| |
G8MNY > TECH 21.11.19 09:01l 46 Lines 1533 Bytes #999 (0) @ WW
BID : 32191_GB7CIP
Read: GUEST
Subj: Splitting a floating PSU
Path: IW8PGT<IR2UBX<IW2OHX<IR1UAW<I0OJJ<I0OJJ<GB7CIP
Sent: 191121/0655Z @:GB7CIP.#32.GBR.EURO #:32191 [Caterham Surrey GBR]
>From g8mny%gb7cip.#32.gbr.euro@i0ojj.ampr.org Thu Nov 21 08:00:43 2019
Received: from i0ojj.ampr.org by i0ojj.ampr.org (JNOS2.0m-uro) with SMTP
id AA36601 ; Thu, 21 Nov 2019 08:00:43 +0100
Message-Id: <32191_GB7CIP@i0ojj.bbs>
>From: g8mny@gb7cip.#32.gbr.euro
X-JNOS-User-Port: Telnet (i0ojj @ 44.134.32.240) -> Sending message
From: G8MNY@GB7CIP.#32.GBR.EURO
To : TECH@WW
By G8MNY (New Aug 06)
(8 Bit ASCII graphics use code page 437 or 850, Terminal Font)
Here is a simple way to spit a single floating power supply into +/- rails. It
can be for any voltage 6V-100V to give ñ3V to ñ50V.
ÚÄÄÄÄÄÄÄÄ¿ +
³ ÃÄÄÄÄÂÄÄÄÄÂÄÄÄ>+ve
³Floating³ 1k ³/
³ ³ ÃÄÄ´NPN
³ Power ³ _³_ ³\e
³ ³ D1\_/ ÃÄÄÄ>0V
³ Supply ³ ³ ³/e
³ ³ ÃÄÄ´PNP
³ ³ 1k ³\
³ ÃÄÄÄÄÁÄÄÄÄÁÄÄÄ>-ve
ÀÄÄÄÄÄÄÄÄÙ -
The asymmetrical currents & voltages will affect the components needed (e.g.
transistors have to handle peak offset current & heat), in some applications,
e.g. value of 1k R may be 39k on 100V. Higher currents may need darlings or
P & N ch MOSFETs.
The above circuit should provide adequate balance for testing most things that
need a balanced supply.
D1 provides some cross over bias keeping the transistors in class B, 2 diodes
in series may do better but easy to get into class AB/A & get hot when this is
not needed!
Y Don't U send an interesting bul?
73 de John G8MNY @ GB7CIP
Read previous mail | Read next mail
| |
