PVH <kb1pvh@xxxxx.xxx>
Cc: AMSAT -BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Yaesu g5500 cable connector
Message-ID: <8E382B75-EF52-4A0B-978C-AA6435821895@xxxxxxxxx.xxx>
Content-Type: text/plain;	charset=utf-8

Yep, dave is right :-)

I use jones plugs for a control line disconnect on my HF rotor so am
familiar with those.

I have a g5500 that I am repairing, but am missing the 7 pin weatherproof
connector pigtail that is included with a new unit. I need  to find 2 plugs
from somewhere to connect the control box to the rotors. Thus far I haven't
located anywhere to buy the Yaesu part so was looking at some alternatives.

- Matthew kk4fem

Sent from my iPhone

> On Jun 7, 2017, at 16:01, Dave Webb KB1PVH <kb1pvh@xxxxx.xxx> wrote:
>
> I'm pretty sure what he's looking for are the connectors that connect the
control cable to the actual rotor.
>
> Dave-KB1PVH
>
>
> Sent from my Galaxy S7
>
>> On Jun 7, 2017 4:00 PM, "W3AB/GEO via AMSAT-BB" <amsat-bb@xxxxx.xxx> wrote:
>> I use DB-9 connectors in the shack between my rotor controll boxes and
the rotor.
>>
>> ?___
>> Sent from my two way wrist watch
>> 73 de W3AB/GEO?
>>
>> On Jun 7, 2017, 12:34, at 12:34, Matthew Stevens <matthew@xxxxxxxxx.xxx>
wrote:
>> >Has anyone tried using these on the control cables for a G5500?
>> >
>>
>http://www.mouser.com/Search/ProductDetail.aspx?R=JR16WP-7S(71)virtualkey6455
0000virtualkey798-JR16WP7S71
>> >
>> >73,
>> >
>> >- Matthew
>> >? kk4fem?
>> >_______________________________________________
>> >Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
>> >to all interested persons worldwide without requiring membership.
>> >Opinions expressed
>> >are solely those of the author, and do not reflect the official views
>> >of AMSAT-NA.
>> >Not an AMSAT-NA member? Join now to support the amateur satellite
>> >program!
>> >Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>> _______________________________________________
>> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
Opinions expressed
>> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb


------------------------------

Message: 8
Date: Wed, 7 Jun 2017 20:43:09 +0000 (UTC)
From: GEO Badger <w3ab@xxxxx.xxx>
To: Dave Webb KB1PVH <kb1pvh@xxxxx.xxx>
Cc: AMSAT -BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Yaesu g5500 cable connector
Message-ID: <146691041.5519164.1496868189277@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8

Available from Yaesu and?here, and?here
?---?
 Ciao baby, catch you on the flip side. ??
 GEO ???

 http://www.w3ab.org

Time flies like an arrow, fruit flies like a banana.

      From: Dave Webb KB1PVH <kb1pvh@xxxxx.xxx>
 To: W3AB/GEO <w3ab@xxxxx.xxx>
Cc: AMSAT -BB <amsat-bb@xxxxx.xxx>; Matthew Stevens <matthew@xxxxxxxxx.xxx>
 Sent: Wednesday, June 7, 2017 1:01 PM
 Subject: Re: [amsat-bb] Yaesu g5500 cable connector

I'm pretty sure what he's looking for are the connectors that connect the
control cable to the actual rotor.

Dave-KB1PVH


Sent from my Galaxy S7
On Jun 7, 2017 4:00 PM, "W3AB/GEO via AMSAT-BB" <amsat-bb@xxxxx.xxx> wrote:

I use DB-9 connectors in the shack between my rotor controll boxes and the
rotor.

?___
Sent from my two way wrist watch
73 de W3AB/GEO?

