| |
N5MDT > BPQ32 25.10.23 13:51l 164 Lines 4293 Bytes #102 (0) @ WW
BID : 43882_N5MDT
Read: GUEST
Subj: Re:APRS iGate
Path: IW8PGT<I3XTY<I0OJJ<GB7CIP<GB7YEW<N5MDT
Sent: 231025/1148Z 43882@N5MDT.#STX.TX.USA.NOAM BPQ6.0.24
These lines are suspect to me...
APRSPath 1=APRS,WIDE1-1,WIDE2-1 ; Port 1 beacon
APRSPath=3=APRS,WIDE1-1,WIDE2,1 ; Port 3 beacon
GATEDPATH=1
What is port 1 and 3?
Assuming port 3 is your RF port then fix the syntax of the line. Too many "="
If port 1 is an AXIP or telnet port then you should not need that line.
The Digimap statement given by K5GEO is correct, but if your RF port is port 3 then change it to reflect port 3.
Digimap 3=3,IS
You could have two RF ports, I don't know. In the states we generally use only one frequency for APRS and so only have the one APRSPath statement. And we do not generally beacon APRS data on packet frequencies.
Mark
Original Message
> R:231024/2100Z 52225@GB7YEW.#79.GBR.EURO LinBPQ6.0.18
> R:231024/2100Z 50130@W0ARP.#NCO.CO.USA.NOAM LinBPQ6.0.24
> R:231024/2100Z 16970@PE1RRR.#NBW.NLD.EURO LinBPQ6.0.24
> R:230930/1403Z @:PI8ZTM.#ZH1.NLD.EURO #:28532 [Zoetermeer] $:110_PD2SKZ
>
> From: PD2SKZ@PI8ZTM.#ZH1.NLD.EURO
> To : BPQ32@WW
>
>
>
> # Generated by: TstHWin v2.21b - Registered to PD2SKZ
> # On : 30-9-2023 14:59:09
> # UTC: 30-9-2023 12:59:09
>
> Hi,
>
> thanks for the quick reply.
>
> This does not resolve the problem. The frames are not beeing sent to the
> aprs2.net server.
>
> Any other suggestions ?
>
> Thanks !
>
> Sven.
>
> >R:230930/1339Z @:PI8ZTM.#ZH1.NLD.EURO #:28530 [Zoetermeer] FBB7.00i
> >R:230930/1239Z 33893@PI8LAP.#ZLD.NLD.EURO LinBPQ6.0.23
> >R:230930/1239Z 29345@PA8F.#ZH1.NLD.EURO LinBPQ6.0.24
> >R:230930/1239Z 85871@VE3CGR.#SCON.ON.CAN.NOAM LinBPQ6.0.24
> >R:230930/1239Z 11238@KF5JRV.#NWAR.AR.USA.NA BPQ6.0.23
> >R:230930/1238Z 1701@WY7EMT.WY7EMT.AZ.USA.NOAM LinBPQ6.0.24
> >R:230930/1238Z 2693@K7OI.AZ.USA.NOAM BPQ6.0.23
> >R:230930/1237Z 7820@K5GEO.K5GE0.NM.USA.NOAM BPQK6.0.23
> >
> >
> >I do not see the Digimap command in your config. i.e.,
> >
> >Digimap 1=1,IS
> >
> >You need this to direct port 1 aprs data to IS
> >
> >73! de K5GEO
> >
> >
> >
> >Original Message
> >
> >>
> >> I see that you are missing the "digimap" command for mapping from port to IS:
> >>
> >> Digimap 1=1,IS
> >>
> >> 73!
> >>
> >> K5GEO
> >>
> >>
> >>
> >>
> >> Original Message
> >>
> >> > R:230930/1020Z 15657@PE1RRR.#NBW.NLD.EURO LinBPQ6.0.24
> >> > R:230930/1020Z 132@KC3SMW.#EPA.PA.USA.NOAM LinBPQ6.0.24
> >> > R:230930/1118Z @:PI8ZTM.#ZH1.NLD.EURO #:28527 [Zoetermeer] FBB7.00i
> >> > R:230930/1015Z @:PD2SKZ-3.#ZH1.NLD.EURO #:1895 [Pijnacker] $:1895_PD2SKZ
> >> >
> >> > From: PD2SKZ@PD2SKZ-3.#ZH1.NLD.EURO
> >> > To : BPQ32@WW
> >> >
> >> > Hi all,
> >> >
> >> > im trying to setup an iGate with BPQ. Everything seems to be working fine. Except that when i receive a station vis RF, it doesnt get reported to the aprs2.net server.
> >> >
> >> > Here is my config:
> >> >
> >> > APRSDIGI
> >> >
> >> > MULTIPLE ; Set so that shared memory used by digi doesn't collide if multiple i>
> >> >
> >> > APRSCall=PD2SKZ-7
> >> >
> >> > StatusMsg=RPI iGate RX 144.800mhz JO22FA
> >> >
> >> > SYMBOL=I ; Icon to display for station.
> >> >
> >> > SYMSET=/ ; This is a "B" in a Red Diamond.
> >> >
> >> > APRSPath 1=APRS,WIDE1-1,WIDE2-1 ; Port 1 beacon
> >> >
> >> > APRSPath=3=APRS,WIDE1-1,WIDE2,1 ; Port 3 beacon
> >> >
> >> > GATEDPATH=1
> >> >
> >> > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
> >> >
> >> > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the call t>
> >> >
> >> > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is received >
> >> >
> >> > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is decremented.
> >> >
> >> > LAT=5200.40N ; Must be in standard APRS Format (ddmm.mmN/S)
> >> >
> >> > LON=00426.39E ; Must be in standard APRS Format (dddmm.mmE/W)
> >> >
> >> > ISHost=euro.aprs2.net ; noam.aprs.net for USA. APRS-IS Host Name. May be either>
> >> >
> >> > ISPort=14580 ; Normal port for a filtered feed
> >> >
> >> > ISPasscode=23215
> >> >
> >> > ISFilter=m/50 ; Filter Command if needed
> >> >
> >> > ***
> >> >
> >> > Any help please ? Thanks !
> >> >
> >> > Sven.
> >> >
>
> PD2SKZ @ PI8ZTM - Operator Sven
> QRV on frequency 430.9125mhz 9k6 FM & 144.925mhz 1k2 FM
> DF2FQ T7F (UHF) - Icom 7100 (VHF) - Symek TNC3S - Comet GP1N vertical
> Locator JO22FA - Qth Pijnacker the Netherlands
>
Read previous mail | Read next mail
| |
