| |
PD2SKZ > BPQ32 24.10.23 23:07l 122 Lines 3101 Bytes #101 (0) @ WW
BID : 110_PD2SKZ
Read: GUEST
Subj: Re:APRS iGate
Path: IW8PGT<I3XTY<I0OJJ<N6RME<CX2SA<PI8ZTM
Sent: 230930/1403Z @:PI8ZTM.#ZH1.NLD.EURO #:28532 [Zoetermeer] $:110_PD2SKZ
From: PD2SKZ@PI8ZTM.#ZH1.NLD.EURO
To : BPQ32@WW
# Generated by: TstHWin v2.21b - Registered to PD2SKZ
# On : 30-9-2023 14:59:09
# UTC: 30-9-2023 12:59:09
Hi,
thanks for the quick reply.
This does not resolve the problem. The frames are not beeing sent to the
aprs2.net server.
Any other suggestions ?
Thanks !
Sven.
>R:230930/1339Z @:PI8ZTM.#ZH1.NLD.EURO #:28530 [Zoetermeer] FBB7.00i
>R:230930/1239Z 33893@PI8LAP.#ZLD.NLD.EURO LinBPQ6.0.23
>R:230930/1239Z 29345@PA8F.#ZH1.NLD.EURO LinBPQ6.0.24
>R:230930/1239Z 85871@VE3CGR.#SCON.ON.CAN.NOAM LinBPQ6.0.24
>R:230930/1239Z 11238@KF5JRV.#NWAR.AR.USA.NA BPQ6.0.23
>R:230930/1238Z 1701@WY7EMT.WY7EMT.AZ.USA.NOAM LinBPQ6.0.24
>R:230930/1238Z 2693@K7OI.AZ.USA.NOAM BPQ6.0.23
>R:230930/1237Z 7820@K5GEO.K5GE0.NM.USA.NOAM BPQK6.0.23
>
>
>I do not see the Digimap command in your config. i.e.,
>
>Digimap 1=1,IS
>
>You need this to direct port 1 aprs data to IS
>
>73! de K5GEO
>
>
>
>Original Message
>
>>
>> I see that you are missing the "digimap" command for mapping from port to IS:
>>
>> Digimap 1=1,IS
>>
>> 73!
>>
>> K5GEO
>>
>>
>>
>>
>> Original Message
>>
>> > R:230930/1020Z 15657@PE1RRR.#NBW.NLD.EURO LinBPQ6.0.24
>> > R:230930/1020Z 132@KC3SMW.#EPA.PA.USA.NOAM LinBPQ6.0.24
>> > R:230930/1118Z @:PI8ZTM.#ZH1.NLD.EURO #:28527 [Zoetermeer] FBB7.00i
>> > R:230930/1015Z @:PD2SKZ-3.#ZH1.NLD.EURO #:1895 [Pijnacker] $:1895_PD2SKZ
>> >
>> > From: PD2SKZ@PD2SKZ-3.#ZH1.NLD.EURO
>> > To : BPQ32@WW
>> >
>> > Hi all,
>> >
>> > im trying to setup an iGate with BPQ. Everything seems to be working fine. Except that when i receive a station vis RF, it doesnt get reported to the aprs2.net server.
>> >
>> > Here is my config:
>> >
>> > APRSDIGI
>> >
>> > MULTIPLE ; Set so that shared memory used by digi doesn't collide if multiple i>
>> >
>> > APRSCall=PD2SKZ-7
>> >
>> > StatusMsg=RPI iGate RX 144.800mhz JO22FA
>> >
>> > SYMBOL=I ; Icon to display for station.
>> >
>> > SYMSET=/ ; This is a "B" in a Red Diamond.
>> >
>> > APRSPath 1=APRS,WIDE1-1,WIDE2-1 ; Port 1 beacon
>> >
>> > APRSPath=3=APRS,WIDE1-1,WIDE2,1 ; Port 3 beacon
>> >
>> > GATEDPATH=1
>> >
>> > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
>> >
>> > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the call t>
>> >
>> > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is received >
>> >
>> > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is decremented.
>> >
>> > LAT=5200.40N ; Must be in standard APRS Format (ddmm.mmN/S)
>> >
>> > LON=00426.39E ; Must be in standard APRS Format (dddmm.mmE/W)
>> >
>> > ISHost=euro.aprs2.net ; noam.aprs.net for USA. APRS-IS Host Name. May be either>
>> >
>> > ISPort=14580 ; Normal port for a filtered feed
>> >
>> > ISPasscode=23215
>> >
>> > ISFilter=m/50 ; Filter Command if needed
>> >
>> > ***
>> >
>> > Any help please ? Thanks !
>> >
>> > Sven.
>> >
PD2SKZ @ PI8ZTM - Operator Sven
QRV on frequency 430.9125mhz 9k6 FM & 144.925mhz 1k2 FM
DF2FQ T7F (UHF) - Icom 7100 (VHF) - Symek TNC3S - Comet GP1N vertical
Locator JO22FA - Qth Pijnacker the Netherlands
Read previous mail | Read next mail
| |