On Jun 7, 2017, 12:34, at 12:34, Matthew Stevens <matthew@xxxxxxxxx.xxx>
wrote:
>Has anyone tried using these on the control cables for a G5500?
>
>http://www.mouser.com/Search/ ProductDetail.aspx?R=JR16WP- 7S(71)
virtualkey64550000virtualkey79 8-JR16WP7S71
>
>73,
>
>- Matthew
>? kk4fem?
>_____________________________ __________________
>Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
>to all interested persons worldwide without requiring membership.
>Opinions expressed
>are solely those of the author, and do not reflect the official views
>of AMSAT-NA.
>Not an AMSAT-NA member? Join now to support the amateur satellite
>program!
>Subscription settings: http://www.amsat.org/mailman/ listinfo/amsat-bb
______________________________ _________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/ listinfo/amsat-bb





------------------------------

Message: 9
Date: Wed, 7 Jun 2017 23:14:34 +0200
From: "Michael R. Lengruesser" <mlengruesser@xxxxxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] Dimensions of AO-13
Message-ID: <b44b5f5d-1ddc-13f5-4d0f-55eedc43ea95@xxxxxxxx.xxx>
Content-Type: text/plain; charset=windows-1252

All measurements in mm
nearly the same data for P3 A,B,C, and E ( AO 10, 13,)
depence on antennae and rocket motor


Michael, DD5ER
AMSAT-DL e.V.

-- International Satellites for
Communication, Science and Education --

mlengruesser@xxxxxxxx.xxx
http:/www.amsat-dl.org

Am 06. Jun. 2017 um 08:40 schrieb Michael R. Lengruesser:
> All measurements in mm
> Nearly the same data for P3 A,B,C, and E ( AO 10, 13,)
> depence on antennae and rocket motor
>
>
> https://www.dropbox.com/sh/bfhas168it863ry/AACZa30Eq49o_YUSK140NGb9a?dl=0
>
> Michael R. Lengruesser, DD5ER
>
> AMSAT-DL e.V.
>
> -- International Satellites for
> Communication, Science and Education --
>
> mlengruesser@xxxxxxxx.xxx
> http:/www.amsat-dl.org
>
> Am 04. Jun. 2017 um 19:13 schrieb Stewart Todd Morgan:
>> See "Spotlight On:  AMSAT-OSCAR-13" by John A. Magliacane, KD2BD:
>>
>>
https://web.archive.org/web/19961028042702/http://amsat.org:80/amsat/sats/n7hp
r/ao13_kd2.html
>>
>>
>> Todd
>> AL0I
>> _______________________________________________
>> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>


------------------------------

Message: 10
Date: Wed, 7 Jun 2017 14:42:52 -0700
From: Jeff Moore <tnetcenter@xxxxx.xxx>
To: GEO Badger <w3ab@xxxxx.xxx>, Amsat BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Yaesu g5500 cable connector
Message-ID:
<CALx_moRga_Ar_+4nkn06c635UmzLkzsoBda6EtPhh-_2sgwRDg@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"

Did you provide URL's??   They didn't make it past the listserver if that
far!  Please fill in the blanks!

Thank you!

Jeff Moore  --  KE7ACY


On Wed, Jun 7, 2017 at 1:43 PM, GEO Badger via AMSAT-BB <amsat-bb@xxxxx.xxx>
wrote:

> Available from Yaesu and here, and here
>  ---
>  Ciao baby, catch you on the flip side.
>  GEO
>
>  http://www.w3ab.org
>
> Time flies like an arrow, fruit flies like a banana.
>
>       From: Dave Webb KB1PVH <kb1pvh@xxxxx.xxx>
>  To: W3AB/GEO <w3ab@xxxxx.xxx>
> Cc: AMSAT -BB <amsat-bb@xxxxx.xxx>; Matthew Stevens <matthew@xxxxxxxxx.xxx
> >
>  Sent: Wednesday, June 7, 2017 1:01 PM
>  Subject: Re: [amsat-bb] Yaesu g5500 cable connector
>
> I'm pretty sure what he's looking for are the connectors that connect the
> control cable to the actual rotor.
>
> Dave-KB1PVH
>
>
> Sent from my Galaxy S7
> On Jun 7, 2017 4:00 PM, "W3AB/GEO via AMSAT-BB" <amsat-bb@xxxxx.xxx>
> wrote:
>
> I use DB-9 connectors in the shack between my rotor controll boxes and the
> rotor.
>
> ?___
> Sent from my two way wrist watch
> 73 de W3AB/GEO?
>
> On Jun 7, 2017, 12:34, at 12:34, Matthew Stevens <matthew@xxxxxxxxx.xxx>
> wrote:
> >Has anyone tried using these on the control cables for a G5500?
> >
> >http://www.mouser.com/Search/ ProductDetail.aspx?R=JR16WP- 7S(71)
> virtualkey64550000virtualkey79 8-JR16WP7S71
> >
> >73,
> >
> >- Matthew
> >? kk4fem?
> >_____________________________ __________________
> >Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> >to all interested persons worldwide without requiring membership.
> >Opinions expressed
> >are solely those of the author, and do not reflect the official views
> >of AMSAT-NA.
> >Not an AMSAT-NA member? Join now to support the amateur satellite
> >program!
> >Subscription settings: http://www.amsat.org/mailman/ listinfo/amsat-bb
> ______________________________ _________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/ listinfo/amsat-bb
>
>
>
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>


