|
PD2SKZ > BPQ32 30.09.23 12:27l 53 Lines 1260 Bytes #77 (0) @ WW
BID : 1895_PD2SKZ
Read: GUEST
Subj: APRS iGate
Path: IW8PGT<I3XTY<GB7COW<KE0GB<VE3CGR<F4BWT<PI8ZTM<PD2SKZ-3
Sent: 230930/1015Z @:PD2SKZ-3.#ZH1.NLD.EURO #:1895 [Pijnacker] $:1895_PD2SKZ
From: PD2SKZ@PD2SKZ-3.#ZH1.NLD.EURO
To : BPQ32@WW
Hi all,
im trying to setup an iGate with BPQ. Everything seems to be working fine. Except that when i receive a station vis RF, it doesnt get reported to the aprs2.net server.
Here is my config:
APRSDIGI
MULTIPLE ; Set so that shared memory used by digi doesn't collide if multiple i>
APRSCall=PD2SKZ-7
StatusMsg=RPI iGate RX 144.800mhz JO22FA
SYMBOL=I ; Icon to display for station.
SYMSET=/ ; This is a "B" in a Red Diamond.
APRSPath 1=APRS,WIDE1-1,WIDE2-1 ; Port 1 beacon
APRSPath=3=APRS,WIDE1-1,WIDE2,1 ; Port 3 beacon
GATEDPATH=1
TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the call t>
MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is received >
MaxFloodHops=2 ; this, the value will be replaced BEFORE it is decremented.
LAT=5200.40N ; Must be in standard APRS Format (ddmm.mmN/S)
LON=00426.39E ; Must be in standard APRS Format (dddmm.mmE/W)
ISHost=euro.aprs2.net ; noam.aprs.net for USA. APRS-IS Host Name. May be either>
ISPort=14580 ; Normal port for a filtered feed
ISPasscode=23215
ISFilter=m/50 ; Filter Command if needed
***
Any help please ? Thanks !
Sven.
Read previous mail | Read next mail
| |