| |
I0OJJ > SYSOP 11.10.20 14:12l 141 Lines 5339 Bytes #999 (0) @ WW
BID : BAUI0OJJ_001
Read: GUEST
Subj: Re: K3CHB-1 SYSTEM UPDATE
Path: IW8PGT<I3XTY<I0OJJ
Sent: 201011/1209z @:I0OJJ.ITA.EU [Rome] obcm1.08-5-g2f4a
From: I0OJJ @ I0OJJ.ITA.EU (Gustavo)
To: SYSOP @ WW
X-Info: Sent with login password
X-Info: Received by SMTP-gateway
Hi Jimmy et al,
On 10/11/20 10:00 AM, k3chb@k3chb.#epa.pa.us.noam wrote:
> R:201011/1202z @:VE4KLM.#WPG.MB.CAN.NOAM [Winnipeg] $:114_K3CHB
> R:201011/0805Z 35984@VA3TOK.#SCON.ON.CAN.NOAM LinBPQ6.0.20
> R:201011/0805Z 37480@LU9DCE.TOR.BA.ARG.SOAM BPQ6.0.20
> R:201011/0805Z 1739@PY2BIL.SP.BRA.SOAM LinBPQ6.0.20
> R:201011/0803Z 5985@AL0Y.#NNJ.NJ.USA.NOAM BPQ6.0.20
> R:201011/0804Z 7064@GB7YEW.#79.GBR.EURO LinBPQ6.0.18
> R:201011/0801Z @:GB7CIP.#32.GBR.EURO #:8956 [Caterham Surrey GBR] $:114_K3CHB
> R:201011/0800Z @:K3CHB.#EPA.PA.US.NOAM #:114 [Mechanicsburg] $:114_K3CHB
>
> From: K3CHB@K3CHB.#EPA.PA.US.NOAM
> To : ALL@WW
>
> ving trouble where the bbs is not performing the scheduled
> maintaince every night correctly. In an attempt to remedy this problem
> the BBS has been reset to its initial install state.
>
> If you are a forwarding partner and have any issues, please send me a
> message so I can fix it. I apologize for the inconvience, but I am just
> sick of looking at old killed and archived messages that just linger on
> in the system.
>
> Thanks for your understanding.
>
> 73
>
> Jimmy
> K3CHB
>
> (No, it did not fix the issue....)
Short reply: *switch off* the xfbb and manually delete *all files*
in /usr/local/var/ax25/fbb and those located in 'mail' and 'binmail'
directories; leave untouched other directories.
Then restart xdfbb and reply 'yes' to all answers to re-create the
all system files. Naturally you have to re-create the setup for you
the sysop, and for all your PBBS partners.
Naturally tou have to have a functioning 'epurmess' executable which
don't crash and showing an equivalent reply as this below:
----------
Epurmess V7.0.9
TZ: not set - daylight: 1 - timezone: -3600 - time zone names: CET CEST
20-10-11 - Saves dirmes.sys file into dirmes.old file
Act Msg# TS Dim. To @ BBS From Date Datexp Subject
Read 101 B$ 1890 PROPAG@WW LU1HVK 20-10-11 20-10-11 PROPAGATION
HF 11 1
Saves into dirmes.old - Copies dirmes.new into dirmes.sys
File cleared : 0 private message(s)
: 1 bulletin message(s)
: 1 active message(s)
: 0 killed message(s)
: 1 total message(s)
: 0 archived message(s)
: 0 destroyed message(s)
: 0 Timed-out message(s)
: 0 No-Route message(s)
-----------
Getting the above, your problems will be solved :)
Now, other discoveries: apart the missing TZ, daylight, fault
indications, the 7.0.9 sources don'compile by using my compiler
gcc-9.3.0:
---------------
ar cru libxfbbd.a arbre.o autobin.o balise.o bidexms.o conf.o console.o
date.o devio.o dos_1.o dos_dir.o driver.o drv_aea.o drv_ded.o drv_hst.o
drv_kam.o drv_mod.o drv_pop.o drv_sock.o drv_tcp.o edit.o ems.o error.o
exec_pg.o fbb_conf.o fbb_orb.o fortify.o forward.o fwdovl1.o fwdovl2.o
fwdovl3.o fwdovl4.o fwdovl5.o fwdovl6.o fwdovl7.o fwdutil.o gesfic.o
ibm.o info.o init.o init_srv.o init_tnc.o initfwd.o initport.o k_tasks.o
kernel.o lzhuf.o maint_fw.o mbl_edit.o mbl_expo.o mbl_impo.o mbl_kill.o
mbl_lc.o mbl_list.o mbl_log.o mbl_menu.o mbl_opt.o mbl_prn.o mbl_read.o
mbl_rev.o mbl_stat.o mbl_sys.o mbl_user.o mblutil.o md5c.o modem.o
nomenc.o nouvfwd.o pac_crc.o pacsat.o qraloc.o redist.o rx25.o serv.o
serveur.o statis.o themes.o tnc.o tncio.o trait.o trajec.o trajovl.o
variable.o warning.o watchdog.o waveplay.o wp.o wp_mess.o wpserv.o
xfwd.o xmodem.o yapp.o fbb_conf.o
ranlib libxfbbd.a
gcc -D__ORB__ -g -O2 -o xfbbd xfbbd-xfbbd.o libxfbbd.a -lax25 -lm
/usr/bin/ld:
/usr/lib/gcc/i586-slackware-linux/9.3.0/../../../libax25.a(axutils.o):
in function `strupr':
/usr/local/src/ax25/linuxax25-master/libax25/lib/ax25/axutils.c:301:
multiple definition of `strupr';
libxfbbd.a(redist.o):/home/linfbb-install/fbb-7.0.9/src/redist.c:111:
first defined here
collect2: error: ld returned 1 exit status
make[4]: *** [Makefile:727: xfbbd] Error 1
make[4]: Leaving directory '/home/linfbb-install/fbb-7.0.9/src'
make[3]: *** [Makefile:880: all-recursive] Error 1
make[3]: Leaving directory '/home/linfbb-install/fbb-7.0.9/src'
make[2]: *** [Makefile:517: all] Error 2
make[2]: Leaving directory '/home/linfbb-install/fbb-7.0.9/src'
make[1]: *** [Makefile:372: all-recursive] Error 1
make[1]: Leaving directory '/home/linfbb-install/fbb-7.0.9'
make: *** [Makefile:313: all] Error 2
------------
The other fault is that after killing the above msg and then
restarting the 'maintenance' the 'epurmess.res' don't show
any activity about the killed/purged message (see below)...
but the bonus is that it result completely purget from the
'mail' directory.
----------
1602409384
File cleared : 0 private message(s)
: 0 bulletin message(s)
: 0 active message(s)
: 0 killed message(s)
: 0 total message(s)
: 0 archived message(s)
: 0 destroyed message(s)
: 0 Timed-out message(s)
: 0 No-Route message(s)
Start computing : 20-10-11 11:43
End computing : 20-10-11 11:43
------------
--
73 and ciao, gustavo i0ojj/ir0aab/ir0eq
Read previous mail | Read next mail
| |
