| |
K5GEO > BPQ32 30.09.23 16:02l 86 Lines 2059 Bytes #76 (0) @ WW
BID : 7820_K5GEO
Read: GUEST
Subj: Re:APRS iGate
Path: IW8PGT<I3XTY<IZ3LSV<IW0QNL<ON0AR<OZ5BBS<CX2SA<PE1RRR<K5GEO
Sent: 230930/1237Z 7820@K5GEO.K5GE0.NM.USA.NOAM BPQK6.0.23
I do not see the Digimap command in your config. i.e.,
Digimap 1=1,IS
You need this to direct port 1 aprs data to IS
73! de K5GEO
Original Message
>
> I see that you are missing the "digimap" command for mapping from port to IS:
>
> Digimap 1=1,IS
>
> 73!
>
> K5GEO
>
>
>
>
> Original Message
>
> > R:230930/1020Z 15657@PE1RRR.#NBW.NLD.EURO LinBPQ6.0.24
> > R:230930/1020Z 132@KC3SMW.#EPA.PA.USA.NOAM LinBPQ6.0.24
> > R:230930/1118Z @:PI8ZTM.#ZH1.NLD.EURO #:28527 [Zoetermeer] FBB7.00i
> > R:230930/1015Z @:PD2SKZ-3.#ZH1.NLD.EURO #:1895 [Pijnacker] $:1895_PD2SKZ
> >
> > From: PD2SKZ@PD2SKZ-3.#ZH1.NLD.EURO
> > To : BPQ32@WW
> >
> > Hi all,
> >
> > im trying to setup an iGate with BPQ. Everything seems to be working fine. Except that when i receive a station vis RF, it doesnt get reported to the aprs2.net server.
> >
> > Here is my config:
> >
> > APRSDIGI
> >
> > MULTIPLE ; Set so that shared memory used by digi doesn't collide if multiple i>
> >
> > APRSCall=PD2SKZ-7
> >
> > StatusMsg=RPI iGate RX 144.800mhz JO22FA
> >
> > SYMBOL=I ; Icon to display for station.
> >
> > SYMSET=/ ; This is a "B" in a Red Diamond.
> >
> > APRSPath 1=APRS,WIDE1-1,WIDE2-1 ; Port 1 beacon
> >
> > APRSPath=3=APRS,WIDE1-1,WIDE2,1 ; Port 3 beacon
> >
> > GATEDPATH=1
> >
> > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
> >
> > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the call t>
> >
> > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is received >
> >
> > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is decremented.
> >
> > LAT=5200.40N ; Must be in standard APRS Format (ddmm.mmN/S)
> >
> > LON=00426.39E ; Must be in standard APRS Format (dddmm.mmE/W)
> >
> > ISHost=euro.aprs2.net ; noam.aprs.net for USA. APRS-IS Host Name. May be either>
> >
> > ISPort=14580 ; Normal port for a filtered feed
> >
> > ISPasscode=23215
> >
> > ISFilter=m/50 ; Filter Command if needed
> >
> > ***
> >
> > Any help please ? Thanks !
> >
> > Sven.
> >
Read previous mail | Read next mail
| |
