| |
YT7MPB > TECH 25.01.23 15:51l 69 Lines 2456 Bytes #999 (0) @ WW
BID : 57793_YT7MPB
Read: GUEST
Subj: Re: Yaesu FT-991A: CAT via SCS modems?
Path: IW8PGT<IZ3LSV<I3XTY<I0OJJ<EA2RCF<LU9DCE<KD6MTU<W9GM<N3HYM<YT7MPB
Sent: 230125/1348Z 57793@YT7MPB.#NSD.SRB.EU LinBPQ6.0.23
On Mon, 23 Jan 23 15:36:00 Z
G4APL wrote:
> R:230123/1540Z @:N6RME.#NCA.CA.USA.NOAM #:4191 [El Dorado]
> $:43374G4APL R:230123/1540z @:I0OJJ.ITA.EU $:43374G4APL
> R:230123/1540Z @:EA2RCF.EAVI.ESP.EU #:39124 [Vitoria] $:43374G4APL
> R:230123/1540Z 3149@LU9DCE.TOR.BA.ARG.SOAM LinBPQ6.0.23
> R:230123/1539Z 65980@VE3CGR.#SCON.ON.CAN.NOAM LinBPQ6.0.23
> R:230123/1539Z 1602@VE3VTY.#CON.ON.CAN.NOAM LinBPQ6.0.23
> R:230123/1539Z @:PE1RRR.#NBW.NLD.EURO #:8472 [Rijen] $:43374G4APL
> R:230123/1537Z @:GB7CIP.#32.GBR.EURO #:39036 [Caterham Surrey GBR]
> $:43374G4APL R:230123/1536Z @:GB7CIP.#32.GBR.EURO [Caterham, IO91WH]
> Linux mailgw-0.3.1.8 R:230123/1536Z @:GB7CIP.#32.GBR.EURO $:43374G4APL
> T:From: Paul Lewis <g4apl@gb7cip.ampr.org>
> T:Newsgroups: ampr.rec.tech
> T:Message-Id: <tqm9ep$sj1$1@gb7cip.ampr.org>
>
> yt7mpb%yt7mpb.#nsd.srb.eu@gb7cip.ampr.org wrote:
> >
> > I wonder whether it is possible to control the radio frequency and
> > other parameters of FT-991 via SCS DR-7400 pactor controller. In
> > fact, FT-991 is not listed among Yaesu radios (in the controller's
> > memory/firmware), so I wonder whether someone made it working that
> > way.
>
> Looking at the FT-991A Cat Operation Manual
> the parameters.
>
> The data Look the same format as in the
> Kenwood's TS-480SAT PC Control Commands manual.
>
> When comparing both manuals and control fields
> I have only use Kenwood TS-480Sats for remote control.
>
> the next question
> Going back to 'Basics'
>
> Can you drive the ft991 entering the commands manually
> as a test using
> Alpha4
> or
> NCWINPTC
> communication programes
>
> and get remote command response via the controller and radio
> 73 de Paul g4apl/gb7cip
>
Paul, thank you for information on your Kenwood TS-480SAT. I will try to
test FT-991 by using TS-480SAT as the parameter in the SCS controller.
(I did not check yet whether TS-480SAT was listed in the SCS
internal menu, but suppose it is there.)
By the way, I did not try to test FT-991A by using any of those
software, and only tried from the command line (minicom in Linux). I
only got a response from the controller that, for example, the
frequency was changed, but in reality the radio did not change QRG.
That FT-991A that I used for test was not mine, but from another ham.
So I need to collect some more info before I ask the other ham to bring
in the radio from his home location HI HI ...
--
73 de Misko YT7MPB@YU7BPQ.#NSD.SRB.EU
Read previous mail | Read next mail
| |
