| |
PE1RRR > SYSOP 28.12.18 09:33l 47 Lines 1609 Bytes #999 (0) @ WW
BID : 1521PE1RRR
Read: GUEST
Subj: AX/IP links ruin lives (link request)
Path: IW8PGT<IR2UBX<SR1BSZ<OK0NBR<OK2PEN<N3HYM<LU4EGV<GB7YEW<GB7CIP<PE1RRR<
PE1RRR
Sent: 181227/2319z @:PE1RRR.#NBW.NLD.EURO Sally 7.2.012 [PE1RRR PMS] $:1521PE1R
Message from: PE1RRR@PE1RRR.#NBW.NLD.EURO
Hello dear OM Sysop
I have interest in providing additional bandwidth for your NODES broadcasts,
please direct healthy, reasonably configured QUALITY <150 UDP-based
connections to:
Address: z.red-heat.com
Port: 10093
Protocol: UDP
Callsign: PE1RRR-7
Quality Street
--------------
My maximum remote quality is 120, my local resouces broadcast at 128.
I do not rebroadcast any NODES below 30.
My NODESINTERVAL is 60. I hope to set a good example. Let me know if I am
not. :-)
For BPQ Sysops: MAP PE1RRR-7 z.red-heat.com udp 10093 B
I have (for the moment) AUTOADDMAP enabled, the link should come up
automatically. After I have manually checked new connections, they will have
their quality adjusted, and if found stable enough, can be locked in*
*Note: valuable, quality slots on my locked routes list are only provided to
systems with a working Dynamic-DNS for their dynamic IP. If you have such,
please send me a reply with your DDNS address information so that I can
add/update the mapping in my configuration. Those with static IP addresses-
its plain sailing for you. But please reply to let me know that you're the
holder of a static address so that I can drop a comment in my configuation
for when if things get complicated later down the line. :-)
BBS PE1RRR@PE1RRR.#NBW.NLD.EURO
73 Red. PE1RRR
__ __ __ __ __
|__)|_ /||__)|__)|__) _|_.|| | _ _ _ _
| |__ || \ | \ | \ _)|_||| |(_)\/(-_) \/(_)|_|
/ kinda <_<
Read previous mail | Read next mail
| |