------------------------------

Message: 11
Date: Wed, 7 Jun 2017 22:50:04 +0000 (UTC)
From: GEO Badger <w3ab@xxxxx.xxx>
To: Jeff Moore <tnetcenter@xxxxx.xxx>, Amsat BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Yaesu g5500 cable connector
Message-ID: <181790282.5578880.1496875804076@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8

Too funny
W3FRGYaesu Antenna Rotor Connectors


|
|
|
|   |    |

   |

  |
|
|   |
Yaesu Antenna Rotor Connectors
 Yaesu Rotor & Controller replacement cable connectors for models: G-450A,
650A, 800A, SA, DXA, 1000A, SA, DX...  |   |

  |

  |


Second hand radio parts. The $6 is not for the 7 pin rotor conn.Yaesu Rotor
Connector For Sale $6.00?

|
|   |
Yaesu Rotor Connector For Sale $6.00
 Yaesu Rotor Connector For SaleReplacement OEM cable connectors for Yaesu
Antenna Rotors Controllers. Yaesu mo...  |  |

  |


Let's see if these go through
---?
 Ciao baby, catch you on the flip side. ??
 GEO ???

 http://www.w3ab.org

Time flies like an arrow, fruit flies like a banana.

      From: Jeff Moore <tnetcenter@xxxxx.xxx>
 To: GEO Badger <w3ab@xxxxx.xxx>; Amsat BB <amsat-bb@xxxxx.xxx>
 Sent: Wednesday, June 7, 2017 2:42 PM
 Subject: Re: [amsat-bb] Yaesu g5500 cable connector

Did you provide URL's???? They didn't make it past the listserver if that
far!? Please fill in the blanks!

Thank you!

Jeff Moore? --? KE7ACY


On Wed, Jun 7, 2017 at 1:43 PM, GEO Badger via AMSAT-BB <amsat-bb@xxxxx.xxx>
wrote:

Available from Yaesu and?here, and?here
?---?
?Ciao baby, catch you on the flip side. ??
?GEO ???

?http://www.w3ab.org

Time flies like an arrow, fruit flies like a banana.

? ? ? From: Dave Webb KB1PVH <kb1pvh@xxxxx.xxx>
?To: W3AB/GEO <w3ab@xxxxx.xxx>
Cc: AMSAT -BB <amsat-bb@xxxxx.xxx>; Matthew Stevens <matthew@xxxxxxxxx.xxx>
?Sent: Wednesday, June 7, 2017 1:01 PM
?Subject: Re: [amsat-bb] Yaesu g5500 cable connector

I'm pretty sure what he's looking for are the connectors that connect the
control cable to the actual rotor.

Dave-KB1PVH


Sent from my Galaxy S7
On Jun 7, 2017 4:00 PM, "W3AB/GEO via AMSAT-BB" <amsat-bb@xxxxx.xxx> wrote:

I use DB-9 connectors in the shack between my rotor controll boxes and the
rotor.

?___
Sent from my two way wrist watch
73 de W3AB/GEO?

