| |
G8MNY > TECH 08.10.14 11:19l 46 Lines 1881 Bytes #999 (0) @ WW
BID : 12060_GB7CIP
Read: GUEST
Subj: DC/RF Sensing PA Switching
Path: IW8PGT<IZ3LSV<IR1UAW<IW2OHX<IQ2LB<IK1NHL<IQ5KG<I0OJJ<GB7CIP
Sent: 141008/0832Z @:GB7CIP.#32.GBR.EURO #:12060 [Caterham Surrey GBR]
From: G8MNY@GB7CIP.#32.GBR.EURO
To : TECH@WW
By G8MNY (Graphics updated Dec 03)
(8 Bit ASCII graphics use code page 437 or 850, Terminal Font)
For PA with RF/DC sense switching (as some rigs put out DC on Tx), that used a
diode to detect any +ve signals (RF/DC) on the transceiver to operate the PA
PTT system....
The time constants are ok for SSB & FM, but 22uF can be omitted for FM only.
TR1 & 2 BC107 etc, TR3 a TIP type PNP, D1 RF diode 1N4148 etc. D2 1N4001.
RigÄÂÄÄÄÄÂÄÄ´ÃÄÄÄÄ> RF to Drive Relay
³ _³_ 1n
³ \_/ ______+12-24V
³ ³D1 ³/e
100k ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄ´ TR3
³ 22k ³ ³ ³\ PNP
³ ³ ³ Ext oÄÄ¿ 330 ³ +Tx
³ ³ ³/ PTT ³ LED ³ ÃÄÄÄÄ> Drive, O/P,
³ ÃÄÄÄÄ´ TR1 ÃÄÄÄÄ´<ÃÄÄÙ ³ Bias, &
³ ³ ³\e ³/ ³ Fan Relays
³ === ÃÄÄ47kÄÂÄÄÄÄ´ TR2 ³
³ ³10n ³+ ³ ³\e ³
³ ³ === ÃÄÄÄÄÄÄ)ÄÄÄÄ150kÄÄÄÄÄÄÄÄ´
³ ³ ³22u ³ ³ +ve _³_
³ ³ ³ 10k ³ feedback /_\
³ ³ ³ ³ ³ D2 ³
ÄÁÄÄÄÄÁÄÄÄÄÄÄÁÄÄÄÄÄÄÁÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄ
HOW IT WORKS
D1 detects RF & passes any DC to turn on TR1. TR1 turning on charges up the
22uF & makes TR3 initially conduct to give fast Tx attack. When 22uF is over
2V TR2 is turned on & passes higher base current into TR3 via a Tx LED ensuring
it is well turned on. The 150k +ve feedback ensure snap action.
External PTT earth can be put in/out on TR2 collector.
I have found it was heat sensitive, due to the sensitivity of the 1st NPN.
Why Don't U send an interesting bul?
73 De John, G8MNY @ GB7CIP
Read previous mail | Read next mail
| |