On Jun 7, 2017, 12:34, at 12:34, Matthew Stevens <matthew@xxxxxxxxx.xxx>
wrote:
>Has anyone tried using these on the control cables for a G5500?
>
>http://www.mouser.com/Search/ ProductDetail.aspx?R=JR16WP- 7S(71)
virtualkey64550000virtualkey79 8-JR16WP7S71
>
>73,
>
>- Matthew
>? kk4fem?
>_____________________________ __________________
>Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
>to all interested persons worldwide without requiring membership.
>Opinions expressed
>are solely those of the author, and do not reflect the official views
>of AMSAT-NA.
>Not an AMSAT-NA member? Join now to support the amateur satellite
>program!
>Subscription settings: http://www.amsat.org/mailman/ listinfo/amsat-bb
______________________________ _________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/ listinfo/amsat-bb




______________________________ _________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/ listinfo/amsat-bb






------------------------------

Message: 12
Date: Wed, 7 Jun 2017 18:50:07 -0400
From: Robert Bruninga <bruninga@xxxx.xxx>
To: mlengruesser@xxxxxxxx.xxxx amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] Dimensions of AO-13
Message-ID: <539f0c7f7a28db796401f47dcba8c40c@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"

Unless I missed something, this still does not answer the question.  The
value of 40 mm is *not* a major dimension of the P3 frame.  Neither is
40cm.

The question was these dimensions, 600 x 40 x 200.  They don't make sense
in mm...

Please advise. Or at least if you are going to say "all dimensinos are in
mm" please tell us *what* dimensions are being talked about?  This thread
all has to do with the dimensions qquoted above.

Bob, WB4aPR

-----Original Message-----
From: AMSAT-BB [mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of Michael R.
Lengruesser
Sent: Wednesday, June 07, 2017 5:15 PM
To: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] Dimensions of AO-13

All measurements in mm
nearly the same data for P3 A,B,C, and E ( AO 10, 13,) depence on antennae
and rocket motor


Michael, DD5ER
AMSAT-DL e.V.

-- International Satellites for
Communication, Science and Education --

mlengruesser@xxxxxxxx.xxx
http:/www.amsat-dl.org

Am 06. Jun. 2017 um 08:40 schrieb Michael R. Lengruesser:
> All measurements in mm
> Nearly the same data for P3 A,B,C, and E ( AO 10, 13,) depence on
> antennae and rocket motor
>
>
> https://www.dropbox.com/sh/bfhas168it863ry/AACZa30Eq49o_YUSK140NGb9a?d
> l=0
>
> Michael R. Lengruesser, DD5ER
>
> AMSAT-DL e.V.
>
> -- International Satellites for
> Communication, Science and Education --
>
> mlengruesser@xxxxxxxx.xxx
> http:/www.amsat-dl.org
>
> Am 04. Jun. 2017 um 19:13 schrieb Stewart Todd Morgan:
>> See "Spotlight On:  AMSAT-OSCAR-13" by John A. Magliacane, KD2BD:
>>
>> https://web.archive.org/web/19961028042702/http://amsat.org:80/amsat/
>> sats/n7hpr/ao13_kd2.html
>>
>>
>> Todd
>> AL0I
>> _______________________________________________
>> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views
>> of AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite
program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership.
> Opinions expressed are solely those of the author, and do not reflect
the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite
program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available to
all interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb


------------------------------

Message: 13
Date: Wed, 7 Jun 2017 22:56:56 +0000 (UTC)
From: GEO Badger <w3ab@xxxxx.xxx>
To: GEO Badger <w3ab@xxxxx.xxx>, Jeff Moore <tnetcenter@xxxxx.xxx>,
Amsat BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Yaesu g5500 cable connector
Message-ID: <1560263312.5599248.1496876216116@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8

Didn't like those either.
Google 7 pin rotor connector
worldwidedx dot com and chase the threads
secondhandradio dot com?---?
 Ciao baby, catch you on the flip side. ??
 GEO ???

 http://www.w3ab.org

Time flies like an arrow, fruit flies like a banana.

      From: GEO Badger via AMSAT-BB <amsat-bb@xxxxx.xxx>
 To: Jeff Moore <tnetcenter@xxxxx.xxx>; Amsat BB <amsat-bb@xxxxx.xxx>
 Sent: Wednesday, June 7, 2017 3:52 PM
 Subject: Re: [amsat-bb] Yaesu g5500 cable connector

Too funny
W3FRGYaesu Antenna Rotor Connectors

?
|?
|?
|?
|? |? ? |

? |

? |
|?
|? |?
Yaesu Antenna Rotor Connectors
 Yaesu Rotor & Controller replacement cable connectors for models: G-450A,
650A, 800A, SA, DXA, 1000A, SA, DX...? |? |

? |

? |


Second hand radio parts. The $6 is not for the 7 pin rotor conn.Yaesu Rotor
Connector For Sale $6.00?
?
|?
|? |?
Yaesu Rotor Connector For Sale $6.00
 Yaesu Rotor Connector For SaleReplacement OEM cable connectors for Yaesu
Antenna Rotors Controllers. Yaesu mo...? |? |

? |


Let's see if these go through
---?
 Ciao baby, catch you on the flip side. ??
 GEO ???

 http://www.w3ab.org

Time flies like an arrow, fruit flies like a banana.

? ? ? From: Jeff Moore <tnetcenter@xxxxx.xxx>
 To: GEO Badger <w3ab@xxxxx.xxx>; Amsat BB <amsat-bb@xxxxx.xxx>
 Sent: Wednesday, June 7, 2017 2:42 PM
 Subject: Re: [amsat-bb] Yaesu g5500 cable connector
?
Did you provide URL's???? They didn't make it past the listserver if that
far!? Please fill in the blanks!

Thank you!

Jeff Moore? --? KE7ACY


On Wed, Jun 7, 2017 at 1:43 PM, GEO Badger via AMSAT-BB <amsat-bb@xxxxx.xxx>
wrote:

Available from Yaesu and?here, and?here
?---?
?Ciao baby, catch you on the flip side. ??
?GEO ???

?http://www.w3ab.org

Time flies like an arrow, fruit flies like a banana.

? ? ? From: Dave Webb KB1PVH <kb1pvh@xxxxx.xxx>
?To: W3AB/GEO <w3ab@xxxxx.xxx>
Cc: AMSAT -BB <amsat-bb@xxxxx.xxx>; Matthew Stevens <matthew@xxxxxxxxx.xxx>
?Sent: Wednesday, June 7, 2017 1:01 PM
?Subject: Re: [amsat-bb] Yaesu g5500 cable connector

I'm pretty sure what he's looking for are the connectors that connect the
control cable to the actual rotor.

Dave-KB1PVH


Sent from my Galaxy S7
On Jun 7, 2017 4:00 PM, "W3AB/GEO via AMSAT-BB" <amsat-bb@xxxxx.xxx> wrote:

I use DB-9 connectors in the shack between my rotor controll boxes and the
rotor.

?___
Sent from my two way wrist watch
73 de W3AB/GEO?

On Jun 7, 2017, 12:34, at 12:34, Matthew Stevens <matthew@xxxxxxxxx.xxx>
wrote:
>Has anyone tried using these on the control cables for a G5500?
>
>http://www.mouser.com/Search/ ProductDetail.aspx?R=JR16WP- 7S(71)
virtualkey64550000virtualkey79 8-JR16WP7S71
>
>73,
>
>- Matthew
>? kk4fem?
>_____________________________ __________________
>Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
>to all interested persons worldwide without requiring membership.
>Opinions expressed
>are solely those of the author, and do not reflect the official views
>of AMSAT-NA.
>Not an AMSAT-NA member? Join now to support the amateur satellite
>program!
>Subscription settings: http://www.amsat.org/mailman/ listinfo/amsat-bb
______________________________ _________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/ listinfo/amsat-bb




______________________________ _________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/ listinfo/amsat-bb




?
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb




------------------------------

Subject: Digest Footer

_______________________________________________
Sent via amsat-bb@xxxxx.xxx.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership.  Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb

------------------------------

End of AMSAT-BB Digest, Vol 12, Issue 142
*****************************************


Read previous mail | Read next mail


 11.05.2024 17:07:22lGo back Go up